New Cat 907 Compact Wheel Loader 67959

Description

Cat® wheel loaders set the standard for productivity, fuel efficiency and operator comfort. The Cat 907 Compact Wheel Loader has a high torque C2.8 engine that works in conjunction with an intelligent hystat power train to deliver exceptional fuel efficiency. “Shift on the go” locking differentials and hydrostatic transmission provide smooth and powerful operation while increasing the efficiency of machine cycles.

Features

Maximum Gross Power

74.7 hp

Operating Weight

12,765 lb

Bucket Capacities

0.75-1.55 m³ (1.0-2.0 yd³)

Recyclability

93%

Options:

Share Print Download PDF

Engine
Maximum Gross Power
74.7 hp
Engine Model
Cat C2.8*
Maximum Engine Speed
2,550 rpm
Maximum Gross Power - Rated Engine Speed
2,400 r/min
Maximum Gross Power - SAE J1995
74.7 hp
Maximum Gross Power - ISO 14396
74.3 hp
Maximum Gross Power - ISO 14396 (metric)
75.3 mhp
Rated Net Power - Rated Engine Speed
2,400 r/min
Rated Net Power - SAE J1349
72.7 hp
Rated Net Power - ISO 9249
72.1 hp
Rated Net Power - 2,400 rpm - ISO 9249 (metric)
73.1 mhp
Maximum Gross Torque - SAE J1995
222 lb/ft
Maximum Gross Torque - ISO 14396
221 lb/ft
Maximum Net Torque - SAE J1349
218 lb/ft
Maximum Net Torque - ISO 9249
217 lb/ft
Displacement
171 in³
Bore
3.54 in
Stroke
4.33 in
Note
*Meets U.S. EPA Tier 4 Final and EU Stage V emission standards.
Note (1)
Advertised power is tested per the specified standard in effect at the time of manufacture.
Note (2)
Net power advertised is the power available at the flywheel.
Note (3)
#Maximum gross and net torque measured at 1,600 rpm.
Weights
Operating Weight
12,765 lb
Buckets
Bucket Capacities
0.75-1.55 m³ (1.0-2.0 yd³)
Bucket Capacities - General Purpose
0.80-1.35 m³ (1.0-1.7 yd³)
Bucket Capacities - Light Material
1.25-1.55 m³ (1.6-2.0 yd³)
Multi-Purpose
0.75-1.1 m³ (1.0-1.4 yd³)
Note
Bucket selection must be made with an understanding of the material density and application to ensure machine stability is maintained within the tipping loads stated per model and configuration.
Note (1)
Bucket capacities stated include BOCE, in line with ISO 7,546.
Sustainability
Recyclability
93%
Service Refill Capacities
Fuel Tank
24 Gal
Cooling System
3.2 Gal
Engine Crankcase
2.3 Gal
Axles - Front Center Differential
2.3 Gal
Axles - Rear Center Differential
2.3 Gal
Hydraulic System - Including Tank
17.8 Gal
Hydraulic Tank
11.8 Gal
Transmission
0.6 Gal
Note
No Diesel Exhaust Fluid (DEF) fluid needed on this size engine.
Axles
Front
Fixed (standard), Locking Differential (optional)
Rear
Fixed (standard), Locking Differential (optional)
Note
Oscillation of ±11 degrees via hitch between front and rear frames.
Steering
Steering Articulation Angle - Each Direction
39 °
Maximum Flow - Steering Pump
12.3 gpm
Maximum Working Pressure - Steering Pump
3,336 psi
Steering Cycle Times – (full left to full right) – at High Idle
2.8 s
Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left
3.25 turns or 4.00 turns
Transmission
Forward and Reverse - Speed Range Creep#
6 mile/h
Forward and Reverse - Speed Range 1*
6 mile/h
Forward and Reverse - Speed Range 2** - High Speed
10.5 mile/h
Forward and Reverse - Speed Range 2** - Standard
12 mile/h
Forward and Reverse - Speed Range 3***
25 mile/h
Note
#Factory default shown, can be adjusted to any speed up to 19 km/h (12 mph).
Note (1)
*Creep function not available in this gear or above.
Note (2)
**Max speed dependent on model and configuration (standard vs. high speed transmission).
Note (3)
***Reverse is 30 km/h (19 mph).
Tires
Tire Size - Standard
*405/70 R18 SPT9
Tire Size - Optional
405/70 R18 Powerloads
Tire Size - Optional (1)
340/80 R18 XMCL/Bibload
Tire Size - Optional (2)
340/80 R18 TRI 2
Tire Size - Optional (3)
40X14-20 TL, SM/TR
Tire Size - Optional 4
340/80 R18 Duraforce
Note
*This tire has been used for all dimension, stability and performance data.
Note (1)
Other tire choices are available. Contact your Cat dealer for details.
Note (2)
Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
Cab
ROPS
ISO 3,471:2,008
FOPS
ISO 3,449:2,005 Level II
Note (1)
Canopy and cab, Rollover Protective Structures (ROPS) are available worldwide. Canopy not available in EU.
Note (2)
The declared dynamic operator sound pressure levels per ISO 6,396:2,008*, when properly installed and maintained, is 71 dB(A).
Note (3)
*Measurements were conducted with the cab doors and windows closed.
Note (4)
The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2,000/14/EC is 101 dB(A). 99 dB(A) Low Sound – Option available.
Loader Hydraulic System
Main Relief - 1st Auxiliary (3rd slice)
3,408 psi
Main Relief - 1st Auxiliary (3rd slice) - Standard Flow*
21 gpm
Main Relief - 1st Auxiliary (3rd slice) - High Flow*
32 gpm
Main Relief - 2nd Auxiliary (4th slice)
3,408 psi
Main Relief - 2nd Auxiliary (4th slice) - Flow
12 gpm
Hydraulic Cycle Time - Rackback
2.2 s
Hydraulic Cycle Time - Lift
5 s
Hydraulic Cycle Time - Dump
1.6 s
Hydraulic Cycle Time - Float Down
2.8 s
Note
* Maximum flow stated, actual flow delta could be 6% from data shown. Also adjustable from 20% to 100% of maximum flow through display.
Dimensions - With HPL-V Coupler - Approximate#
Height: Ground to Cab**
8.5 ft
Height: Ground to Beacon**
9.08 ft
Height: Ground Axle Center**
1.58 ft
Height: Ground Clearance**
1 ft
Length: Overall*
17.58 ft
Length: Rear Axle to Bumper
4.58 ft
Length: Hitch to Front Axle
3.58 ft
Length: Wheel Base
7.08 ft
Length: Front Axle to Front of Coupler
3.5 ft
Clearance: Bucket at 45° *
8.25 ft
Clearance: Load over Height**
9.5 ft
Clearance: Level Bucket**
9.92 ft
Height: Bucket Pin**
10.67 ft
Height: Overall**
13.5 ft
Reach: Bucket at 45° *
2.33 ft
Carry Height: Bucket Pin
1.08 ft
Dig Depth**
0.33 in
Width: Bucket
6.75 ft
Width: Tread Center
4.67 ft
Turning Radius: Over Bucket
14.75 ft
Width: Over Tires
6.07 ft
Turning Radius: Outside of Tires
12.92 ft
Turning Radius: Inside of Tires
6.75 ft
Rack Angle at Full Lift
56°
Dump Angle at Full Lift
45°
Rack Angle at Carry
51°
Departure Angle - Degrees
30°
Articulation Angle - Degrees
39°
Operating Weight: Bucket ^
12,689 lb
Tipping Load - Straight - ISO 14397-1 †
9,773 lb
Tipping Load - Full Turn - ISO 14397-1 †
8,235 lb
Operating Weight: Carriage and Tines ^^
12,220 lb
Tipping Load - Straight †
7,807 lb
Tipping Load - Full Turn †
6,569 lb
80% of Tip: Firm and Level EN474-3 ††
5,255 lb
Note (1)
*Vary with bucket
Note (2)
**Vary with tire
Note (3)
^Horizontal Pin Lock Coupler (HPL-V) or Vertical Pin Coupler (SSL),1.05 m3 (1.4 yd3) general purpose bucket.
Note (4)
^^Horizontal Pin Lock Coupler (HPL-V) or Vertical Pin Coupler (SSL), class II carriage, 1,220 mm (4 ft) tines (500 mm [20 in] load center).
Note (5)
†Full compliance to ISO 14,397-1 (2,007) Sections 1 thru 6 (fork 500 mm [20 in] load center), which requires 2% verification between calculation and testing.
Note (6)
††Full compliance to EN474-3 and SAE J1,197.
Note (7)
#HPL-A weight, tipping and rated loads are within 1% of the HPL-V.
Note (8)
Dimensions listed are for a machine configured with standard cab, heater, 20 km/h (12 mph), standard guarding, 80 kg (176 lb) operator, full fluids, SPT9 405/70 R18 tires and 1.05 m3 (1.4 yd3) general purpose bucket with bolt-on cutting edge or a class II
Note (9)
Note: Goodyear POWERLOAD® tires can add up to approximately 140 kg (305 lb) to the full turn tip load and reduce vertical height by approximately 25 mm (1 in) compared to SPT9.
Dimensions - With SSL Coupler - Approximate
Height - Ground to Cab
8.5 ft
Height: Ground to Beacon**
9.08 ft
Height: Ground Axle Center**
1.58 ft
Height - Ground Clearance
1 ft
Length - Overall with Bucket
18.17 ft
Length: Rear Axle to Bumper
4.58 ft
Length: Hitch to Front Axle
3.58 ft
Length - Wheel Base
7.08 ft
Length: Front Axle to Front of Coupler
4.33 ft
Clearance - Bucket at 45°
7.83 ft
Clearance: Load over Height**
9.5 ft
Clearance - Level Bucket
9.92 ft
Height - Bucket Pin
10.67 ft
Height: Overall**
13.83 ft
Reach - Bucket at 45°
2.67 ft
Carry Height: Bucket Pin
1.17 ft
Dig Depth
3 in
Width - Bucket
6.75 ft
Width - Tread Center
4.67 ft
Turning Radius - Over Bucket
15 ft
Width - Over Tires
6.08 ft
Turning Radius: Outside of Tires
12.92 ft
Turning Radius - Inside Tire
6.75 ft
Rack Angle at Full Lift
51°
Dump Angle at Full Lift
50°
Rack Angle at Carry
46°
Departure Angle - Degrees
30°
Articulation Angle - Degrees
39°
Operating Weight: Bucket ^
12,897 lb
Tipping Load – Straight – ISO 14397-1 †
8,653 lb
Tipping Load – Full Turn – ISO 14397-1 †
7,257 lb
Operating Weight: Carriage and Tines ^^
12,414 lb
Tipping Load - Straight †
7,416 lb
Tipping Load - Full Turn †
6,266 lb
80% of Tip: Firm and Level EN474-3 ††
5,013 lb
Note (1)
*Vary with bucket
Note (2)
**Vary with tire
Note (3)
^Horizontal Pin Lock Coupler (HPL-V) or Vertical Pin Coupler (SSL),1.05 m3 (1.4 yd3) general purpose bucket.
Note (4)
^^Horizontal Pin Lock Coupler (HPL-V) or Vertical Pin Coupler (SSL), class II carriage, 1,220 mm (4 ft) tines (500 mm [20 in] load center).
Note (5)
†Full compliance to ISO 14,397-1 (2,007) Sections 1 thru 6 (fork 500 mm [20 in] load center), which requires 2% verification between calculation and testing.
Note (6)
††Full compliance to EN474-3 and SAE J1,197.
Note (7)
#HPL-A weight, tipping and rated loads are within 1% of the HPL-V.
Note (8)
Dimensions listed are for a machine configured with standard cab, heater, 20 km/h (12 mph), standard guarding, 80 kg (176 lb) operator, full fluids, SPT9 405/70 R18 tires and 1.05 m3 (1.4 yd3) general purpose bucket with bolt-on cutting edge or a class II
Note (9)
Note: Goodyear POWERLOAD® tires can add up to approximately 140 kg (305 lb) to the full turn tip load and reduce vertical height by approximately 25 mm (1 in) compared to SPT9.

Standard Equipment
Electrical
- Product Link^™
- Service (Electronic Technician^™)
- Lights, roading, front halogen
- Lights, rear stop and turn, LED
- Cab mounted fuse panel
- Battery disconnect switch
- Battery, heavy duty, 12V, 90Ah and 1,000 CCA
- Alternator, 100 amp sealed
Hydraulics
- Motor, single drive with dedicated implement and steering pumps
- Multi-function lift and tilt with loader arm float
- Joystick, single lever, single auxiliary roller
- Implement valve, pressure compensated
- Hystat displacement pump, infinitely variable
- Caterpillar HYDO^™ Advanced 10 hydraulic oil
- Coupler/pin on attachment ready
- Demand cooling fan, hydraulically driven
- Dead engine lower, lift valve, manual
- Electro-hydraulic, fully proportional controls
- Hydraulic pilot shut off switch, in cab
Operator Environment
- Cab
  –Doors (2), fixed glass
  –Wipers, front and rear, full front coverage
  –Windshield, front single piece
  –Window, rear heated
  –Radio ready, speakers and wiring
  –Air vents, (4) screen, (7) directional
  –Heating, mechanical control unit
  –Sun visor, solid, front full width
  –Interior light (incandescent)
- Seat, manual height adjustment, (cab) fabric with adjustable left arm rest, (canopy) vinyl
- Joystick, seat mounted, standard multifunction
  –FNR, auxiliary roller, speed range select, continuous flow, differential lock, horn
  –Arm rest, padded right, multiple position vertical height
- Display, analog and digital
  –Gauges (2), hydraulic oil, engine coolant
  –Digital with soft touch buttons – fuel level, speed range, speedometer, service hour meter, service/maintenance information, hydraulic and power train performance and aggressiveness settings, security passcode (multiple languages)
- ROPS/FOPS certified canopy/cab
  –12V power outlets, interior/exterior
  –Pedals, raised, foot, brake/inching, accelerator
  –Lever, parking brake
  –Cup holders (2)
  –CB radio clip, phone holder
  –Door release, internal (left and right)
  –Hook, large, coat and hard hat
  –Floormat, heavy duty, easy clean
  –Mirrors, (2) external breakaway, (1) internal
  –Operator station on isolation mounts
  –Steering wheel, spinner knob, horn in center
  –Seat belt, orange, retractable, 51 mm (2 in)
  –Storage, personal (trays [3], seat pocket)
  –Steering column, tilt adjusted
  –Column mounted multi function control: lights, roading, wipers, self canceling turn signals
  –Quick coupler switch, in cab
Other
- Scheduled Oil Sampling (S·O·S℠) ports, engine oil and hydraulic oil
- Recovery hitch with pin
- Paint, Electro-Coat primer, gloss topcoat
- Machine lifting/tie down points
- Lockable, fuel cap, HVAC filters, nose cone
- Lockable main and side engine enclosures
- Loader arm safety brace
- Ground level easy access daily service points
- Fenders, front and rear
Power Train
- Fuel pump, priming (manual)/water separator/drain
- Engine oil, ECO drain tap and hose
- Engine, auto idle shutdown, hibernation mode
- Drive shaft, sealed for life, universal joints
- Coolant, extended life, –36° C (–33° F)
- Closed circuit breather
- Axles, heavy duty, frame mounted with outboard planetary reduction
- Air cleaner, two stage filter, with in cab audio/visual indicator on display
- Cat C2.8 engine
  –Diesel particulate filter (Fit for Life)
  –Fuel, diesel, ultra low or low Sulphur
  –Hydrostatic transmission, two speed, with inching function, “shift on the go”
  –Power train mode, hystat
- U.S. EPA Tier 4 Final and EU Stage V emissions compliant
Optional Equipment
Electrical
- Work tool wiring harness, (3) in cab switches
- Push to start
- Lighting packages, multiple; front, rear, engine bay (LED or HAL)
Hydraulics
- Quick disconnect auxiliary hydraulics
- Reversing fan
- Ride Control or load check valves
- Connect under pressure and case drain
- Caterpillar Bio HYDO Advanced hydraulic oil
- Auxiliary flow, single standard (3) valve, single high flow (3) valve, dual high flow (4) valve
Operator Station
- USB ports (2), interior
- Sun visor, rear perforated
- Storage, lockable box or lockable cooled box
- Soft touch keypad options, 8 or 16 button
- Secondary display, front or rear view camera
- Seat packages; deluxe or premium
- Seat belt options, multiple
- Radio, FM or digital audio broadcast
- Phone holder, spring loaded
- Mirrors (2) electronically adjustable, heated external, plus lower parabolic mirror
- Joystick, FNR, twin auxiliary roller, differential lock, horn
- Interior light, door activated
- Doors, sliding windows (left and right)
- Air Conditioning, automatic temperature control (ATC)
Other
- Rotary sensors (snubbing, kickouts, parallel)
- Couplers, vertical (SSL), horizontal (HPL-V, HPL-A)
Power Train
- Power train mode, utility (includes keypad)
- 40 km/h (25 mph) hydrostatic transmission, 3-speed, “shift on the go”, secondary steering and boosted brakes
- Fuel pump, priming, manual
- Creep and throttle lock function
- Cold start – jacket water heater, bypass valve
- Antifreeze, extended life coolant, –50° C (–58° F)

Buy a Cat 907 Compact Wheel Loader Near You Today

This model is one of the many equipment options Quinn Company has in stock for your heavy equipment needs. Our knowledgeable team will help you find the right model suited for your work and deliver industry-leading support long after the sale. Take advantage of our offers and get the best solution for your business. Get a quote for a Cat 907 Compact Wheel Loader machine online or contact our professionals for more information about our equipment.