Caterpillar is leading the power generation marketplace with Power Solutions engineered to deliver unmatched flexibility, expandability, reliability, and cost-effectiveness.
|
|
|
|
|
|
|
|
Generator Set Specifications
- Maximum Rating
- 550 kVA
- Minimum Rating
- 365 kVA
- Emissions/Fuel Strategy
- Tier 2 or Tier 3
- Voltage
- 208 to 600 Volts
- Frequency
- 50 Hz
- Speed
- 1500 rpm
- Duty Cycle
- Standby, Prime
Engine Specifications
- Engine Model
- C15 ATAAC, I-6, 4-Stroke Water-Cooled Diesel
- Bore
- 5.4in
- Stroke
- 6.75in
- Displacement
- 927.56in³
- Compression Ratio
- 16.1:1
- Aspiration
- Air to Air Aftercooled
- Fuel System
- MEUI
- Governor Type
- Adem™A4
Generator Set Dimensions
- Length - Maximum
- 150.8in
- Width - Maximum
- 58.3in
- Height - Maximum
- 86.3in
Standard Equipment:
-
- Air System
-
- Turbocharger
- Aftercooler core
- Air cleaner - Non canister disposable paper filter
-
- Air Inlet
-
- Air cleaner
-
- Control Panel
-
- GCCP 1.3
-
- Cooling
-
- Package mounted radiator
-
- Cooling System
-
- Caterpillar extended life coolant
- Radiator and cooling fan with guard
- Fan drive, battery charging alternator drive
- Coolant drain line with valve
-
- Exhaust
-
- Base, formed steel with single wall integral 8-hour fuel tank
- Standard open set fuel tank/base supplied
-
- Fuel
-
- Primary fuel filter with integral water separator
- Secondary fuel filters
- Fuel priming pump
-
- Fuel System
-
- Engine fuel transfer pump
- Primary fuel filter w/integral water separator and secondary filter
- Fuel priming pump
- Flexible fuel lines
- Fuel cooler
-
- Generator
-
- Matched to the performance and output characteristics of Cat engines
- IP23 Protection
- Load adjustment module provides engine relief upon load impact and improves load acceptance and recovery time
-
- Power Termination
-
- Busbar
-
- Generator And Attachments
-
- Mandatory option circuit breaker, IEC, 3 pole, mounted in power centre
- Optional LC Frame generator - IP23 Protection
- Segregated low voltage (AC/DC) wiring panel
- Integrated voltage regulator (IVR)
- Power center, IP22
-
- Mounting
-
- Rubber vibration isolators
-
- Governing System
-
- Cat electronic governor (ADEM A4).
-
- Lube System
-
- Oil cooler
- Oil drain valves
-
- Mounting System
-
- Captive linear vibration isolators between base and engine-generator includes lifting provisions and termination points for coolant and lube oil drain lines
-
- Starting/charging
-
- 24 Volt battery with rack and cables
-
- General
-
- Engine and alternator pre paint, Caterpillar yellow
Optional Equipment:
-
- Air Inlet System
-
- Single element air cleaner
- Dual element air cleaner
-
- Exhaust
-
- Industrial, residential, critical mufflers
-
- Certifications
-
- EU Certificate of Conformance (CE)
- Global certification for CIS
-
- Generator
-
- Excitation: [ ] Permanent magnet excitation (PMG) Excited (PM) [ ] Internally Excited (IE)
- Oversize and premium generators
- Anti-condensation heater
-
- Power Termination
-
- Circuit breakers, UL listed
- Circuit breakers, IEC compliant
-
- Circuit Breakers
-
- Shunt trip for IEC circuit breaker
- 4 Pole (IEC-100% rated) Circuit breakers - Package mounted
- Auxiliary contacts, circuit breaker
- 3 Pole (IEC-100% rated) Circuit breakers - Package mounted
- 3 Pole (IEC-100% rated) Circuit breakers - Motorised
- Power terminal strip
- 4 Pole (IEC-100% rated) Circuit breakers - Motorised
- Padlockable circuit breaker device
-
- Generator And Attachments
-
- Permanent magnet excitation (PMG) generator
- LC frame CIP generator
- Oversize LC frame generator
- Space heaters
- CIP A Frame generator
- Oversize A Frame generator
- Ingress protection
- A Frame generator - IP21 Protection
- LC frame generator
-
- Control Panels
-
- Fuel level sensor
- Volt free contacts
- Oil temperature displays
- Local annunciator
- GCCP 1.4
- Local alarm horn
- Remote annunciator module
-
- Starting/charging
-
- Oversize batteries
- Battery chargers
- Jacket water heater
- Heavy duty starting system
- Charging alternator
-
- Cooling System
-
- Low coolant temperature alarm
- Stone guards
- Radiator duct flange
-
- General
-
- Narrow, wide or skid base
- Single or dual wall integral fuel tanks
- Seismic Certification per applicable building codes: IBC 2000, IBC 2003, IBC 2006, IBC 2009, CBC 2007
- The following options are based on regional and product configuration:
- Automatic transfer switches (ATS)
- Integral & sub-base UL listed dual wall fuel tanks
- CSA Certification
- EEC Declaration of Conformity
- Single or dual wall sub-base fuel tanks
- UL 2200 package
- Sound attenuated, weather protective or high ambient weather protective enclosure
- EU Certificate of Conformance (CE)
-
- Enclosures
-
- High ambient sound attenuated enclosures
- Sound attenuated enclosures
-
- Exhaust System
-
- 6 and 8 inch elbow kit
- Manifold and turbocharger guards
- End in/end out mufflers - 10, 25 and 35 dBA attenuation
- Engine mounted muffler
- 6 and 8 inch flange GP
- Flexible exhaust fittings
-
- Fuel System
-
- Fuel transfer system controls
- Manual fuel transfer pump
- Dual wall fuel tank base
-
- Lube System
-
- Manual sump pump
-
- Mounting System
-
- Narrow skid base - replaces standard fuel tank base
-
- Special Test / Reports
-
- PGS Test report @ 1.0 power factor
- PGS Test report @ 0.8 power factor
-
- Starting / Charging System
-
- 5 Amp single Battery charger
- Jacket water heater
- Battery disconnect switch
C13, C15, C18 WP Enclosure. 350-600 kW 60 Hz
- Height
- 2320 - 3209 mm
- Length
- 4948 - 7271 mm
- Width
- 2014 - 2056 mm
C13, C15, C18 SA enclosure. 350-600 kW 60 Hz
- Length
- C13 - 5461 mm, C15 - 4948 mm, C18 - 5187 mm
- Width
- C13, C15 & C18 - 2014 mm
- Height
- C13 - 2743 mm, C15 - 2619 mm, C18 - 2561 mm
C15 Sound Attenuated Enclosure 50 and 60 Hz
- Length
- 4930 mm
- Width
- 1658 mm
- Weight
- 5071 kg
Emergency Transfer Load manager
- Configuration
- Wall mounted paralleling control system that monitors and controls a single generator and a single utility.
- Modes of Operation
- Utility Import, Export, and base load operations, Peak shaving, and Emergency Standby. Closed Transition to/from Generator Power
- Application
- LV and MV (208V-32kV)
Specifications
Generator Set Specifications
- Maximum Rating
- 550 kVA
- Minimum Rating
- 365 kVA
- Emissions/Fuel Strategy
- Tier 2 or Tier 3
- Voltage
- 208 to 600 Volts
- Frequency
- 50 Hz
- Speed
- 1500 rpm
- Duty Cycle
- Standby, Prime
Engine Specifications
- Engine Model
- C15 ATAAC, I-6, 4-Stroke Water-Cooled Diesel
- Bore
- 5.4in
- Stroke
- 6.75in
- Displacement
- 927.56in³
- Compression Ratio
- 16.1:1
- Aspiration
- Air to Air Aftercooled
- Fuel System
- MEUI
- Governor Type
- Adem™A4
Generator Set Dimensions
- Length - Maximum
- 150.8in
- Width - Maximum
- 58.3in
- Height - Maximum
- 86.3in
Standard/Optional Features
Standard Equipment:
-
- Air System
-
- Turbocharger
- Aftercooler core
- Air cleaner - Non canister disposable paper filter
-
- Air Inlet
-
- Air cleaner
-
- Control Panel
-
- GCCP 1.3
-
- Cooling
-
- Package mounted radiator
-
- Cooling System
-
- Caterpillar extended life coolant
- Radiator and cooling fan with guard
- Fan drive, battery charging alternator drive
- Coolant drain line with valve
-
- Exhaust
-
- Base, formed steel with single wall integral 8-hour fuel tank
- Standard open set fuel tank/base supplied
-
- Fuel
-
- Primary fuel filter with integral water separator
- Secondary fuel filters
- Fuel priming pump
-
- Fuel System
-
- Engine fuel transfer pump
- Primary fuel filter w/integral water separator and secondary filter
- Fuel priming pump
- Flexible fuel lines
- Fuel cooler
-
- Generator
-
- Matched to the performance and output characteristics of Cat engines
- IP23 Protection
- Load adjustment module provides engine relief upon load impact and improves load acceptance and recovery time
-
- Power Termination
-
- Busbar
-
- Generator And Attachments
-
- Mandatory option circuit breaker, IEC, 3 pole, mounted in power centre
- Optional LC Frame generator - IP23 Protection
- Segregated low voltage (AC/DC) wiring panel
- Integrated voltage regulator (IVR)
- Power center, IP22
-
- Mounting
-
- Rubber vibration isolators
-
- Governing System
-
- Cat electronic governor (ADEM A4).
-
- Lube System
-
- Oil cooler
- Oil drain valves
-
- Mounting System
-
- Captive linear vibration isolators between base and engine-generator includes lifting provisions and termination points for coolant and lube oil drain lines
-
- Starting/charging
-
- 24 Volt battery with rack and cables
-
- General
-
- Engine and alternator pre paint, Caterpillar yellow
Optional Equipment:
-
- Air Inlet System
-
- Single element air cleaner
- Dual element air cleaner
-
- Exhaust
-
- Industrial, residential, critical mufflers
-
- Certifications
-
- EU Certificate of Conformance (CE)
- Global certification for CIS
-
- Generator
-
- Excitation: [ ] Permanent magnet excitation (PMG) Excited (PM) [ ] Internally Excited (IE)
- Oversize and premium generators
- Anti-condensation heater
-
- Power Termination
-
- Circuit breakers, UL listed
- Circuit breakers, IEC compliant
-
- Circuit Breakers
-
- Shunt trip for IEC circuit breaker
- 4 Pole (IEC-100% rated) Circuit breakers - Package mounted
- Auxiliary contacts, circuit breaker
- 3 Pole (IEC-100% rated) Circuit breakers - Package mounted
- 3 Pole (IEC-100% rated) Circuit breakers - Motorised
- Power terminal strip
- 4 Pole (IEC-100% rated) Circuit breakers - Motorised
- Padlockable circuit breaker device
-
- Generator And Attachments
-
- Permanent magnet excitation (PMG) generator
- LC frame CIP generator
- Oversize LC frame generator
- Space heaters
- CIP A Frame generator
- Oversize A Frame generator
- Ingress protection
- A Frame generator - IP21 Protection
- LC frame generator
-
- Control Panels
-
- Fuel level sensor
- Volt free contacts
- Oil temperature displays
- Local annunciator
- GCCP 1.4
- Local alarm horn
- Remote annunciator module
-
- Starting/charging
-
- Oversize batteries
- Battery chargers
- Jacket water heater
- Heavy duty starting system
- Charging alternator
-
- Cooling System
-
- Low coolant temperature alarm
- Stone guards
- Radiator duct flange
-
- General
-
- Narrow, wide or skid base
- Single or dual wall integral fuel tanks
- Seismic Certification per applicable building codes: IBC 2000, IBC 2003, IBC 2006, IBC 2009, CBC 2007
- The following options are based on regional and product configuration:
- Automatic transfer switches (ATS)
- Integral & sub-base UL listed dual wall fuel tanks
- CSA Certification
- EEC Declaration of Conformity
- Single or dual wall sub-base fuel tanks
- UL 2200 package
- Sound attenuated, weather protective or high ambient weather protective enclosure
- EU Certificate of Conformance (CE)
-
- Enclosures
-
- High ambient sound attenuated enclosures
- Sound attenuated enclosures
-
- Exhaust System
-
- 6 and 8 inch elbow kit
- Manifold and turbocharger guards
- End in/end out mufflers - 10, 25 and 35 dBA attenuation
- Engine mounted muffler
- 6 and 8 inch flange GP
- Flexible exhaust fittings
-
- Fuel System
-
- Fuel transfer system controls
- Manual fuel transfer pump
- Dual wall fuel tank base
-
- Lube System
-
- Manual sump pump
-
- Mounting System
-
- Narrow skid base - replaces standard fuel tank base
-
- Special Test / Reports
-
- PGS Test report @ 1.0 power factor
- PGS Test report @ 0.8 power factor
-
- Starting / Charging System
-
- 5 Amp single Battery charger
- Jacket water heater
- Battery disconnect switch
Attachments
C13, C15, C18 WP Enclosure. 350-600 kW 60 Hz
- Height
- 2320 - 3209 mm
- Length
- 4948 - 7271 mm
- Width
- 2014 - 2056 mm
C13, C15, C18 SA enclosure. 350-600 kW 60 Hz
- Length
- C13 - 5461 mm, C15 - 4948 mm, C18 - 5187 mm
- Width
- C13, C15 & C18 - 2014 mm
- Height
- C13 - 2743 mm, C15 - 2619 mm, C18 - 2561 mm
C15 Sound Attenuated Enclosure 50 and 60 Hz
- Length
- 4930 mm
- Width
- 1658 mm
- Weight
- 5071 kg
Emergency Transfer Load manager
- Configuration
- Wall mounted paralleling control system that monitors and controls a single generator and a single utility.
- Modes of Operation
- Utility Import, Export, and base load operations, Peak shaving, and Emergency Standby. Closed Transition to/from Generator Power
- Application
- LV and MV (208V-32kV)