fbpx

Cat 908 Compact Wheel Loader

Cat® wheel loaders set the standard for productivity, fuel efficiency and operator comfort. The Cat 908 Compact Wheel Loader has a high torque C2.8 engine that works in conjunction with an intelligent hystat power train to deliver exceptional fuel efficiency. “Shift on the go” locking differentials and hydrostatic transmission provide smooth and powerful operation while increasing the efficiency of machine cycles.

Maximum Gross Power
74.7 HP
Operating Weight
14617 lb
Bucket Capacities
0.75-1.55 m³ (1.0-2.0 yd³)
Recyclability
93%

Engine

Maximum Gross Power
74.7HP
Engine Model
Cat C2.8*
Maximum Engine Speed
2550 rpm
Maximum Gross Power - Rated Engine Speed
2400r/min
Maximum Gross Power - SAE J1995
74.7HP
Maximum Gross Power - ISO 14396
74.3HP
Maximum Gross Power - ISO 14396 (metric)
75.3mhp
Rated Net Power - Rated Engine Speed
2400r/min
Rated Net Power - SAE J1349
72.7HP
Rated Net Power - ISO 9249
72.1HP
Rated Net Power - 2,400 rpm - ISO 9249 (metric)
73.1mhp
Maximum Gross Torque - SAE J1995
222lb/ft
Maximum Gross Torque - ISO 14396
221lb/ft
Maximum Net Torque - SAE J1349
218lb/ft
Maximum Net Torque - ISO 9249
217lb/ft
Displacement
171in³
Bore
3.54in
Stroke
4.33in
Note
Advertised power is tested per the specified standard in effect at the time of manufacture
Note (1)
Net power advertised is the power available at the flywheel.
Note (2)
*Two Cat C2.8 engine emission options are available: 1) Meets U.S. EPA Tier 4 Final, EU Stage V. 2) U.S. EPA Tier 3 and EU Stage IIIA equivalent. Tier 3 engine specs are 0.3 kW/0.4 hp more gross power (SAE J1995), 0.2 kW/0.3 hp on net power (SAE J1349)
Note (3)
#Maximum gross and net torque measured at 1,600 rpm.

Weights

Operating Weight
14617lb

Buckets

Bucket Capacities
0.75-1.55 m³ (1.0-2.0 yd³)
Bucket Capacities - General Purpose
0.80-1.35 m³ (1.0-1.7 yd³)
Multi-Purpose
0.75-1.1 m³ (1.0-1.4 yd³)
Bucket Capacities - Light Material
1.25-1.55 m³ (1.6-2.0 yd³)
Note
Bucket selection must be made with an understanding of the material density and application to ensure machine stability is maintained within the tipping loads stated per model and configuration.
Note (1)
Bucket capacities stated include BOCE, in line with ISO 7546.

Sustainability

Recyclability
93%

Dimensions - With SSL Coupler - Approximate

Height - Ground to Cab
8.75ft
Height: Ground to Beacon**
9.33ft
Height: Ground Axle Center**
1.67ft
Height - Ground Clearance
1ft
Length - Overall with Bucket
18.67ft
Length: Rear Axle to Bumper
4.5ft
Length: Hitch to Front Axle
3.5ft
Length - Wheel Base
7.08ft
Clearance - Bucket at 45°
8.25ft
Clearance: Load over Height**
9.75ft
Clearance - Level Bucket
10.5ft
Height - Bucket Pin
11.17ft
Height: Overall**
14.42ft
Reach - Bucket at 45°
2.67ft
Carry Height: Bucket Pin
1.25ft
Dig Depth
0.45ft
Width - Bucket
6.75ft
Width - Tread Center
5.08ft
Turning Radius - Over Bucket
15.08ft
Width - Over Tires
6.67ft
Turning Radius: Outside of Tires
13.17ft
Turning Radius - Inside Tire
6.67ft
Rack Angle at Full Lift
50°
Dump Angle at Full Lift
48°
Rack Angle at Carry
54°
Departure Angle - Degrees
30°
Articulation Angle - Degrees
39°
Operating Weight: Bucket ^
14752lb
Tipping Load – Straight – ISO 14397-1 †
9581lb
Tipping Load – Full Turn – ISO 14397-1 †
8141lb
Operating Weight: Carriage and Tines ^^
14391lb
Tipping Load - Straight †
9753lb
80% of Tip: Firm and Level EN474-3 ††
5438lb
Note (1)
*Vary with bucket
Note (2)
**Vary with tire
Note (3)
^Horizontal Pin Lock Coupler (HPL-V) or Vertical Pin Coupler (SSL), 1.15 m3 (1.5 yd3) general purpose bucket.
Note (4)
^^Horizontal Pin Lock Coupler (HPL-V) or Vertical Pin Coupler (SSL), class III carriage, 1220 mm (4 ft) tines (500 mm [20 in] load center).
Note (5)
†Full compliance to ISO 14397-1 (2007) Sections 1 thru 6 (fork 500 mm [20 in] load center), which requires 2% verification between calculation and testing.
Note (6)
††Full compliance to EN474-3 and SAE J1197.
Note (7)
#HPL-A weight, tipping and rated loads are within 1% of the HPL-V.
Note (8)
Dimensions listed are for a machine configured with standard cab, heater, 20 km/h (12 mph), standard guarding, 80 kg (176 lb) operator, full fluids, SPT9 405/70 R20 tires and 1.15 m3 (1.5 yd3) general purpose bucket with bolt-on cutting edge or a class II
Note (9)
Note: Goodyear POWERLOAD® tires can add up to approximately 140 kg (305 lb) to the full turn tip load and reduce vertical height by approximately 25 mm (1 in) compared to SPT9
Tipping Load - Full Turn - ISO 14397-1†
6800lb
Length: Front Axle to Front of Coupler
4.75ft

Dimensions - High Lift - With HPL-V Coupler - Approximate#

Height: Ground to Cab**
8.75ft
Height: Ground to Beacon**
9.33ft
Height: Ground Axle Center**
1.67ft
Height: Ground Clearance**
1ft
Length: Overall*
19.67ft
Length: Rear Axle to Bumper
4.5ft
Length: Hitch to Front Axle
3.5ft
Length: Wheel Base
7.08ft
Clearance: Bucket at 45° *
10.92ft
Clearance: Load over Height**
10.75ft
Clearance: Level Bucket**
12.08ft
Height: Bucket Pin**
12.75ft
Height: Overall**
15.67ft
Reach: Bucket at 45° *
3.25ft
Carry Height: Bucket Pin
1.17ft
Dig Depth**
0.33ft
Width: Bucket
6.75ft
Width: Tread Center
5.08ft
Turning Radius: Over Bucket
15.83ft
Width: Over Tires
6.67ft
Turning Radius: Outside of Tires
13.17ft
Turning Radius: Inside of Tires
6.5ft
Rack Angle at Full Lift
69°
Dump Angle at Full Lift
40°
Rack Angle at Carry
48°
Departure Angle - Degrees
30°
Articulation Angle - Degrees
39°
Operating Weight: Bucket ^
14848lb
Tipping Load - Straight - ISO 14397-1 †
9187lb
Tipping Load - Full Turn - ISO 14397-1 †
7645lb
Operating Weight: Carriage and Tines ^^
14542lb
Tipping Load - Straight †
9187lb
80% of Tip: Firm and Level EN474-3 ††
4706lb
Note (1)
*Vary with bucket
Note (2)
**Vary with tire
Note (3)
^Horizontal Pin Lock Coupler (HPL-V) or Vertical Pin Coupler (SSL), 1.15 m3 (1.5 yd3) general purpose bucket.
Note (4)
^^Horizontal Pin Lock Coupler (HPL-V) or Vertical Pin Coupler (SSL), class III carriage, 1220 mm (4 ft) tines (500 mm [20 in] load center).
Note (5)
†Full compliance to ISO 14397-1 (2007) Sections 1 thru 6 (fork 500 mm [20 in] load center), which requires 2% verification between calculation and testing.
Note (6)
††Full compliance to EN474-3 and SAE J1197.
Note (7)
#HPL-A weight, tipping and rated loads are within 1% of the HPL-V.
Note (8)
Dimensions listed are for a machine configured with standard cab, heater, 20 km/h (12 mph), standard guarding, 80 kg (176 lb) operator, full fluids, SPT9 405/70 R20 tires and 1.15 m3 (1.5 yd3) general purpose bucket with bolt-on cutting edge or a class II
Note (9)
Note: Goodyear POWERLOAD® tires can add up to approximately 140 kg (305 lb) to the full turn tip load and reduce vertical height by approximately 25 mm (1 in) compared to SPT9

Dimensions - High Lift - With SSL Coupler - Approximate

Height: Ground to Cab**
8.75ft
Height: Ground to Beacon**
9.33ft
Height: Ground Axle Center**
1.67ft
Height: Ground Clearance**
1ft
Length: Overall*
20.17ft
Length: Rear Axle to Bumper
4.5ft
Length: Hitch to Front Axle
3.5ft
Length: Wheel Base
7.08ft
Clearance: Bucket at 45° *
10.42ft
Clearance: Load over Height**
10.75ft
Clearance: Level Bucket**
12.08ft
Height: Bucket Pin**
12.75ft
Height: Overall**
15.92ft
Reach: Bucket at 45° *
3.42ft
Carry Height: Bucket Pin
1.25ft
Dig Depth**
0.42ft
Width: Bucket
6.75ft
Width: Tread Center
5.08ft
Turning Radius: Over Bucket
16.17ft
Width: Over Tires
6.67ft
Turning Radius: Outside of Tires
13.17ft
Turning Radius: Inside of Tires
6.5ft
Rack Angle at Full Lift
66°
Dump Angle at Full Lift
40°
Rack Angle at Carry
42°
Departure Angle - Degrees
30°
Articulation Angle - Degrees
39°
Operating Weight: Bucket ^
15070lb
Tipping Load - Straight - ISO 14397-1 †
8385lb
Tipping Load - Full Turn - ISO 14397-1 †
6943lb
Operating Weight: Carriage and Tines ^^
14714lb
Tipping Load - Straight †
8385lb
80% of Tip: Firm and Level EN474-3 ††
4375lb
Note (1)
*Vary with bucket
Note (2)
**Vary with tire
Note (3)
^Horizontal Pin Lock Coupler (HPL-V) or Vertical Pin Coupler (SSL), 1.15 m3 (1.5 yd3) general purpose bucket.
Note (4)
^^Horizontal Pin Lock Coupler (HPL-V) or Vertical Pin Coupler (SSL), class III carriage, 1220 mm (4 ft) tines (500 mm [20 in] load center).
Note (5)
†Full compliance to ISO 14397-1 (2007) Sections 1 thru 6 (fork 500 mm [20 in] load center), which requires 2% verification between calculation and testing.
Note (6)
††Full compliance to EN474-3 and SAE J1197.
Note (7)
#HPL-A weight, tipping and rated loads are within 1% of the HPL-V.
Note (8)
Dimensions listed are for a machine configured with standard cab, heater, 20 km/h (12 mph), standard guarding, 80 kg (176 lb) operator, full fluids, SPT9 405/70 R20 tires and 1.15 m3 (1.5 yd3) general purpose bucket with bolt-on cutting edge or a class II
Note (9)
Note: Goodyear POWERLOAD® tires can add up to approximately 140 kg (305 lb) to the full turn tip load and reduce vertical height by approximately 25 mm (1 in) compared to SPT9

Service Refill Capacities

Fuel Tank
24Gal
Cooling System
3.2Gal
Engine Crankcase
2.3Gal
Axles - Front Center Differential
2.3Gal
Axles - Rear Center Differential
2.3Gal
Hydraulic System - Including Tank
18.6Gal
Hydraulic Tank
11.8Gal
Transmission
0.6Gal
Note
No Diesel Exhaust Fluid (DEF) fluid needed on this size engine.

Axles

Front
Fixed (standard), Locking Differential (optional)
Rear
Fixed (standard), Locking Differential (optional)
Note
Oscillation of ±11 degrees via hitch between front and rear frames.

Steering

Steering Articulation Angle - Each Direction
39°
Maximum Flow - Steering Pump
12.3gal/min
Maximum Working Pressure - Steering Pump
3336psi
Steering Cycle Times – (full left to full right) – at High Idle
2.8s
Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left
3.25 turns or 4.00 turns

Transmission

Forward and Reverse - Speed Range Creep#
6mile/h
Forward and Reverse - Speed Range 1*
6mile/h
Forward and Reverse - Speed Range 2** - High Speed
10.5mile/h
Forward and Reverse - Speed Range 2** - Standard
12mile/h
Forward and Reverse - Speed Range 3***
25mile/h
Note
#Factory default shown, can be adjusted to any speed up to 19 km/h (12 mph).
Note (1)
*Creep function not available in this gear or above.
Note (2)
**Max speed dependent on model and configuration (standard vs. high speed transmission).
Note (3)
***Reverse is 30 km/h (19 mph).

Tires

Tire Size - Standard
*405/70 R20 SPT9
Tire Size - Optional
405/70 R20 Powerloads
Tire Size - Optional (1)
400/70 R20 XMCL/Bibload
Tire Size - Optional (2)
360/80 R20 TRI 2
Tire Size - Optional (3)
40X14-20 TL, SM/TR
Note
*This tire has been used for all dimension, stability and performance data.
Note (1)
Other tire choices are available. Contact your Cat dealer for details.
Note (2)
Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.

Cab

ROPS
ISO 3471:2008
FOPS
ISO 3449:2005 Level II
Note (1)
Canopy and cab, Rollover Protective Structures (ROPS) are available worldwide. Canopy not available in EU.

Loader Hydraulic System

Main Relief - 1st Auxiliary (3rd slice)
3408psi
Main Relief - 1st Auxiliary (3rd slice) - Standard Flow*
24gal/min
Main Relief - 1st Auxiliary (3rd slice) - High Flow*
33gal/min
Main Relief - 2nd Auxiliary (4th slice)
3408psi
Main Relief - 2nd Auxiliary (4th slice) - Flow
12gal/min
Hydraulic Cycle Time - Rackback
2.5s
Hydraulic Cycle Time - Lift
5.8s
Hydraulic Cycle Time - Dump
1.8s
Hydraulic Cycle Time - Float Down
3.6s
Note
* Maximum flow stated, actual flow delta could be 6% from data shown. Also adjustable from 20% to 100% of maximum flow through display.

Dimensions - With HPL-V Coupler - Approximate#

Height: Ground to Cab**
8.75ft
Height: Ground to Beacon**
9.33ft
Height: Ground Axle Center**
1.67ft
Height: Ground Clearance**
1ft
Length: Overall*
18.17ft
Length: Rear Axle to Bumper
4.5ft
Length: Hitch to Front Axle
3.5ft
Length: Wheel Base
7.08ft
Clearance: Bucket at 45° *
8.58ft
Clearance: Load over Height**
9.75ft
Clearance: Level Bucket**
10.5ft
Height: Bucket Pin**
11.17ft
Height: Overall**
14.17ft
Reach: Bucket at 45° *
2.33ft
Carry Height: Bucket Pin
1.17ft
Dig Depth**
0.33ft
Width: Bucket
6.75ft
Width: Tread Center
5.08ft
Turning Radius: Over Bucket
14.75ft
Width: Over Tires
6.67ft
Turning Radius: Outside of Tires
13.17ft
Turning Radius: Inside of Tires
6.5ft
Rack Angle at Full Lift
53°
Dump Angle at Full Lift
45°
Rack Angle at Carry
51°
Departure Angle - Degrees
30°
Articulation Angle - Degrees
39°
Operating Weight: Bucket ^
14633lb
Tipping Load - Straight - ISO 14397-1 †
10626lb
Tipping Load - Full Turn - ISO 14397-1 †
8895lb
Operating Weight: Carriage and Tines ^^
14252lb
Tipping Load - Straight †
10626lb
80% of Tip: Firm and Level EN474-3 ††
5815lb
Note (1)
*Vary with bucket
Note (2)
**Vary with tire
Note (3)
^Horizontal Pin Lock Coupler (HPL-V) or Vertical Pin Coupler (SSL), 1.15 m3 (1.5 yd3) general purpose bucket.
Note (4)
^^Horizontal Pin Lock Coupler (HPL-V) or Vertical Pin Coupler (SSL), class III carriage, 1220 mm (4 ft) tines (500 mm [20 in] load center).
Note (5)
†Full compliance to ISO 14397-1 (2007) Sections 1 thru 6 (fork 500 mm [20 in] load center), which requires 2% verification between calculation and testing.
Note (6)
††Full compliance to EN474-3 and SAE J1197.
Note (7)
#HPL-A weight, tipping and rated loads are within 1% of the HPL-V.
Note (8)
Dimensions listed are for a machine configured with standard cab, heater, 20 km/h (12 mph), standard guarding, 80 kg (176 lb) operator, full fluids, SPT9 405/70 R20 tires and 1.15 m3 (1.5 yd3) general purpose bucket with bolt-on cutting edge or a class II
Note (9)
Note: Goodyear POWERLOAD® tires can add up to approximately 140 kg (305 lb) to the full turn tip load and reduce vertical height by approximately 25 mm (1 in) compared to SPT9
Length: Front Axle to Front of Coupler
3.92ft

Standard Equipment:

  • Power Train
    • Emissions compliant, two options (Dependent on regional regulations.)
      – U.S. EPA Tier 4 Final and EU Stage V
      – U.S. EPA Tier 3 and EU Stage IIIA equivalent
    • Cat C2.8 engine
      – Diesel particulate filter (Fit for Life) or muffler (Dependent on regional regulations.)
      – Fuel, diesel, ultra low or low Sulphur (Dependent on regional regulations.)
      – Hydrostatic transmission, two speed, with inching function, “shift on the go”
      – Power train mode, hystat
    • Air cleaner, two stage filter, with in cab audio/visual indicator on display
    • Axles, heavy duty, frame mounted with outboard planetary reduction
    • Closed circuit breather
    • Coolant, extended life, –36° C (–33° F)
    • Drive shaft, sealed for life, universal joints
    • Engine, auto idle shutdown, hibernation mode
    • Engine oil, ECO drain tap and hose
    • Fuel pump, priming (manual)/water separator/drain
  • Hydraulics
    • Hydraulic pilot shut off switch, in cab
    • Electro-hydraulic, fully proportional controls
    • Dead engine lower, lift valve, manual
    • Demand cooling fan, hydraulically drive
    • Coupler/pin on attachment ready
    • Caterpillar HYDO Advanced 10 hydraulic oil
    • Hystat displacement pump, infinitely variable
    • Implement valve, pressure compensated
    • Joystick, single lever, single auxiliary roller
    • Multi-function lift and tilt with loader arm float
    • Motor, single drive with dedicated implement and steering pumps
  • Electrical
    • Alternator, 100 amp sealed
    • Battery, heavy duty, 12V, 90Ah and 1,000 CCA
    • Battery disconnect switch
    • Cab mounted fuse panel
    • Lights, rear stop and turn, LED
    • Lights, roading, front halogen
    • Service (Electronic Technician)
    • Product Link
  • Operator Environment
    • ROPS/FOPS certified canopy/cab
      – 12V power outlets, interior/exterior
      – Pedals, raised, foot, brake/inching, accelerator
      – Lever, parking brake
      – Cup holders (2)
      – CB radio clip, phone holder
      – Door release, internal (left and right)
      – Hook, large, coat and hard hat
      – Floormat, heavy duty, easy clean
      – Mirrors, (2) external breakaway, (1) internal
      – Operator station on isolation mounts
      – Steering wheel, spinner knob, horn in center
      – Seat belt, orange, retractable, 51 mm (2 in)
      – Storage, personal (trays [3], seat pocket)
      – Steering column, tilt adjusted
      – Column mounted multi function control: lights, roading, wipers, self cancelling turn signals
      – Quick coupler switch, in cab
    • Display, analog and digital
      – Gauges (2), hydraulic oil, engine coolant
      – Digital with soft touch buttons – fuel level, speed range, speedometer, service hour meter, service/maintenance information, hydraulic and power train performance and aggressiveness settings, security passcode (multiple languages)
    • Joystick, seat mounted, standard multifunction
      – FNR, auxiliary roller, speed range select, continuous flow, differential lock, horn
      – Arm rest, padded right, multiple position vertical height
    • Seat, manual height adjustment, (cab) fabric with adjustable left arm rest, (canopy) vinyl
    • Cab
      – Doors (2), fixed glass
      – Wipers, front and rear, full front coverage
      – Windshield, front single piece
      – Window, rear heated
      – Radio ready, speakers and wiring
      – Air vents, (4) screen, (7) directional
      – Heating, mechanical control unit
      – Sun visor, solid, front full width
      – Interior light (incandescent)
  • Other
    • Fenders, front and rear
    • Ground level easy access daily service points
    • Loader arm safety brace
    • Lockable main and side engine enclosures
    • Lockable, fuel cap, HVAC filters, nose cone
    • Machine lifting/tie down points
    • Paint, Electro-Coat primer, gloss topcoat
    • Recovery hitch with pin
    • Scheduled Oil Sampling (S·O·S℠) ports, engine oil and hydraulic oil

Optional Equipment:

  • Power Train
    • Antifreeze, extended life coolant, –50° C (–58° F)
    • Cold start – jacket water heater, bypass valve
    • Creep and throttle lock function
    • Fuel pump, priming, electric (Dependent on regional regulations.)
    • 40 km/h (25 mph) hydrostatic transmission, 3-speed, “shift on the go”, secondary steering and boosted brakes
    • Power train mode, utility (includes keypad)
  • Electrical
    • Lighting packages, multiple; front, rear, engine bay (LED or HAL)
    • Push to start
    • Work tool wiring harness, (3) in cab switches
  • Hydraulics
    • Auxiliary flow, single standard (3) valve, single high flow (3) valve, dual high flow (4) valve
    • Caterpillar Bio HYDO Advanced hydraulic oil
    • Connect under pressure and case drain
    • Ride Control or load check valves*
    • Reversing fan
    • Quick disconnect auxiliary hydraulics
  • Operator Station
    • Air Conditioning, automatic temperature control (ATC)
    • Doors, sliding windows (left and right)
    • Interior light, door activated
    • Joystick, FNR, twin auxiliary roller, differential lock, horn
    • Joystick, seat mounted, multifunction
    • Mirrors (2) electronically adjustable, heated external, plus lower parabolic mirror
    • Phone holder, spring loaded
    • Radio, FM or digital audio broadcast
    • Seat belt options, multiple
    • Seat packages; deluxe or premium
    • Secondary display, front or rear view camera
    • Soft touch keypad options, 8 or 16 button
    • Storage, lockable box or lockable cooled box
    • Sun visor, rear perforated
    • USB ports (2), interior
  • Other
    • Couplers, vertical (SSL), horizontal (HPL-V, HPL-A)
    • Rotary sensors (snubbing, kickouts, parallel)
    • High lift option

PR121 Manual Angle Power Box Rake

Roller Width
84 in
Overall Width
93 in
Maximum Angle - Right or Left
20 degrees

PR123 Hydraulic Angle Power Box Rake

Roller Width
90 in
Overall Width
99 in
Maximum Angle - Right or Left
20 degrees

PR118 Manual Angle Power Box Rake

Roller Width
72 in
Overall Width
81 in
Maximum Angle - Right or Left
20 degrees

PR121 Hydraulic Angle Power Box Rake

Roller Width
84 in
Overall Width
93 in
Maximum Angle - Right or Left
20 degrees

PR118 Hydraulic Angle Power Box Rake

Roller Width
72 in
Overall Width
81 in
Maximum Angle - Right or Left
20 degrees

LR119 Landscape Rake

Working Width
74.1 in
Bucket Capacity - Struck
0.4 yd³
Weight
1439.6 lb

LR116 Landscape Rake

Working Width
62 in
Bucket Capacity - Struck
0.4 yd³
Weight
1311.7 lb

Manual Nursery Fork with Fixed Adjustments

Overall Length
98.1 in
Overall Width
52.2 in
Weight
754 lb

Hydraulic Nursery Fork with Variable Adjustments

Overall Length
98.1 in
Overall Width
52.2 in
Weight
798 lb

1148 mm (45 in) Tree Scoop Bucket

Length
38.7 in
Height
23.4 in
Overall Width
45.2 in

1312 mm (52 in) Pallet Fork Carriage

Height
20.4 in
Width
51.7 in
Weight
269 lb

1312 mm (52 in) Pallet Fork Carriage

Height
19.4 in
Width
51.7 in
Weight
180.8 lb

1438 mm (57 in) Heavy Duty Fork Carriage

Height
35.8 in
Width
56.6 in
Weight
319.7 lb

PC310 High Flow XPS Cold Planer

Working Width
39.4 in
Maximum Cutting Depth
5.1 in
Required Hydraulics
High Flow XPS

PC305 High Flow Cold Planer

Working Width
17.7 in
Maximum Cutting Depth
6.7 in
Required Hydraulics
High Flow

PC306 High Flow Cold Planer

Working Width
23.6 in
Maximum Cutting Depth
6.7 in
Required Hydraulics
High Flow

PC306 With Water High Flow Cold Planer

Working Width
23.6 in
Maximum Cutting Depth
6.7 in
Required Hydraulics
High Flow

PC104 Standard Flow Cold Planer

Working Width
13.8 in
Maximum Cutting Depth
5.9 in
Required Hydraulics
Standard Flow

PC105 Standard Flow Cold Planer

Working Width
17.7 in
Maximum Cutting Depth
5.9 in
Required Hydraulics
Standard Flow

BD118 Side Discharge Bucket With Sawdust Agitator

Capacity
2 yd³
Width
73.2 in
Required Hydraulics
Standard Flow

BD121 Side Discharge Bucket With Sawdust Agitator

Capacity
2.3 yd³
Width
85.2 in
Required Hydraulics
Standard Flow

BD121 Side Discharge Bucket With Sand Agitator

Capacity
1.3 yd³
Width
85.2 in
Required Hydraulics
Standard Flow

BD118 Side Discharge Bucket With Sand Agitator

Capacity
1 yd³
Width
73.2 in
Required Hydraulics
Standard Flow

MB250 Mixing Bucket

Capacity
0.33 yd³
Width
54.7 in
Required Hydraulics
Standard Flow

MB200 Mixing Bucket

Capacity
0.26 yd³
Width
54.6 in
Required Hydraulics
Standard Flow

0.9 m3 (1.2 yd3) ISO Coupler Multi-Purpose Bucket

Width
81.1 in
Weight
1397.7 lb
Height
36.7 in

0.9 m3 (1.2 yd3) Skid Steer Coupler Multi-Purpose Bucket With Bolt-On Cutting Edge

Width
81.9 in
Weight
1283.1 lb
Height
37.4 in

0.9 m3 (1.2 yd3) Skid Steer Coupler Multi-Purpose Bucket With Bolt-On Teeth

Width
81.9 in
Weight
1230 lb
Height
36.7 in

0.9 m3 (1.2 yd3) ISO Coupler Multi-Purpose Bucket

Width
81.1 in
Weight
1397.7 lb
Height
37.4 in

1.6 m3 (2.0 yd3) ISO Coupler Light Material Bucket With Bolt-On Cutting Edge

Width
81.9 in
Weight
1148.6 lb
Height
39.8 in

1.3 m3 (1.7 yd3) ISO Coupler Light Material Bucket With Bolt-On Cutting Edge

Width
81.9 in
Weight
1029.6 lb
Height
38.4 in

1.6 m3 (2.0 yd3) Skid Steer Coupler Light Material Bucket With Bolt-On Cutting Edge

Width
81.9 in
Weight
1146.4 lb
Height
40 in

2080 mm (82 in) Skid Steer Coupler Industrial Grapple Bucket With Bolt-On Cutting Edge

Width
81.9 in
Weight
1295 lb
Height - Grapples Closed
41.5 in

1.3 m3 (1.7 yd3) Skid Steer Coupler Light Material Bucket With Bolt-On Cutting Edge

Width
81.9 in
Weight
1027.4 lb
Height
38.4 in

1.4 m3 (1.8 yd3) ISO Coupler General Purpose Bucket With Bolt-On Cutting Edge

Width
81.9 in
Weight
1058.2 lb
Height
38.8 in

1.4 m3 (1.8 yd3) ISO Coupler General Purpose Bucket With Bolt-On Teeth

Width
81.1 in
Weight
1000.9 lb
Height
38.2 in

1.2 m3 (1.4 yd3) ISO Coupler General Purpose Bucket With Bolt-On Cutting Edge

Width
81.9 in
Weight
996.5 lb
Height
37.6 in

1.2 m3 (1.5 yd3) ISO Coupler General Purpose Bucket With Bolt-On Teeth

Width
81.1 in
Weight
932.6 lb
Height
37 in

1.1 m3 (1.4 yd3) ISO Coupler General Purpose Bucket With Bolt-On Teeth

Width
80.2 in
Weight
873 lb
Height
36.2 in

1.2 m3 (1.5 yd3) Skid Steer Coupler General Purpose Bucket With Bolt-On Cutting Edge

Width
81.9 in
Weight
987.7 lb
Height
37.6 in

1.2 m3 (1.5 yd3) ISO Coupler General Purpose Bucket With Bolt-On Cutting Edge

Width
81.9 in
Weight
989.9 lb
Height
37.6 in

1.1 m3 (1.4 yd3) Skid Steer Coupler General Purpose Bucket With Bolt-On Cutting Edge

Width
80.5 in
Weight
917.1 lb
Height
36.8 in

1.1 m3 (1.4 yd3) Skid Steer Coupler General Purpose Bucket With Bolt-On Teeth

Width
80.2 in
Weight
870.8 lb
Height
36.2 in

1.1 m3 (1.4 yd3) Skid Steer Coupler General Purpose Bucket

Width
81.1 in
Weight
888 lb
Height
36.9 in

1.0 m3 (1.3 yd3) ISO Coupler General Purpose Bucket With Bolt-On Teeth

Width
74 in
Weight
837.8 lb
Height
36.2 in

1.0 m3 (1.3 yd3) Skid Steer Coupler General Purpose Bucket With Bolt-On Cutting Edge

Width
74.4 in
Weight
877.4 lb
Height
36.8 in

1.0 m3 (1.3 yd3) ISO Coupler General Purpose Bucket With Bolt-On Cutting Edge

Width
74.4 in
Weight
879.6 lb
Height
36.8 in

1.0 m3 (1.3 yd3) ISO Coupler General Purpose Bucket With Bolt-On Teeth

Width
74 in
Weight
831.1 lb
Height
36.2 in

0.8 m3 (1.0 yd3) Skid Steer Coupler General Purpose Bucket With Bolt-On Cutting Edge

Width
74.4 in
Weight
822.3 lb
Height
36.3 in

BRX118 Industrial Brushcutter

Overall Width
75.2 in
Cutting Width
72 in
Maximum Cutting Diameter
8 in

BU118 Utility Broom with Polypropylene Bristles

Overall Width
83.3 in
Sweeping Width
70.9 in
Brush Diameter
26.2 in

BU118 Utility Broom

Overall Width
83.3 in
Sweeping Width
73.4 in
Brush Diameter
26 in

BU115 Utility Broom with Polypropylene Bristles

Overall Width
71.3 in
Sweeping Width
59.1 in
Brush Diameter
26.2 in

BU115 Utility Broom

Overall Width
71.3 in
Sweeping Width
59.4 in
Brush Diameter
26 in

BP115C Pickup Broom

Overall Width
78.3 in
Sweeping Width
60 in
Brush Diameter
26 in

BP118C Pickup Broom

Overall Width
90.4 in
Sweeping Width
72 in
Brush Diameter
26 in

BA22 Hydraulic, 12V Angle Broom

Overall Width
94.5 in
Sweeping Width
86.6 in
Brush Diameter
27.6 in

BA118C Manual Angle Broom

Overall Width
104 in
Sweeping Width
83 in
Brush Diameter
32 in

BA118C Hydraulic Angle Broom

Overall Width
104 in
Sweeping Width
83 in
Brush Diameter
32 in

2337 mm (92 in) Dozer Blade

Blade Width
92 in
Width - Fully Angled
80.7 in
Maximum Blade Angle - Right/Left of Center
30 degrees

2007 mm (79 in) Dozer Blade

Blade Width
79 in
Width - Fully Angled
68.9 in
Maximum Blade Angle - Right/Left of Center
30 degrees

1829 mm (72 in) Angle Blade

Blade Width
72 in
Width - Fully Angled
66.3 in
Maximum Blade Angle - Right/Left of Center
30 degrees

2134 mm (84 in) Angle Blade

Blade Width
84 in
Width - Fully Angled
76.7 in
Maximum Blade Angle - Right/Left of Center
30 degrees

1140 mm (45 in) Dual Tine Bale Spear

Overall Width
55.4 in
Overall Height
51.8 in
Capacity
3007.1 lb

890 mm (35 in) Dual Tine Bale Spear

Overall Width
55.4 in
Overall Height
51.8 in
Capacity
3007.1 lb

1140 mm (45 in) Single Tine Bale Spear

Overall Width
50.6 in
Overall Height
22.4 in
Capacity
2004 lb

1803 mm (71 in) Bale Grab

Overall Width
55.2 in
Overall Height
34.4 in
Maximum Opening Width
71 in

2133 mm (84 in) Bale Grab

Overall Width
55.2 in
Overall Height
34.4 in
Maximum Opening Width
84 in

890 mm (35 in) Single Tine Bale Spear

Overall Width
50.6 in
Overall Height
22.4 in
Capacity
2004 lb

A68 Auger

Drive Shaft Torque at Maximum Pressure
5034.6 lb/ft
Drive Method
Gerotor Motor - Double Planetary Drive
Mounting Bracket Design
Skid Steer Loader Coupler

A41 Auger

Drive Shaft Torque at Maximum Pressure
3037.3 lb/ft
Drive Method
Gerotor Motor - Single Planetary Reduction
Mounting Bracket Design
Skid Steer Loader Coupler

A23 Auger

Drive Shaft Torque at Maximum Pressure
1699.3 lb/ft
Drive Method
Gerotor Motor - Direct Drive
Mounting Bracket Design
Skid Steer Loader Coupler

Skid Steer to Horizontal Pin Lock Adapter for Compact Wheel Loaders

Weight
143.3 lb
Width
12.8 in
Overall Length
44.3 in

SG16 Stump Grinder

Required Hydraulics
Standard Flow
Cutting Wheel Diameter - With Teeth
21.5 in
Cutting Depth - Below Ground
20.5 in

3.66 m (12 ft) Straight Snow Push with rubber cutting edge

Working Width
144 in
Weight
952.4 lb
Length
43.7 in

3.66 m (12 ft) Straight Snow Push with steel trip edge

Working Width
144 in
Weight
1402.1 lb
Length
45 in

3.05 m (10 ft) Straight Snow Push with rubber cutting edge

Working Width
120 in
Weight
866.4 lb
Length
43.7 in

3.66 m (12 ft) Straight Snow Push with rubber trip edge

Working Width
144 in
Weight
1347 lb
Length
45 in

3.05 m (10 ft) Straight Snow Push with steel trip edge

Working Width
120 in
Weight
1201.5 lb
Length
45 in

3.05 m (10 ft) Straight Snow Push with rubber trip edge

Working Width
120 in
Weight
1153 lb
Length
45 in

2.44 m (8 ft) Straight Snow Push with rubber cutting edge

Working Width
96 in
Weight
778.2 lb
Length
43.7 in

2.44 m (8 ft) Straight Snow Push with steel trip edge

Working Width
96 in
Weight
1082.5 lb
Length
45 in

3.1 m (10 ft) Snow Wing

Working Width (Wings Closed)
121.3 in
Overall Width (Wings Closed)
128.1 in
Overall Width (Wings Open)
195.9 in

3.7 m (12 ft) Snow Wing

Working Width (Wings Closed)
145 in
Overall Width (Wings Closed)
151.8 in
Overall Width (Wings Open)
219.5 in

2.44 m (8 ft) Straight Snow Push with rubber trip edge

Working Width
96 in
Weight
1036.2 lb
Length
45 in

2.4 m (8 ft) Snow Wing

Working Width (Wings Closed)
96.5 in
Overall Width (Wings Closed)
104.2 in
Overall Width (Wings Open)
161.7 in

2.8 m (9 ft) Snow Wing

Working Width (Wings Closed)
108.5 in
Overall Width (Wings Closed)
116.2 in
Overall Width (Wings Open)
173.7 in

3.0 m (10 ft) Snow Plow

Width
119.9 in
Angled Width
98.3 in
Weight
1217 lb

2.7 m (9 ft) Snow Plow

Width
108 in
Angled Width
88.5 in
Weight
1161.8 lb

1.8 m (6 ft) Snow Plow

Width
71.9 in
Angled Width
59 in
Weight
992.1 lb

2.1 m (7 ft) Snow Plow

Width
84 in
Angled Width
68.8 in
Weight
1051.6 lb

2.4 m (8 ft) Snow Plow

Width
95.9 in
Angled Width
78.6 in
Weight
1106.7 lb

SR321 Snow Blower

Intake Width
76.5 in
Overall Width
85.9 in
Weight
1016.3 lb

SR418 Snow Blower

Intake Width
76.5 in
Overall Width
85.9 in
Weight
1016.3 lb

SR121 Snow Blower

Intake Width
76.5 in
Overall Width
85.9 in
Weight
974.4 lb

SR318 Snow Blower

Intake Width
63.5 in
Overall Width
73.9 in
Weight
996.5 lb

2134 mm (84 in) Multi V-Plow

Straight Width
84 in
Angled Width
73 in
Interface Type
Skid Steer Coupler

SR118 Snow Blower

Intake Width
63.5 in
Overall Width
73.9 in
Weight
954.6 lb

1524 mm (60 in) Multi V-Plow

Straight Width
60 in
Angled Width
53 in
Interface Type
Skid Steer Coupler

SW380, 250 mm (10 in) Wheel Saw

Maximum Cutting Depth
31.5 in
Wheel Width
9.8 in
Weight
3196.7 lb

SW360, 200 mm (8 in) Wheel Saw

Maximum Cutting Depth
23.6 in
Wheel Width
7.9 in
Weight
2921.1 lb

SW360, 80 mm (3 in) Wheel Saw

Maximum Cutting Depth
23.6 in
Wheel Width
3.1 in
Weight
3174.7 lb

SW360, 130 mm (5 in) Wheel Saw

Maximum Cutting Depth
23.6 in
Wheel Width
5.1 in
Weight
3009.3 lb

SW360, 100 mm (4 in) Wheel Saw

Maximum Cutting Depth
23.6 in
Wheel Width
3.9 in
Weight
2943.2 lb

SW360, 160 mm (6 in) Wheel Saw

Maximum Cutting Depth
23.6 in
Wheel Width
6.3 in
Weight
2899.1 lb

SW345, 80 mm (3 in) Wheel Saw

Maximum Cutting Depth
17.7 in
Wheel Width
3.1 in
Weight
2482.4 lb

SW345, 130 mm (5 in) Wheel Saw

Maximum Cutting Depth
17.7 in
Wheel Width
5.1 in
Weight
2239.9 lb

T315 High Flow Trencher with standard teeth

Standard Boom Length
60 in
Cutting Width
8 in
Chain Type
Standard

T315 High Flow Trencher with combo teeth

Standard Boom Length
60 in
Cutting Width
6 in
Chain Type
Standard

T315 High Flow Trencher with no chain

Standard Boom Length
60 in
Required Hydraulics
High Flow XPS
Overall Width
74.8 in

T112 Manual Trencher with standard teeth

Standard Boom Length
48 in
Cutting Width
6 in
Chain Type
Standard

T112 Manual Trencher with rockfrost teeth

Standard Boom Length
48 in
Cutting Width
6 in
Chain Type
Rockfrost

T315 High Flow Trencher with standard teeth

Standard Boom Length
60 in
Cutting Width
6 in
Chain Type
Standard

T112 Hydraulic Trencher with standard teeth

Standard Boom Length
48 in
Cutting Width
6 in
Chain Type
Standard

T112 Manual Trencher with combo teeth

Standard Boom Length
48 in
Cutting Width
6 in
Chain Type
Combo

T112 Manual Trencher with no chain

Standard Boom Length
48 in
Required Hydraulics
Standard Flow
Overall Width
74.8 in

T112 Hydraulic Trencher with rockfrost teeth

Standard Boom Length
48 in
Cutting Width
6 in
Chain Type
Rockfrost

T112 Hydraulic Trencher with combo teeth

Standard Boom Length
48 in
Cutting Width
6 in
Chain Type
Combo

T112 Hydraulic Trencher with no chain

Standard Boom Length
48 in
Required Hydraulics
Standard Flow
Overall Width
74.8 in

T109 Manual Trencher with standard teeth

Standard Boom Length
36 in
Cutting Width
8 in
Chain Type
Standard

T112 Hydraulic Trencher with standard teeth

Standard Boom Length
48 in
Cutting Width
8 in
Chain Type
Standard

T109 Manual Trencher with no chain

Standard Boom Length
36 in
Required Hydraulics
Standard Flow
Overall Width
56.1 in

T109 Manual Trencher with terminator teeth

Standard Boom Length
36 in
Cutting Width
6 in
Chain Type
Terminator

T109 Manual Trencher with rockfrost teeth

Standard Boom Length
36 in
Cutting Width
6 in
Chain Type
Rockfrost

T109 Manual Trencher with standard teeth

Standard Boom Length
36 in
Cutting Width
6 in
Chain Type
Standard

T109 Hydraulic Trencher with standard teeth

Standard Boom Length
36 in
Cutting Width
6 in
Chain Type
Standard

T109 Manual Trencher with combo teeth

Standard Boom Length
36 in
Cutting Width
6 in
Chain Type
Combo

T109 Hydraulic Trencher with no chain

Standard Boom Length
36 in
Required Hydraulics
Standard Flow
Overall Width
56.1 in

T109 Hydraulic Trencher with combo teeth

Standard Boom Length
36 in
Cutting Width
6 in
Chain Type
Combo

T109 Hydraulic Trencher with rockfrost teeth

Standard Boom Length
36 in
Cutting Width
6 in
Chain Type
Rockfrost

T109 Hydraulic Trencher with standard teeth

Standard Boom Length
36 in
Cutting Width
8 in
Chain Type
Standard

T109 Hydraulic Trencher with terminator teeth

Standard Boom Length
36 in
Cutting Width
6 in
Chain Type
Terminator

LT114 Landscape Tiller

Working Width
53.3 in
Working Depth
25-152 mm (1-6 in)
Weight
925.9 lb

LT118 Landscape Tiller

Working Width
72.8 in
Working Depth
25-152 mm (1-6 in)
Weight
925.9 lb

0.8 m3 (1.0 yd3) Skid Steer Coupler Multi-Purpose Bucket

Width
74.4 in
Weight
684.1 lb
Height
36.5 in

0.9 m3 (1.2 yd3) ISO Coupler Multi-Purpose Bucket With Bolt-On Cutting Edge

Width
81.9 in
Weight
1265 lb
Height
36.7 in

Specifications

Standard/Optional Features

Attachments