The Caterpillar 908 Compact Wheel Loader is built to the same high standards as larger Caterpillar wheel loaders. This machine delivers Cat reliability, durability and efficient operation, even in the toughest working conditions.
|
|
|
|
Engine
- Net Power
- 76HP
- Gross Power
- 84HP
- ISO 9249 Rating
- 80HP
- EEC 80/1269 Rating
- 80HP
- SAE J1349 Rating
- 80HP
- Model
- 3044C
Weights
- Operating Weight
- 13288lb
Operating Specifications
- Rated Bucket Capacity
- 1.3yd³
- Rated Operating Load at Full Turn - Forks
- 5291lb
- Full Turn Static Tipping Load - Forks
- 6860lb
- Breakout Force
- 13710lb
- Rated Operating Load at Full Turn - Bucket
- 4136lb
- Straight Tipping Load - Bucket
- 9636lb
- Hydraulic Lift Capacity
- 9900lb
- Full Turn Static Tipping Load - Bucket
- 8270lb
- Rack Back - Transport Position
- 56°
- Dump Height at Full Lift
- 10.4ft
- Reach - Without Teeth
- 2.75ft
- Articulation
- 40°
- Oscillation +/-
- 11°
Engine Dimensions
- Bore
- 3.7in
- Stroke
- 4.72in
Dimensions
- Tread Width
- 5.2ft
Buckets
- Bucket Width
- 6.9ft
Cab
- ROPS
- meets the following criteria: SAE J1040 MAY94, ISO 3471-1:1986
- FOPS
- meets the following criteria: SAE J231 JAN81, ISO 3449:1992
- Sound
- Sound level is below 75 dB(A)
Power Train, Axles and Brakes
- Transmission Type
- Closed-loop, two-speed hydrostatic single-path transmission.
- Maximum Travel Speeds - With 12.5-18 Tires, Forward and Reverse, Low
- 4mile/h
- Maximum Travel Speeds - Forward and Reverse, High
- 12mile/h
- Axle and Final Drives
- fixed front axle with limited slip differential and planetary ge
- Service and Parking Brake
- Are combined in a single, dry-disc driveline brake
- Brake Standards
- Brake meets ISO 3450:1996
Hydraulic System
- Pressure Flow at 2,600 rpm and 70 bar (1,000 psi)
- 15.9gal/min
- 3rd Valve Flow
- 21.6gal/min
- Hydraulic Cycle Time - Lower, Float
- 3.2
- Main Relief
- 3400psi
Loader Hydraulic System
- Hydraulic Cycle Time - Lift
- 4.5
- Hydraulic Cycle Time - Dump
- 2.4
Maximum Material Densities
- General Purpose Bucket - 0.6 m3 (0.8 yd3)
- 3760lb/yd³
- Multi Purpose Bucket - 0.6 m3 (0.8 y3)
- 3300lb/yd³
- Light Material - Bucket 1.0 m3 (1.3 yd)
- 1675lb/yd³
- High Dump Bucket - 0.7 m3 (0.8 yd3)
- 3230lb/yd³
- Stone Sieve Bucket - 0.6 m3 (0.8 yd3)
- 3380lb/yd³
- Side Dump Bucket
- 3105lb/yd³
Service Refill Capacities
- Cooling System
- 5.8gal (US)
- Fuel Tank
- 21gal (US)
- Hydraulic System
- 17gal (US)
- Engine Oil
- 2.6gal (US)
Standard Equipment:
-
- Cab, Rops, Sound Suppressed, Pressurized Includes:
-
- Digital service hour meter
- Gauges, Fuel Level and hydraulic oil temperature
- Ground level door releases
- Heater/Defroster with 11 vents
- Lockable toolbox
- Power sockets, auxiliary
- Radio antenna
- Right armrest
- Seatbelt, retractable
- Warning indicators, for major systems
- Wet wiper, front and rear
- Wiring for radio and rotary beacon
Optional Equipment:
-
- Cab, Comfort, Including:
-
- Fabric suspension seat
- Sliding window, left hand side
- Tilt steering wheel and turning ball
LR119 Landscape Rake
- Working Width
- 74.1 in
- Bucket Capacity - Struck
- 0.4 yd³
- Weight
- 1439.6 lb
LR116 Landscape Rake
- Working Width
- 62 in
- Bucket Capacity - Struck
- 0.4 yd³
- Weight
- 1311.7 lb
1148 mm (45 in) Tree Scoop Bucket
- Length
- 38.7 in
- Height
- 23.4 in
- Overall Width
- 45.2 in
1312 mm (52 in) Pallet Fork Carriage
- Height
- 20.4 in
- Width
- 51.7 in
- Weight
- 269 lb
1312 mm (52 in) Pallet Fork Carriage
- Height
- 19.4 in
- Width
- 51.7 in
- Weight
- 180.8 lb
1438 mm (57 in) Heavy Duty Fork Carriage
- Height
- 35.8 in
- Width
- 56.6 in
- Weight
- 319.7 lb
PC310 High Flow XPS Cold Planer
- Working Width
- 39.4 in
- Maximum Cutting Depth
- 5.1 in
- Required Hydraulics
- High Flow XPS
PC305 High Flow Cold Planer
- Working Width
- 17.7 in
- Maximum Cutting Depth
- 6.7 in
- Required Hydraulics
- High Flow
PC306 High Flow Cold Planer
- Working Width
- 23.6 in
- Maximum Cutting Depth
- 6.7 in
- Required Hydraulics
- High Flow
PC306 With Water High Flow Cold Planer
- Working Width
- 23.6 in
- Maximum Cutting Depth
- 6.7 in
- Required Hydraulics
- High Flow
PC104 Standard Flow Cold Planer
- Working Width
- 13.8 in
- Maximum Cutting Depth
- 5.9 in
- Required Hydraulics
- Standard Flow
PC105 Standard Flow Cold Planer
- Working Width
- 17.7 in
- Maximum Cutting Depth
- 5.9 in
- Required Hydraulics
- Standard Flow
BD118 Side Discharge Bucket With Sawdust Agitator
- Capacity
- 2 yd³
- Width
- 73.2 in
- Required Hydraulics
- Standard Flow
BD121 Side Discharge Bucket With Sawdust Agitator
- Capacity
- 2.3 yd³
- Width
- 85.2 in
- Required Hydraulics
- Standard Flow
BD121 Side Discharge Bucket With Sand Agitator
- Capacity
- 1.3 yd³
- Width
- 85.2 in
- Required Hydraulics
- Standard Flow
BD118 Side Discharge Bucket With Sand Agitator
- Capacity
- 1 yd³
- Width
- 73.2 in
- Required Hydraulics
- Standard Flow
MB250 Mixing Bucket
- Capacity
- 0.33 yd³
- Width
- 54.7 in
- Required Hydraulics
- Standard Flow
MB200 Mixing Bucket
- Capacity
- 0.26 yd³
- Width
- 54.6 in
- Required Hydraulics
- Standard Flow
1.6 m3 (2.0 yd3) ISO Coupler Light Material Bucket With Bolt-On Cutting Edge
- Width
- 81.9 in
- Weight
- 1148.6 lb
- Height
- 39.8 in
1.3 m3 (1.7 yd3) ISO Coupler Light Material Bucket With Bolt-On Cutting Edge
- Width
- 81.9 in
- Weight
- 1029.6 lb
- Height
- 38.4 in
1.6 m3 (2.0 yd3) Skid Steer Coupler Light Material Bucket With Bolt-On Cutting Edge
- Width
- 81.9 in
- Weight
- 1146.4 lb
- Height
- 40 in
2080 mm (82 in) Skid Steer Coupler Industrial Grapple Bucket With Bolt-On Cutting Edge
- Width
- 81.9 in
- Weight
- 1295 lb
- Height - Grapples Closed
- 41.5 in
1.3 m3 (1.7 yd3) Skid Steer Coupler Light Material Bucket With Bolt-On Cutting Edge
- Width
- 81.9 in
- Weight
- 1027.4 lb
- Height
- 38.4 in
1.4 m3 (1.8 yd3) ISO Coupler General Purpose Bucket With Bolt-On Cutting Edge
- Width
- 81.9 in
- Weight
- 1058.2 lb
- Height
- 38.8 in
1.4 m3 (1.8 yd3) ISO Coupler General Purpose Bucket With Bolt-On Teeth
- Width
- 81.1 in
- Weight
- 1000.9 lb
- Height
- 38.2 in
1.2 m3 (1.4 yd3) ISO Coupler General Purpose Bucket With Bolt-On Cutting Edge
- Width
- 81.9 in
- Weight
- 996.5 lb
- Height
- 37.6 in
1.2 m3 (1.5 yd3) ISO Coupler General Purpose Bucket With Bolt-On Teeth
- Width
- 81.1 in
- Weight
- 932.6 lb
- Height
- 37 in
1.1 m3 (1.4 yd3) ISO Coupler General Purpose Bucket With Bolt-On Teeth
- Width
- 80.2 in
- Weight
- 873 lb
- Height
- 36.2 in
1.2 m3 (1.5 yd3) Skid Steer Coupler General Purpose Bucket With Bolt-On Cutting Edge
- Width
- 81.9 in
- Weight
- 987.7 lb
- Height
- 37.6 in
1.2 m3 (1.5 yd3) ISO Coupler General Purpose Bucket With Bolt-On Cutting Edge
- Width
- 81.9 in
- Weight
- 989.9 lb
- Height
- 37.6 in
1.1 m3 (1.4 yd3) Skid Steer Coupler General Purpose Bucket With Bolt-On Cutting Edge
- Width
- 80.5 in
- Weight
- 917.1 lb
- Height
- 36.8 in
1.1 m3 (1.4 yd3) Skid Steer Coupler General Purpose Bucket With Bolt-On Teeth
- Width
- 80.2 in
- Weight
- 870.8 lb
- Height
- 36.2 in
1.0 m3 (1.3 yd3) General Purpose Bucket
- Width
- 81.1 in
- Weight
- 972.2 lb
- Height
- 40.6 in
1.0 m3 (1.3 yd3) ISO Coupler General Purpose Bucket With Bolt-On Teeth
- Width
- 74 in
- Weight
- 837.8 lb
- Height
- 36.2 in
1.0 m3 (1.3 yd3) Skid Steer Coupler General Purpose Bucket With Bolt-On Cutting Edge
- Width
- 74.4 in
- Weight
- 877.4 lb
- Height
- 36.8 in
1.0 m3 (1.3 yd3) ISO Coupler General Purpose Bucket With Bolt-On Cutting Edge
- Width
- 74.4 in
- Weight
- 879.6 lb
- Height
- 36.8 in
1.0 m3 (1.3 yd3) ISO Coupler General Purpose Bucket With Bolt-On Teeth
- Width
- 74 in
- Weight
- 831.1 lb
- Height
- 36.2 in
0.8 m3 (1.0 yd3) Skid Steer Coupler General Purpose Bucket With Bolt-On Cutting Edge
- Width
- 74.4 in
- Weight
- 822.3 lb
- Height
- 36.3 in
BU118 Utility Broom with Polypropylene Bristles
- Overall Width
- 83.3 in
- Sweeping Width
- 70.9 in
- Brush Diameter
- 26.2 in
BU118 Utility Broom
- Overall Width
- 83.3 in
- Sweeping Width
- 73.4 in
- Brush Diameter
- 26 in
BU115 Utility Broom with Polypropylene Bristles
- Overall Width
- 71.3 in
- Sweeping Width
- 59.1 in
- Brush Diameter
- 26.2 in
BU115 Utility Broom
- Overall Width
- 71.3 in
- Sweeping Width
- 59.4 in
- Brush Diameter
- 26 in
BP115C Pickup Broom
- Overall Width
- 78.3 in
- Sweeping Width
- 60 in
- Brush Diameter
- 26 in
BP118C Pickup Broom
- Overall Width
- 90.4 in
- Sweeping Width
- 72 in
- Brush Diameter
- 26 in
BA118C Manual Angle Broom
- Overall Width
- 104 in
- Sweeping Width
- 83 in
- Brush Diameter
- 32 in
BA118C Hydraulic Angle Broom
- Overall Width
- 104 in
- Sweeping Width
- 83 in
- Brush Diameter
- 32 in
2337 mm (92 in) Dozer Blade
- Blade Width
- 92 in
- Width - Fully Angled
- 80.7 in
- Maximum Blade Angle - Right/Left of Center
- 30 degrees
2007 mm (79 in) Dozer Blade
- Blade Width
- 79 in
- Width - Fully Angled
- 68.9 in
- Maximum Blade Angle - Right/Left of Center
- 30 degrees
1829 mm (72 in) Angle Blade
- Blade Width
- 72 in
- Width - Fully Angled
- 66.3 in
- Maximum Blade Angle - Right/Left of Center
- 30 degrees
2134 mm (84 in) Angle Blade
- Blade Width
- 84 in
- Width - Fully Angled
- 76.7 in
- Maximum Blade Angle - Right/Left of Center
- 30 degrees
1140 mm (45 in) Dual Tine Bale Spear
- Overall Width
- 55.4 in
- Overall Height
- 51.8 in
- Capacity
- 3007.1 lb
890 mm (35 in) Dual Tine Bale Spear
- Overall Width
- 55.4 in
- Overall Height
- 51.8 in
- Capacity
- 3007.1 lb
1140 mm (45 in) Single Tine Bale Spear
- Overall Width
- 50.6 in
- Overall Height
- 22.4 in
- Capacity
- 2004 lb
1803 mm (71 in) Bale Grab
- Overall Width
- 55.2 in
- Overall Height
- 34.4 in
- Maximum Opening Width
- 71 in
2133 mm (84 in) Bale Grab
- Overall Width
- 55.2 in
- Overall Height
- 34.4 in
- Maximum Opening Width
- 84 in
890 mm (35 in) Single Tine Bale Spear
- Overall Width
- 50.6 in
- Overall Height
- 22.4 in
- Capacity
- 2004 lb
A68 Auger
- Drive Shaft Torque at Maximum Pressure
- 5034.6 lb/ft
- Drive Method
- Gerotor Motor - Double Planetary Drive
- Mounting Bracket Design
- Skid Steer Loader Coupler
A41 Auger
- Drive Shaft Torque at Maximum Pressure
- 3037.3 lb/ft
- Drive Method
- Gerotor Motor - Single Planetary Reduction
- Mounting Bracket Design
- Skid Steer Loader Coupler
A23 Auger
- Drive Shaft Torque at Maximum Pressure
- 1699.3 lb/ft
- Drive Method
- Gerotor Motor - Direct Drive
- Mounting Bracket Design
- Skid Steer Loader Coupler
Skid Steer to Horizontal Pin Lock Adapter for Compact Wheel Loaders
- Weight
- 143.3 lb
- Width
- 12.8 in
- Overall Length
- 44.3 in
SG16 Stump Grinder
- Required Hydraulics
- Standard Flow
- Cutting Wheel Diameter - With Teeth
- 21.5 in
- Cutting Depth - Below Ground
- 20.5 in
3.66 m (12 ft) Straight Snow Push with rubber cutting edge
- Working Width
- 144 in
- Weight
- 952.4 lb
- Length
- 43.7 in
3.66 m (12 ft) Straight Snow Push with steel trip edge
- Working Width
- 144 in
- Weight
- 1402.1 lb
- Length
- 45 in
3.05 m (10 ft) Straight Snow Push with rubber cutting edge
- Working Width
- 120 in
- Weight
- 866.4 lb
- Length
- 43.7 in
3.66 m (12 ft) Straight Snow Push with rubber trip edge
- Working Width
- 144 in
- Weight
- 1347 lb
- Length
- 45 in
3.05 m (10 ft) Straight Snow Push with steel trip edge
- Working Width
- 120 in
- Weight
- 1201.5 lb
- Length
- 45 in
3.05 m (10 ft) Straight Snow Push with rubber trip edge
- Working Width
- 120 in
- Weight
- 1153 lb
- Length
- 45 in
2.44 m (8 ft) Straight Snow Push with rubber cutting edge
- Working Width
- 96 in
- Weight
- 778.2 lb
- Length
- 43.7 in
2.44 m (8 ft) Straight Snow Push with steel trip edge
- Working Width
- 96 in
- Weight
- 1082.5 lb
- Length
- 45 in
3.1 m (10 ft) Snow Wing
- Working Width (Wings Closed)
- 121.3 in
- Overall Width (Wings Closed)
- 128.1 in
- Overall Width (Wings Open)
- 195.9 in
3.7 m (12 ft) Snow Wing
- Working Width (Wings Closed)
- 145 in
- Overall Width (Wings Closed)
- 151.8 in
- Overall Width (Wings Open)
- 219.5 in
2.44 m (8 ft) Straight Snow Push with rubber trip edge
- Working Width
- 96 in
- Weight
- 1036.2 lb
- Length
- 45 in
2.4 m (8 ft) Snow Wing
- Working Width (Wings Closed)
- 96.5 in
- Overall Width (Wings Closed)
- 104.2 in
- Overall Width (Wings Open)
- 161.7 in
2.8 m (9 ft) Snow Wing
- Working Width (Wings Closed)
- 108.5 in
- Overall Width (Wings Closed)
- 116.2 in
- Overall Width (Wings Open)
- 173.7 in
3.0 m (10 ft) Snow Plow
- Width
- 119.9 in
- Angled Width
- 98.3 in
- Weight
- 1217 lb
2.7 m (9 ft) Snow Plow
- Width
- 108 in
- Angled Width
- 88.5 in
- Weight
- 1161.8 lb
1.8 m (6 ft) Snow Plow
- Width
- 71.9 in
- Angled Width
- 59 in
- Weight
- 992.1 lb
2.1 m (7 ft) Snow Plow
- Width
- 84 in
- Angled Width
- 68.8 in
- Weight
- 1051.6 lb
2.4 m (8 ft) Snow Plow
- Width
- 95.9 in
- Angled Width
- 78.6 in
- Weight
- 1106.7 lb
SR418 Snow Blower
- Intake Width
- 76.5 in
- Overall Width
- 85.9 in
- Weight
- 1016.3 lb
2134 mm (84 in) Multi V-Plow
- Straight Width
- 84 in
- Angled Width
- 73 in
- Interface Type
- Skid Steer Coupler
1524 mm (60 in) Multi V-Plow
- Straight Width
- 60 in
- Angled Width
- 53 in
- Interface Type
- Skid Steer Coupler
SW380, 250 mm (10 in) Wheel Saw
- Maximum Cutting Depth
- 31.5 in
- Wheel Width
- 9.8 in
- Weight
- 3196.7 lb
SW360, 200 mm (8 in) Wheel Saw
- Maximum Cutting Depth
- 23.6 in
- Wheel Width
- 7.9 in
- Weight
- 2921.1 lb
SW360, 80 mm (3 in) Wheel Saw
- Maximum Cutting Depth
- 23.6 in
- Wheel Width
- 3.1 in
- Weight
- 3174.7 lb
SW360, 130 mm (5 in) Wheel Saw
- Maximum Cutting Depth
- 23.6 in
- Wheel Width
- 5.1 in
- Weight
- 3009.3 lb
SW360, 100 mm (4 in) Wheel Saw
- Maximum Cutting Depth
- 23.6 in
- Wheel Width
- 3.9 in
- Weight
- 2943.2 lb
SW360, 160 mm (6 in) Wheel Saw
- Maximum Cutting Depth
- 23.6 in
- Wheel Width
- 6.3 in
- Weight
- 2899.1 lb
SW345, 80 mm (3 in) Wheel Saw
- Maximum Cutting Depth
- 17.7 in
- Wheel Width
- 3.1 in
- Weight
- 2482.4 lb
SW345, 130 mm (5 in) Wheel Saw
- Maximum Cutting Depth
- 17.7 in
- Wheel Width
- 5.1 in
- Weight
- 2239.9 lb
T315 High Flow Trencher with standard teeth
- Standard Boom Length
- 60 in
- Cutting Width
- 8 in
- Chain Type
- Standard
T315 High Flow Trencher with combo teeth
- Standard Boom Length
- 60 in
- Cutting Width
- 6 in
- Chain Type
- Standard
T315 High Flow Trencher with no chain
- Standard Boom Length
- 60 in
- Required Hydraulics
- High Flow XPS
- Overall Width
- 74.8 in
T112 Manual Trencher with standard teeth
- Standard Boom Length
- 48 in
- Cutting Width
- 6 in
- Chain Type
- Standard
T112 Manual Trencher with rockfrost teeth
- Standard Boom Length
- 48 in
- Cutting Width
- 6 in
- Chain Type
- Rockfrost
T315 High Flow Trencher with standard teeth
- Standard Boom Length
- 60 in
- Cutting Width
- 6 in
- Chain Type
- Standard
T112 Hydraulic Trencher with standard teeth
- Standard Boom Length
- 48 in
- Cutting Width
- 6 in
- Chain Type
- Standard
T112 Manual Trencher with combo teeth
- Standard Boom Length
- 48 in
- Cutting Width
- 6 in
- Chain Type
- Combo
T112 Manual Trencher with no chain
- Standard Boom Length
- 48 in
- Required Hydraulics
- Standard Flow
- Overall Width
- 74.8 in
T112 Hydraulic Trencher with rockfrost teeth
- Standard Boom Length
- 48 in
- Cutting Width
- 6 in
- Chain Type
- Rockfrost
T112 Hydraulic Trencher with combo teeth
- Standard Boom Length
- 48 in
- Cutting Width
- 6 in
- Chain Type
- Combo
T112 Hydraulic Trencher with no chain
- Standard Boom Length
- 48 in
- Required Hydraulics
- Standard Flow
- Overall Width
- 74.8 in
T109 Manual Trencher with standard teeth
- Standard Boom Length
- 36 in
- Cutting Width
- 8 in
- Chain Type
- Standard
T112 Hydraulic Trencher with standard teeth
- Standard Boom Length
- 48 in
- Cutting Width
- 8 in
- Chain Type
- Standard
T109 Manual Trencher with no chain
- Standard Boom Length
- 36 in
- Required Hydraulics
- Standard Flow
- Overall Width
- 56.1 in
T109 Manual Trencher with terminator teeth
- Standard Boom Length
- 36 in
- Cutting Width
- 6 in
- Chain Type
- Terminator
T109 Manual Trencher with rockfrost teeth
- Standard Boom Length
- 36 in
- Cutting Width
- 6 in
- Chain Type
- Rockfrost
T109 Manual Trencher with standard teeth
- Standard Boom Length
- 36 in
- Cutting Width
- 6 in
- Chain Type
- Standard
T109 Hydraulic Trencher with standard teeth
- Standard Boom Length
- 36 in
- Cutting Width
- 6 in
- Chain Type
- Standard
T109 Manual Trencher with combo teeth
- Standard Boom Length
- 36 in
- Cutting Width
- 6 in
- Chain Type
- Combo
T109 Hydraulic Trencher with no chain
- Standard Boom Length
- 36 in
- Required Hydraulics
- Standard Flow
- Overall Width
- 56.1 in
T109 Hydraulic Trencher with combo teeth
- Standard Boom Length
- 36 in
- Cutting Width
- 6 in
- Chain Type
- Combo
T109 Hydraulic Trencher with rockfrost teeth
- Standard Boom Length
- 36 in
- Cutting Width
- 6 in
- Chain Type
- Rockfrost
T109 Hydraulic Trencher with standard teeth
- Standard Boom Length
- 36 in
- Cutting Width
- 8 in
- Chain Type
- Standard
T109 Hydraulic Trencher with terminator teeth
- Standard Boom Length
- 36 in
- Cutting Width
- 6 in
- Chain Type
- Terminator
LT114 Landscape Tiller
- Working Width
- 53.3 in
- Working Depth
- 25-152 mm (1-6 in)
- Weight
- 925.9 lb
LT118 Landscape Tiller
- Working Width
- 72.8 in
- Working Depth
- 25-152 mm (1-6 in)
- Weight
- 925.9 lb