The Cat® D1 delivers superior performance and the broadest choice of technology features to help you get the most from your dozer. Nimble and responsive, it has power for dozing and finesse for grading. Fully hydrostatic transmission gives you seamless acceleration, so you can get the job done quickly. The load sensing system automatically optimizes ground speed based on load, for the greatest productivity and fuel efficiency.
|
|
|
|
|
|
|
|
Engine
- Engine Model
- Cat C3.6
- Power - Net
- 80 hp
- Displacement
- 220 in³
- Net Power - 2,200 rpm - SAE J1349
- 80 hp
- Net Power - 2,200 rpm - ISO 9249/EEC 80/1269
- 80 hp
- Power Train
- Hydrostatic
- Note (1)
- Net power is tested per ISO 9,249:2,007 and SAE J1,349:2,011 and as advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator.
- Note (2)
- All non-road U.S. EPA Tier 4 Final, EU Stage V, Japan 2,014 (Tier 4 Final) and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less.
Weights
- Operating Weight
- 17,855 lb
- Operating Weight - LGP
- 18,839 lb
- Note (1)
- Specifications shown are for machine equipped with dozer blade, EROPS cab, back-up alarm, operator, coolant, lubricants and full fuel tank.
- Operating Weight - LGP, 762 mm/30 in
- 19,295 lb
- Note (2)
- For machine with ripper, add 554 kg (1,222 lb).
Transmission
- Drive Pumps
- 1
- Maximum Travel Speed - Reverse
- 6.2 mile/h
- Relief Valve Settings
- 7,033 psi
- Maximum Travel Speed - Forward
- 5.6 mile/h
- Track Motors
- 2
Hydraulic Controls
- Pump Output
- 17.2 gal/min
- Relief Valve Settings
- 2,988 psi
Ripper
- Type
- Parallelogram
- Number of Shanks
- 3
- Height
- 6.5 in
- Weight
- 1,222 lb
- Maximum Ground Clearance Under Tip
- 17.6 in
- Maximum Digging Depth
- 13.3 in
- Overall Width
- 67.3 in
- Maximum Reach - Ground Line
- 30.2 in
Cab
- FOPS
- ISO 3,449:2,005 Level II
- ROPS
- ISO 3,471:2,008
Undercarriage
- Length - Track on Ground - LGP, 762 mm (30 in)
- 89 in
- Length - Track on Ground - LGP
- 89 in
- Track Gauge - LGP
- 68 in
- Shoe Width - LGP, 762 mm (30 in)
- 30 in
- Track Gauge - LGP, 762 mm (30 in)
- 73 in
- Shoe Width - LGP
- 25 in
- Track Gauge
- 59 in
- Shoe Width - Standard
- 16 in
- Ground Pressure - LGP
- 4.3 psi
- Ground Pressure - LGP, 762 mm (30 in)
- 3.7 psi
- Number of Shoes - Each Side - Sealed and Lubricated Track (SALT) Undercarriage
- 43
- Number of Rollers - Each Side
- 6
- Length of Track on Ground
- 89 in
- Number of Shoes - Each Side - Abrasion Undercarriage
- 38
- Ground Pressure
- 6.45 psi
Service Refill Capacities
- Final Drive - Each - LGP
- 2.6 gal (US)
- Cooling System
- 4.2 gal (US)
- Diesel Exhaust Fluid (DEF) Tank
- 4.9 gal (US)
- Transmission - Hydraulic Tank
- 23.8 gal (US)
- Crankcase - With Filter
- 2.8 gal (US)
- Fuel Tank
- 51.5 gal (US)
- Final Drives - Each Side
- 2.6 gal (US)
Air Conditioning System
- Air Conditioning
- The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1,430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.
Dimensions
- BLADE: Blade Capacity (SAE) - LGP
- 2.17 yd³
- BLADE: Blade Lift Height - LGP
- 28.7 in
- BLADE: Maximum Tilt - LGP
- 17.2 in
- BLADE: Blade Width - LGP
- 124 in
- Ground Clearance - LGP
- 13 in
- BLADE: Blade Width at Maximum Angle - LGP
- 113.1 in
- BLADE: Digging Depth - LGP
- 23 in
- Track Gauge - LGP
- 67.9 in
- Ground Clearance - LGP, 762 mm (30 in)
- 13 in
- BLADE: Blade Height - LGP
- 33.8 in
- Overall Length - With Blade - LGP, 762 mm (30 in)
- 167.8 in
- Track Gauge - LGP, 762 mm (30 in)
- 73 in
- BLADE: Blade Cutting Edge Angle, Adjustable - LGP
- 52° to 58°
- BLADE: Maximum Angle (either side) - LGP
- 25°
- Overall Length - With Blade - LGP
- 167.8 in
- BLADE: Blade Width at Maximum Angle - Standard
- 95.2 in
- BLADE: Digging Depth - Standard
- 23.2 in
- BLADE: Blade Width - Standard
- 104.2 in
- BLADE: Blade Lift Height - Standard
- 28.7 in
- Ground Clearance - Standard
- 13 in
- BLADE: Blade Cutting Edge Angle, Adjustable - Standard
- 52° to 58°
- BLADE: Maximum Angle (either side) - Standard
- 25°
- BLADE: Maximum Tilt - Standard
- 14.5 in
- BLADE: Blade Capacity (SAE) - Standard
- 1.99 yd³
- Note
- *Abrasion Undercarriage
- Track Gauge - Standard
- 58.9 in
- BLADE: Blade Height - Standard
- 35.8 in
- Overall Length - With Blade - Standard
- 168 in
- Note
- With Ripper Attachment (add to Length of Basic Dozer) - 1,177 mm (46.3 in)
- Length of Basic Dozer (without blade) - LGP, 762 mm (30 in)
- 129.6 in
- Width of Dozer (standard shoes, no blade) - Standard
- 74.8 in
- Length of Basic Dozer (without blade) - Standard
- 129.6 in
- Length of Basic Dozer (without blade) - LGP
- 129.6 in
- Width of Dozer (standard shoes, no blade) - LGP, 762 mm (30 in)
- 94.9 in
- Dozer Height - LGP
- 108.9 in
- Width of Dozer (standard shoes, no blade) - LGP
- 92.9 in
- Dozer Height - LGP, 762 mm (30 in)
- 108.9 in
- Dozer Height - Standard
- 108.9 in
Retrieval Winch
- Weight
- 1,747 lb
- Maximum Line Pull - Full Drum
- 79 ft/min
- Drum Capacity - Recommended Cable
- 277 ft
- Maximum Line Pull - Bare Drum
- 50 ft/min
- Drum Capacity - Optional Cable
- 195 ft
- Maximum Line Speed - Full Drum
- 20,350 lb
- Control
- Hydraulic
- Maximum Line Speed - Bare Drum
- 32,150 lb
- Rope Diameter - Optional
- 0.75 in
- Winch Drive
- Hydraulic
- Rope Diameter - Recommended
- 0.63 in
- Speed
- Variable
- Drum Diameter
- 8 in
- Drum Width
- 9.65 in
- Throat Clearance
- 5.6 in
- Winch Length
- 35.63 in
- Overall width
- 27.91 in
High Performance Winch
- Weight
- 1,345 lb
- Drum diameter
- 10 in
- Winch drive
- Hydrostatic
- Winch length
- 27.76 in
- Maximum line pull – bare drum
- 40,000 lb
- Maximum line speed – full drum
- 207 ft/min
- Drum width
- 10.8 in
- Drum capacity – optional
- 256 ft
- Rope diameter – recommended
- 0.63 in
- Maximum line pull – full drum
- 25,000 lb
- Rope diameter – optional
- 0.75 in
- Speed
- Variable
- Maximum line speed – bare drum
- 131 ft/min
- Throat clearance
- 6.75 in
- Drum capacity – recommended cable
- 371 ft
- Overall width
- 29.2 in
- Control
- Hydraulic
Standard Equipment:
-
- Power Train
-
- Air cleaner with precleaner, automatic dust ejection and underhood intake
- Aluminum bar plate cooling system (radiator, power train)
- Automatic traction control
- Cat® C3.6 diesel engine
- Drive, auxiliary
- Dual path, closed loop, hydrostatic transmission
- Electric fuel pump
- Fuel/water separator
- Turbocharged aftercooled
-
- Electrical
-
- Alarm, backup
- Alternator, 150 amp, heavy duty
- Batteries, heavy duty, maintenance free, 1,000 CCA
- Diagnostic connector
- Four integrated front halogen lights, two rear halogen
- Horn, electric
- Starter, electric, 12 V, heavy duty
-
- Undercarriage
-
- Heavy Duty Undercarriage
- Carrier rollers
- Guards, front/rear guiding
- Six roller track frame
- Track adjusters, hydraulic
- Track rollers, lifetime lubricated
-
- Hydraulic
-
- Hydraulic pump and oil
- Single lever, three function control
- Three valve hydraulics
-
- Cat Technology
-
- Third party 3D grade system compatible
- Slope Indicate
- Stable Blade - Basic Lift
-
- Attachments
-
- Rigid drawbar
- Front pull device
-
- Operator Environment
-
- Armrests, adjustable
- Coat hook
- Controls, seat mounted, fore/aft adjustment
- Cup holders
- Eco Mode
- Electronic Monitoring system with gauge:
– Chassis slope indication
– Diesel exhaust fluid (DEF)
– Engine coolant temperature
– Fuel level
– Hydraulic oil temperature - Electronic security system
- Engine air cleaner service indicator
- Engine RPM and gear display
- Floor mat, rubber, heavy duty
- Foot pads, dash
- Hour meter, electronic
- Independent forward/reverse speed settings
- Mirror, rearview, inside
- Power port, 12 volt
- ROPS/FOPS canopy
- Seat, air suspended, cloth or vinyl
- Seatbelt, hi-vis retractable 76 mm (3")
- Seatbelt buckling indicator/reminder
- Single pedal combining decel and brake functions
- Speed recall
- Storage compartment
- Throttle switch, rotary
- Travel speed limiter, electronic
Optional Equipment:
-
- Power Train
-
- Air cleaner with external precleaner
- Installation, winch
-
- Electrical
-
- Four integrated front LED lights, two rear LED
-
- Undercarriage
-
- Abrasion undercarriage (38 section)
- Track Pairs:
– Track, 406 mm (16 in)
– Track, 635 mm (25 in)
– Track, 762 mm (30 in)
-
- Hydraulic
-
- Four valve for use with ripper
- Four valve for use with winch
-
- Cat Technology
-
- Assist with Attachment Ready Option (ARO) includes:
– Slope Indicate
– Blade Load Monitor
– Stable Blade Lift and Tilt
– Slope Assist
– Traction Control
– Steer Assist
– AutoCarry - Grade 3D with Assist includes:
– Same Assist with ARO features
– Steer Assist 3D
– Grade 3D - Cat Product Link™ PLE643/PLE743 Cellular
- Cat Product Link PLE683/PLE783 Cellular/Satellite
- Full-color 254 mm (10 in) touchscreen grade display
- Cat Command Console (availability varies by region)
- Cat Command Station (availability varies by region)
- Assist with Attachment Ready Option (ARO) includes:
-
- Attachments
-
- Drawbar, towing
- Machine security system
- Mounting, winch
- Ripper, parallelogram, includes three
- shanks and teeth
- Winch, hydraulic, high performance
- Winch, hydraulic, retrieval
-
- Operator Environment
-
- Power Pitch
- Cab, with air conditioning
- Cab, polycarbonate windows and air conditioning
- Radio, AM/FM Bluetooth®
- Seat, air suspension, choice of:
– Vinyl, heated seat with heated controls
– Cloth, heated seat with heated controls
– Cloth, heated and ventilated seat with heated controls - Sound suppression
-
- Other
-
- Heater, engine, coolant 120 V/240 V
- Starting aid, ether
Specifications
Engine
- Engine Model
- Cat C3.6
- Power - Net
- 80 hp
- Displacement
- 220 in³
- Net Power - 2,200 rpm - SAE J1349
- 80 hp
- Net Power - 2,200 rpm - ISO 9249/EEC 80/1269
- 80 hp
- Power Train
- Hydrostatic
- Note (1)
- Net power is tested per ISO 9,249:2,007 and SAE J1,349:2,011 and as advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator.
- Note (2)
- All non-road U.S. EPA Tier 4 Final, EU Stage V, Japan 2,014 (Tier 4 Final) and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less.
Weights
- Operating Weight
- 17,855 lb
- Operating Weight - LGP
- 18,839 lb
- Note (1)
- Specifications shown are for machine equipped with dozer blade, EROPS cab, back-up alarm, operator, coolant, lubricants and full fuel tank.
- Operating Weight - LGP, 762 mm/30 in
- 19,295 lb
- Note (2)
- For machine with ripper, add 554 kg (1,222 lb).
Transmission
- Drive Pumps
- 1
- Maximum Travel Speed - Reverse
- 6.2 mile/h
- Relief Valve Settings
- 7,033 psi
- Maximum Travel Speed - Forward
- 5.6 mile/h
- Track Motors
- 2
Hydraulic Controls
- Pump Output
- 17.2 gal/min
- Relief Valve Settings
- 2,988 psi
Ripper
- Type
- Parallelogram
- Number of Shanks
- 3
- Height
- 6.5 in
- Weight
- 1,222 lb
- Maximum Ground Clearance Under Tip
- 17.6 in
- Maximum Digging Depth
- 13.3 in
- Overall Width
- 67.3 in
- Maximum Reach - Ground Line
- 30.2 in
Cab
- FOPS
- ISO 3,449:2,005 Level II
- ROPS
- ISO 3,471:2,008
Undercarriage
- Length - Track on Ground - LGP, 762 mm (30 in)
- 89 in
- Length - Track on Ground - LGP
- 89 in
- Track Gauge - LGP
- 68 in
- Shoe Width - LGP, 762 mm (30 in)
- 30 in
- Track Gauge - LGP, 762 mm (30 in)
- 73 in
- Shoe Width - LGP
- 25 in
- Track Gauge
- 59 in
- Shoe Width - Standard
- 16 in
- Ground Pressure - LGP
- 4.3 psi
- Ground Pressure - LGP, 762 mm (30 in)
- 3.7 psi
- Number of Shoes - Each Side - Sealed and Lubricated Track (SALT) Undercarriage
- 43
- Number of Rollers - Each Side
- 6
- Length of Track on Ground
- 89 in
- Number of Shoes - Each Side - Abrasion Undercarriage
- 38
- Ground Pressure
- 6.45 psi
Service Refill Capacities
- Final Drive - Each - LGP
- 2.6 gal (US)
- Cooling System
- 4.2 gal (US)
- Diesel Exhaust Fluid (DEF) Tank
- 4.9 gal (US)
- Transmission - Hydraulic Tank
- 23.8 gal (US)
- Crankcase - With Filter
- 2.8 gal (US)
- Fuel Tank
- 51.5 gal (US)
- Final Drives - Each Side
- 2.6 gal (US)
Air Conditioning System
- Air Conditioning
- The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1,430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.
Dimensions
- BLADE: Blade Capacity (SAE) - LGP
- 2.17 yd³
- BLADE: Blade Lift Height - LGP
- 28.7 in
- BLADE: Maximum Tilt - LGP
- 17.2 in
- BLADE: Blade Width - LGP
- 124 in
- Ground Clearance - LGP
- 13 in
- BLADE: Blade Width at Maximum Angle - LGP
- 113.1 in
- BLADE: Digging Depth - LGP
- 23 in
- Track Gauge - LGP
- 67.9 in
- Ground Clearance - LGP, 762 mm (30 in)
- 13 in
- BLADE: Blade Height - LGP
- 33.8 in
- Overall Length - With Blade - LGP, 762 mm (30 in)
- 167.8 in
- Track Gauge - LGP, 762 mm (30 in)
- 73 in
- BLADE: Blade Cutting Edge Angle, Adjustable - LGP
- 52° to 58°
- BLADE: Maximum Angle (either side) - LGP
- 25°
- Overall Length - With Blade - LGP
- 167.8 in
- BLADE: Blade Width at Maximum Angle - Standard
- 95.2 in
- BLADE: Digging Depth - Standard
- 23.2 in
- BLADE: Blade Width - Standard
- 104.2 in
- BLADE: Blade Lift Height - Standard
- 28.7 in
- Ground Clearance - Standard
- 13 in
- BLADE: Blade Cutting Edge Angle, Adjustable - Standard
- 52° to 58°
- BLADE: Maximum Angle (either side) - Standard
- 25°
- BLADE: Maximum Tilt - Standard
- 14.5 in
- BLADE: Blade Capacity (SAE) - Standard
- 1.99 yd³
- Note
- *Abrasion Undercarriage
- Track Gauge - Standard
- 58.9 in
- BLADE: Blade Height - Standard
- 35.8 in
- Overall Length - With Blade - Standard
- 168 in
- Note
- With Ripper Attachment (add to Length of Basic Dozer) - 1,177 mm (46.3 in)
- Length of Basic Dozer (without blade) - LGP, 762 mm (30 in)
- 129.6 in
- Width of Dozer (standard shoes, no blade) - Standard
- 74.8 in
- Length of Basic Dozer (without blade) - Standard
- 129.6 in
- Length of Basic Dozer (without blade) - LGP
- 129.6 in
- Width of Dozer (standard shoes, no blade) - LGP, 762 mm (30 in)
- 94.9 in
- Dozer Height - LGP
- 108.9 in
- Width of Dozer (standard shoes, no blade) - LGP
- 92.9 in
- Dozer Height - LGP, 762 mm (30 in)
- 108.9 in
- Dozer Height - Standard
- 108.9 in
Retrieval Winch
- Weight
- 1,747 lb
- Maximum Line Pull - Full Drum
- 79 ft/min
- Drum Capacity - Recommended Cable
- 277 ft
- Maximum Line Pull - Bare Drum
- 50 ft/min
- Drum Capacity - Optional Cable
- 195 ft
- Maximum Line Speed - Full Drum
- 20,350 lb
- Control
- Hydraulic
- Maximum Line Speed - Bare Drum
- 32,150 lb
- Rope Diameter - Optional
- 0.75 in
- Winch Drive
- Hydraulic
- Rope Diameter - Recommended
- 0.63 in
- Speed
- Variable
- Drum Diameter
- 8 in
- Drum Width
- 9.65 in
- Throat Clearance
- 5.6 in
- Winch Length
- 35.63 in
- Overall width
- 27.91 in
High Performance Winch
- Weight
- 1,345 lb
- Drum diameter
- 10 in
- Winch drive
- Hydrostatic
- Winch length
- 27.76 in
- Maximum line pull – bare drum
- 40,000 lb
- Maximum line speed – full drum
- 207 ft/min
- Drum width
- 10.8 in
- Drum capacity – optional
- 256 ft
- Rope diameter – recommended
- 0.63 in
- Maximum line pull – full drum
- 25,000 lb
- Rope diameter – optional
- 0.75 in
- Speed
- Variable
- Maximum line speed – bare drum
- 131 ft/min
- Throat clearance
- 6.75 in
- Drum capacity – recommended cable
- 371 ft
- Overall width
- 29.2 in
- Control
- Hydraulic
Standard/Optional Features
Standard Equipment:
-
- Power Train
-
- Air cleaner with precleaner, automatic dust ejection and underhood intake
- Aluminum bar plate cooling system (radiator, power train)
- Automatic traction control
- Cat® C3.6 diesel engine
- Drive, auxiliary
- Dual path, closed loop, hydrostatic transmission
- Electric fuel pump
- Fuel/water separator
- Turbocharged aftercooled
-
- Electrical
-
- Alarm, backup
- Alternator, 150 amp, heavy duty
- Batteries, heavy duty, maintenance free, 1,000 CCA
- Diagnostic connector
- Four integrated front halogen lights, two rear halogen
- Horn, electric
- Starter, electric, 12 V, heavy duty
-
- Undercarriage
-
- Heavy Duty Undercarriage
- Carrier rollers
- Guards, front/rear guiding
- Six roller track frame
- Track adjusters, hydraulic
- Track rollers, lifetime lubricated
-
- Hydraulic
-
- Hydraulic pump and oil
- Single lever, three function control
- Three valve hydraulics
-
- Cat Technology
-
- Third party 3D grade system compatible
- Slope Indicate
- Stable Blade - Basic Lift
-
- Attachments
-
- Rigid drawbar
- Front pull device
-
- Operator Environment
-
- Armrests, adjustable
- Coat hook
- Controls, seat mounted, fore/aft adjustment
- Cup holders
- Eco Mode
- Electronic Monitoring system with gauge:
– Chassis slope indication
– Diesel exhaust fluid (DEF)
– Engine coolant temperature
– Fuel level
– Hydraulic oil temperature - Electronic security system
- Engine air cleaner service indicator
- Engine RPM and gear display
- Floor mat, rubber, heavy duty
- Foot pads, dash
- Hour meter, electronic
- Independent forward/reverse speed settings
- Mirror, rearview, inside
- Power port, 12 volt
- ROPS/FOPS canopy
- Seat, air suspended, cloth or vinyl
- Seatbelt, hi-vis retractable 76 mm (3")
- Seatbelt buckling indicator/reminder
- Single pedal combining decel and brake functions
- Speed recall
- Storage compartment
- Throttle switch, rotary
- Travel speed limiter, electronic
Optional Equipment:
-
- Power Train
-
- Air cleaner with external precleaner
- Installation, winch
-
- Electrical
-
- Four integrated front LED lights, two rear LED
-
- Undercarriage
-
- Abrasion undercarriage (38 section)
- Track Pairs:
– Track, 406 mm (16 in)
– Track, 635 mm (25 in)
– Track, 762 mm (30 in)
-
- Hydraulic
-
- Four valve for use with ripper
- Four valve for use with winch
-
- Cat Technology
-
- Assist with Attachment Ready Option (ARO) includes:
– Slope Indicate
– Blade Load Monitor
– Stable Blade Lift and Tilt
– Slope Assist
– Traction Control
– Steer Assist
– AutoCarry - Grade 3D with Assist includes:
– Same Assist with ARO features
– Steer Assist 3D
– Grade 3D - Cat Product Link™ PLE643/PLE743 Cellular
- Cat Product Link PLE683/PLE783 Cellular/Satellite
- Full-color 254 mm (10 in) touchscreen grade display
- Cat Command Console (availability varies by region)
- Cat Command Station (availability varies by region)
- Assist with Attachment Ready Option (ARO) includes:
-
- Attachments
-
- Drawbar, towing
- Machine security system
- Mounting, winch
- Ripper, parallelogram, includes three
- shanks and teeth
- Winch, hydraulic, high performance
- Winch, hydraulic, retrieval
-
- Operator Environment
-
- Power Pitch
- Cab, with air conditioning
- Cab, polycarbonate windows and air conditioning
- Radio, AM/FM Bluetooth®
- Seat, air suspension, choice of:
– Vinyl, heated seat with heated controls
– Cloth, heated seat with heated controls
– Cloth, heated and ventilated seat with heated controls - Sound suppression
-
- Other
-
- Heater, engine, coolant 120 V/240 V
- Starting aid, ether