fbpx

Cat® C2.2 Industrial Power Unit 15878

Cat® C2.2 Industrial Power Unit
15878 Cat<sup>®</sup> C2.2 Industrial Power Unit

The Cat® C2.2 Industrial Power Unit is offered in the following rating: 36.4 bkW (48.8 bhp) @ 2800-3000 rpm. This rating meets U.S. EPA Tier 4 Final, EU Stage IIIA emission standards. Ratings: 44.7-45.5 bkW (59.9-61.0 bhp) @ 2800-3000 rpm meet U.S. EPA Tier 4 Final, EU Stage IIIB emission standards. Conveniently pre-configured for a wide range of applications, the Cat® Industrial Power Unit is a complete power package containing a radiator, flywheel, alternator and alternator wiring completely pre-assembled for fast, straightforward installation in a number of OEM, customer and packager applications. These fuel efficient units are ready made for irrigation, industrial, mining and other pump applications.

CAT
Price: Request a Quote

The Cat® C2.2 Industrial Power Unit is offered in the following rating: 36.4 bkW (48.8 bhp) @ 2800-3000 rpm. This rating meets U.S. EPA Tier 4 Final, EU Stage IIIA emission standards. Ratings: 44.7-45.5 bkW (59.9-61.0 bhp) @ 2800-3000 rpm meet U.S. EPA Tier 4 Final, EU Stage IIIB emission standards. Conveniently pre-configured for a wide range of applications, the Cat® Industrial Power Unit is a complete power package containing a radiator, flywheel, alternator and alternator wiring completely pre-assembled for fast, straightforward installation in a number of OEM, customer and packager applications. These fuel efficient units are ready made for irrigation, industrial, mining and other pump applications.

Maximum Power
61 HP
Maximum Torque
143.8 lb-ft @ 1800 rpm
Emissions
U.S. EPA Tier 4 Interim, EU Stage IIIA
Rated Speed
2800-3000 rpm

Power Rating

Maximum Power
61HP
Maximum Torque
143.8lb-ft @ 1800 rpm
Rated Speed
2800-3000 rpm
Minimum Power
48.7HP

Emission Standards

Emissions
U.S. EPA Tier 4 Interim, EU Stage IIIA

General

Engine Configuration
Inline 4, 4-Stroke-Cycle Diesel
Bore
3.3in
Stroke
3.9in
Displacement
135in³
Compression Ratio
23.3:1
Aspiration
Naturally Aspirated (NA) or Turbocharged (T)
Rotation from Flywheel End
Counterclockwise
Aftertreatment
DOC+DPF

Power Unit Dimensions

Length
38.2in
Width
23.2in
Height
38.3in
Weight
502lb

Aftertreatment Dimensions*

Diameter
7.8in

Aftertreatment Dimensions

Weight
35.3lb

Standard Equipment:

  • Air Inlet System
    • Inlet manifold
  • Control System
    • Alternator 12 volt 65 amp
    • Tier 4 Final: Alternator 12V 85 amp
    • Starter motor 12 volt
    • Glow plug starting aid
  • Cooling System
    • Belt-driven coolant pump
    • Coolant temperature switch
    • Mounted air cleaner
    • Mounted radiator and fan
  • Flywheels And Flywheel Housing
    • SAE No. 7 1/2 flywheel
    • SAE No. 4 flywheel housing
  • Fuel System
    • Fuel injection pump
    • Spin-on fuel filter
    • Electronic Shut-off Solenoid (ESOS)
  • Lube System
    • Spin-on lube oil filter
    • Lube oil pressure switch
    • Lube oil sump
  • Power Take Off (pto)
    • Provision for Power Take Off (PTO)
    • SAE A PTO drive (Tier 4 Final, Stage IV)
  • General
    • Cast iron, engine block
    • Cast iron exhaust manifold--side outlet
    • Cold start capability to -20° C (-4° F)
    • Gradeability 35° continuous
    • Paint: Caterpillar yellow, with optional colors available at request
  • U.s. Epa Tier 4 Final, Eu Stage Iiib Aftertreatment/clean Emissions Control Equipment
    • Diesel Particulate Filter (DPF) with range of outlet options
    • Diesel Oxidation Catalyst (DOC)
    • Passive regeneration system with backup

Optional Equipment:

    Specifications

    Power Rating

    Maximum Power
    61HP
    Maximum Torque
    143.8lb-ft @ 1800 rpm
    Rated Speed
    2800-3000 rpm
    Minimum Power
    48.7HP

    Emission Standards

    Emissions
    U.S. EPA Tier 4 Interim, EU Stage IIIA

    General

    Engine Configuration
    Inline 4, 4-Stroke-Cycle Diesel
    Bore
    3.3in
    Stroke
    3.9in
    Displacement
    135in³
    Compression Ratio
    23.3:1
    Aspiration
    Naturally Aspirated (NA) or Turbocharged (T)
    Rotation from Flywheel End
    Counterclockwise
    Aftertreatment
    DOC+DPF

    Power Unit Dimensions

    Length
    38.2in
    Width
    23.2in
    Height
    38.3in
    Weight
    502lb

    Aftertreatment Dimensions*

    Diameter
    7.8in

    Aftertreatment Dimensions

    Weight
    35.3lb

    Standard/Optional Features

    Standard Equipment:

    • Air Inlet System
      • Inlet manifold
    • Control System
      • Alternator 12 volt 65 amp
      • Tier 4 Final: Alternator 12V 85 amp
      • Starter motor 12 volt
      • Glow plug starting aid
    • Cooling System
      • Belt-driven coolant pump
      • Coolant temperature switch
      • Mounted air cleaner
      • Mounted radiator and fan
    • Flywheels And Flywheel Housing
      • SAE No. 7 1/2 flywheel
      • SAE No. 4 flywheel housing
    • Fuel System
      • Fuel injection pump
      • Spin-on fuel filter
      • Electronic Shut-off Solenoid (ESOS)
    • Lube System
      • Spin-on lube oil filter
      • Lube oil pressure switch
      • Lube oil sump
    • Power Take Off (pto)
      • Provision for Power Take Off (PTO)
      • SAE A PTO drive (Tier 4 Final, Stage IV)
    • General
      • Cast iron, engine block
      • Cast iron exhaust manifold--side outlet
      • Cold start capability to -20° C (-4° F)
      • Gradeability 35° continuous
      • Paint: Caterpillar yellow, with optional colors available at request
    • U.s. Epa Tier 4 Final, Eu Stage Iiib Aftertreatment/clean Emissions Control Equipment
      • Diesel Particulate Filter (DPF) with range of outlet options
      • Diesel Oxidation Catalyst (DOC)
      • Passive regeneration system with backup

    Optional Equipment: