fbpx

TL642 Telehandler 14056

TL642 Telehandler
14056 TL642 Telehandler

The TL642 is precision engineered to handle any task, offering stability, maneuverability, speed and power in any application.

CAT
Telehandlers
Price: Request a Quote

The TL642 is precision engineered to handle any task, offering stability, maneuverability, speed and power in any application.

Rated Load Capacity
6,500 lb
Maximum Lift Height
42 ft
Engine Model
Cat® C3.6L
Operating Weight
22,002 lb

Operating Specifications

Rated Load Capacity
6,500 lb
Maximum Lift Height
42 ft
Maximum Forward Reach
30 ft
Top Travel Speed
19 mile/h
Capacity at Maximum Reach
700 lb
Drawbar Pull - Loaded
20,670 lbf
Turning Radius - Over Tires
12 ft
Frame Leveling
10°
Capacity at Maximum Height
6,500 lb

Engine

Engine Model
Cat® C3.6L
Gross Power - Basic
73.7 hp
Note
Meets U.S. EPA Tier 4 Final emission standards.

Weights

Operating Weight
22,002 lb

Dimensions

Height
8 ft
Width
8 ft
Wheel Base
11.25 ft
Length - Fork Face
18.5 ft
Ground Clearance
17 in
Turning Radius - Over Tires
12 ft

Tires

Standard
370/75-28 Duraforce Air
Optional (1)
370/75-28 Duraforce Foam Fill
Optional (2)
315/95-28 Telemaster Solid
Optional (3)
13.00-24 16PR Air
Optional (4)
13.00-24 12PR Foam
Optional (5)
370/75-28 Non-Marking Air
Optional
370/75-28 Non-Marking Foam

Service Refill Capacities

Fuel Tank
38.3 gal (US)
Hydraulic System
42 gal (US)

Boom Performance

Boom Up
15 s
Boom Down
10.3 s
Tele In
9.5 s
Tele Out
16.3 s

Work Tools

Pallet Forks - Option 2
[2] 1,220 mm, 60 mm × 100 mm ([2] 48 in, 2.36 in × 4 in)
Pallet Forks - Option 3
[2] 1,829 mm, 60 mm × 150 mm ([2] 72 in, 2.36 in × 6 in)
Pallet Forks - Option 1
[2] 1,220 mm, 60 mm × 125 mm ([2] 48 in, 2.36 in × 5 in)
Cubing Forks
[2] 1,220 mm, 50 mm × 50 mm ([2] 48 in, 2 in × 2 in)
Carriages - Standard Tilt
50 in
Carriages - Side Shift
50 in
Carriages - Swing
100°, 1,829 mm, 2,948 kg Capacity, 2,268 kg Swung (100°, 72 in, 6,500 lb Capacity, 5,000 lb Swung)
Lumber Forks - Option 1
[2] 1,525 mm, 45 mm × 180 mm ([2] 60 in, 1.75 in × 7 in)
Carriages - Dual Fork Positioning
50 in

Axles

Type (1)
Trunnion mounted planetary 55 degree steer axles.
Type (2)
High bias limited slip differential on front axle.

Transmission Speeds

Forward
4 speed
Reverse
3 speed

Hydraulic System

Auxiliary Hydraulic Flow
18 gal/min
Auxiliary Hydraulic Pressure
3,481 psi
Gear Pump
Single-section

Braking System

Service Brakes
Inboard wet disc brakes on front and rear axles
Parking Brakes
Wet disc, spring applied hydraulic release on front axle

Standard Equipment:

  • Telescopic Boom
    • Boom angle indicator
  • Electrical
    • Alternator, 60 amp, 12 volt
    • Battery, 12 volt, 1000 CCA
    • Horn
    • Alarm, backup
  • Operator Station
    • Canopy, ROPS/FOPS
    • Joystick, single electronic
    • Adjustable joystick wristrest
    • Low step, grab bars for easy entry
    • Seat - vinyl, suspension with Cat logo
    • Steering wheel spinner knob
    • Floor mat - heavy duty
    • Left side rear view mirror
    • Service door, cab air intake filter, fuel fill, hydraulic fill, level indicator, fuse panel and washer fill
    • Instruments - volt meter, hourmeter, engine oil pressure gauge, water temperature gauge. All gauges protected by clear acrylic cover.
    • Park Brake with indicator light
    • Steering Wheel with Cat logo
    • Cat keys and locks
    • Brakes - wet disc service
  • Power Train
    • Engine,Cat® C3.6L (73.7 hp)
    • Thermal starting aid
    • Transmission, 4-speed forward, 3-speed reverse
    • Cat filters, hoses and couplings
    • Axles - Dana
    • Steering - 4 wheel
    • Parking brake with indicator light
    • Drive - 4 wheel
  • Structure
    • Chassis, frame level up to 10 degrees when operating in rough, uneven terrain
    • Cat IT Coupler
  • Anti-freeze
    • Coolant - Anti-freeze, 50/50 Mix
  • Tires
    • Tires - 370/75-28 Duraforce Air
  • Other Equipment
    • Integrated lift and tie down points
    • Standard Cat color paint
    • Auxillary hydraulics for auxillary attachments (one function)

Optional Equipment:

  • Telescopic Boom
    • Hydraulic IT Coupler (includes Auxiliary Electrics)
  • Electrical
    • Work Light Group: 2 Cab mounted headlights -- 2 forward, 1 rearward; 1 Reversing Light; 2 Boom Mounted Lights, 1 Rotating Beacon
    • Engine heater block
    • Heater - open cab
    • Road Light Group -- Headlights, Brake Lights, Turn Signals
  • Operator Station
    • Air conditioning
    • Auxiliary hydraulics for Hydraulic Work Tools (one function)
    • Single Joystick - with Rocker Switch
    • EROPS - Cab Enclosure (Door, Safety Glass Windows, Front Windshield Wiper, Heater & Defroster Fan)
    • Skylight Wiper
    • Brick Guard - Top and front.
  • Tires
    • Tires - 13.00-24 12PR Foam
    • Tires - 13.00-24 16PR Air
    • Tires - 370/75-28 Duraforce Foam Fill
    • Tires - 370/75-28 Non-Marking Air
    • Tires - 315/95-28 Telemaster Solid
  • Other Equipment
    • Fenders
    • Tow Hook - Pintle Type
    • Instant Hook - 4000 lb capacity, boom head mounted winch
    • Outriggers
    • Artic package - Package includes: 2400 AMP starter, 1000 watt hydraulic reservoir heater, 500 watt engine oil-pan heater, Dual maintenance free, 1375 CCA gel cell batteries, 160 watt battery heating blanket, 1000 watt engine block heater.
  • Work Tools
    • Access Work Platform - 8 ft x 4 ft; 1,000 maximum capacity (available from factory)
    • Carriage - side shift, 50 in. (available from factory)
    • Lifting Hook - fork mounted (available from factory)
    • Truss Broom
    • Carriage - standard tilt, 50 in. (available from factory)
    • Carriage - wide tilt, 72 in. (available from factory)
    • Carriage - standard rotate, 50 in. (available from factory)
    • Carriage - swing, 72 in., 100 degrees, 6000 lb capacity, 5000 lb swung (available from factory)
    • Pallet Forks - two 60 in, 2 in x 6 in, capacity per pair 6600 lb (available from factory)
    • Pallet Forks - two 48 in, 2.36 in x 4 in, capacity per pair 6600 lb (available from factory)
    • Cubing Forks - two 48 in, 2 in x 2 in, capacity per pair 3800 lb (available from factory)
    • Bucket - General Purpose 1.3 Cu. Yd.
    • Bucket - Material Handling 1.95 Cu. Yd.
    • Bucket - Multi-Purpose, 1.3 Cu. Yd.

Specifications

Operating Specifications

Rated Load Capacity
6,500 lb
Maximum Lift Height
42 ft
Maximum Forward Reach
30 ft
Top Travel Speed
19 mile/h
Capacity at Maximum Reach
700 lb
Drawbar Pull - Loaded
20,670 lbf
Turning Radius - Over Tires
12 ft
Frame Leveling
10°
Capacity at Maximum Height
6,500 lb

Engine

Engine Model
Cat® C3.6L
Gross Power - Basic
73.7 hp
Note
Meets U.S. EPA Tier 4 Final emission standards.

Weights

Operating Weight
22,002 lb

Dimensions

Height
8 ft
Width
8 ft
Wheel Base
11.25 ft
Length - Fork Face
18.5 ft
Ground Clearance
17 in
Turning Radius - Over Tires
12 ft

Tires

Standard
370/75-28 Duraforce Air
Optional (1)
370/75-28 Duraforce Foam Fill
Optional (2)
315/95-28 Telemaster Solid
Optional (3)
13.00-24 16PR Air
Optional (4)
13.00-24 12PR Foam
Optional (5)
370/75-28 Non-Marking Air
Optional
370/75-28 Non-Marking Foam

Service Refill Capacities

Fuel Tank
38.3 gal (US)
Hydraulic System
42 gal (US)

Boom Performance

Boom Up
15 s
Boom Down
10.3 s
Tele In
9.5 s
Tele Out
16.3 s

Work Tools

Pallet Forks - Option 2
[2] 1,220 mm, 60 mm × 100 mm ([2] 48 in, 2.36 in × 4 in)
Pallet Forks - Option 3
[2] 1,829 mm, 60 mm × 150 mm ([2] 72 in, 2.36 in × 6 in)
Pallet Forks - Option 1
[2] 1,220 mm, 60 mm × 125 mm ([2] 48 in, 2.36 in × 5 in)
Cubing Forks
[2] 1,220 mm, 50 mm × 50 mm ([2] 48 in, 2 in × 2 in)
Carriages - Standard Tilt
50 in
Carriages - Side Shift
50 in
Carriages - Swing
100°, 1,829 mm, 2,948 kg Capacity, 2,268 kg Swung (100°, 72 in, 6,500 lb Capacity, 5,000 lb Swung)
Lumber Forks - Option 1
[2] 1,525 mm, 45 mm × 180 mm ([2] 60 in, 1.75 in × 7 in)
Carriages - Dual Fork Positioning
50 in

Axles

Type (1)
Trunnion mounted planetary 55 degree steer axles.
Type (2)
High bias limited slip differential on front axle.

Transmission Speeds

Forward
4 speed
Reverse
3 speed

Hydraulic System

Auxiliary Hydraulic Flow
18 gal/min
Auxiliary Hydraulic Pressure
3,481 psi
Gear Pump
Single-section

Braking System

Service Brakes
Inboard wet disc brakes on front and rear axles
Parking Brakes
Wet disc, spring applied hydraulic release on front axle

Standard/Optional Features

Standard Equipment:

  • Telescopic Boom
    • Boom angle indicator
  • Electrical
    • Alternator, 60 amp, 12 volt
    • Battery, 12 volt, 1000 CCA
    • Horn
    • Alarm, backup
  • Operator Station
    • Canopy, ROPS/FOPS
    • Joystick, single electronic
    • Adjustable joystick wristrest
    • Low step, grab bars for easy entry
    • Seat - vinyl, suspension with Cat logo
    • Steering wheel spinner knob
    • Floor mat - heavy duty
    • Left side rear view mirror
    • Service door, cab air intake filter, fuel fill, hydraulic fill, level indicator, fuse panel and washer fill
    • Instruments - volt meter, hourmeter, engine oil pressure gauge, water temperature gauge. All gauges protected by clear acrylic cover.
    • Park Brake with indicator light
    • Steering Wheel with Cat logo
    • Cat keys and locks
    • Brakes - wet disc service
  • Power Train
    • Engine,Cat® C3.6L (73.7 hp)
    • Thermal starting aid
    • Transmission, 4-speed forward, 3-speed reverse
    • Cat filters, hoses and couplings
    • Axles - Dana
    • Steering - 4 wheel
    • Parking brake with indicator light
    • Drive - 4 wheel
  • Structure
    • Chassis, frame level up to 10 degrees when operating in rough, uneven terrain
    • Cat IT Coupler
  • Anti-freeze
    • Coolant - Anti-freeze, 50/50 Mix
  • Tires
    • Tires - 370/75-28 Duraforce Air
  • Other Equipment
    • Integrated lift and tie down points
    • Standard Cat color paint
    • Auxillary hydraulics for auxillary attachments (one function)

Optional Equipment:

  • Telescopic Boom
    • Hydraulic IT Coupler (includes Auxiliary Electrics)
  • Electrical
    • Work Light Group: 2 Cab mounted headlights -- 2 forward, 1 rearward; 1 Reversing Light; 2 Boom Mounted Lights, 1 Rotating Beacon
    • Engine heater block
    • Heater - open cab
    • Road Light Group -- Headlights, Brake Lights, Turn Signals
  • Operator Station
    • Air conditioning
    • Auxiliary hydraulics for Hydraulic Work Tools (one function)
    • Single Joystick - with Rocker Switch
    • EROPS - Cab Enclosure (Door, Safety Glass Windows, Front Windshield Wiper, Heater & Defroster Fan)
    • Skylight Wiper
    • Brick Guard - Top and front.
  • Tires
    • Tires - 13.00-24 12PR Foam
    • Tires - 13.00-24 16PR Air
    • Tires - 370/75-28 Duraforce Foam Fill
    • Tires - 370/75-28 Non-Marking Air
    • Tires - 315/95-28 Telemaster Solid
  • Other Equipment
    • Fenders
    • Tow Hook - Pintle Type
    • Instant Hook - 4000 lb capacity, boom head mounted winch
    • Outriggers
    • Artic package - Package includes: 2400 AMP starter, 1000 watt hydraulic reservoir heater, 500 watt engine oil-pan heater, Dual maintenance free, 1375 CCA gel cell batteries, 160 watt battery heating blanket, 1000 watt engine block heater.
  • Work Tools
    • Access Work Platform - 8 ft x 4 ft; 1,000 maximum capacity (available from factory)
    • Carriage - side shift, 50 in. (available from factory)
    • Lifting Hook - fork mounted (available from factory)
    • Truss Broom
    • Carriage - standard tilt, 50 in. (available from factory)
    • Carriage - wide tilt, 72 in. (available from factory)
    • Carriage - standard rotate, 50 in. (available from factory)
    • Carriage - swing, 72 in., 100 degrees, 6000 lb capacity, 5000 lb swung (available from factory)
    • Pallet Forks - two 60 in, 2 in x 6 in, capacity per pair 6600 lb (available from factory)
    • Pallet Forks - two 48 in, 2.36 in x 4 in, capacity per pair 6600 lb (available from factory)
    • Cubing Forks - two 48 in, 2 in x 2 in, capacity per pair 3800 lb (available from factory)
    • Bucket - General Purpose 1.3 Cu. Yd.
    • Bucket - Material Handling 1.95 Cu. Yd.
    • Bucket - Multi-Purpose, 1.3 Cu. Yd.

Tags