fbpx

6030 Hydraulic Shovel

The Cat® 6030 Hydraulic Mining Shovel is owned by more customers than any other product in the Cat portfolio — and for good reason. It provides the most powerful engine output in its class, along with the mobility and flexibility you need from a 300-tonne machine, to deliver the productivity you expect, with the reliability you demand.

The 6030 offers a standard bucket capacity of 17 m3 (22.2 yd3) in backhoe configuration, and 16.5 m3 (21.5 yd3) in face shovel (FS) configuration with the unique Cat TriPower™ system. The 6030 is ideal to load Cat 777 to 793 mining trucks.

But we’re always looking for ways to make the 6030 better. The only shovel in its size class offered with dual engines, it’s available with a Tier 4 Final engine solution that eliminates the need for Diesel Exhaust Fluid (DEF), saving time and cost during maintenance.

Engine Output - SAE J1995
1649 HP
Bucket Payload
33 ton (US)
Operating Weight
324 ton (US)
Note
Specifications shown above apply to the highly regulated Face Shovel configuration. Backhoe and Frontless configurations are also available for all regions.

General

Engine Output - SAE J1995
1649HP
Bucket Payload
33ton (US)
Operating Weight
324ton (US)
Note
Specifications shown above apply to the highly regulated Face Shovel configuration. Backhoe and Frontless configurations are also available for all regions.

Diesel Engine - Highly Regulated

Gross Power - SAE J1995
1649HP
Net Power - ISO 9249
1625HP
Net Power - SAE J1349
1541HP
Emissions
Meets U.S. EPA Tier 4 Final and EU Stage V emission standards

Diesel Engine - Lesser Regulated

Gross Power - SAE J1995
1531HP
Net Power - SAE J1349
1425HP
Net Power - ISO 9249
1511HP
Emissions
Meets China Nonroad Stage III emission standards, equivalent to U.S. EPA Tier 2

Diesel Engines

Number of Cylinders - Each Engine
12
Bore
5.42in
Stroke
6in
Displacement
1648in³
Aspiration
Turbocharged and air-to-air aftercooled
Components (1)
Hydraulically driven radiator fan with electronically controlled fan speed
Components (2)
Micro processed engine management
Components (3)
Heavy-duty air filters
Components (4)
Two-stage fuel filter, including water separator
Components (5)
Additional high-capacity water separator
Emissions
Meets U.S. EPA Tier 4 Final and EU Stage V emission standards
Fuel Tank Capacity
1342gal (US)

Electrical System - Diesel Drive

System Voltage
24V
Batteries in Series/Parallel Installation
4 x 210 Ah at 12V each; 420 Ah with 24V in total
Components (1)
Battery isolation relays
Components (2)
Emergency stop switches accessible from ground level and in engine module
Components (3)
14 LED high-brightness working flood lights
Components (4)
11 LED service lights

Electrical System

Batteries
4 maintenance-free batteries

Operating Weights

6030 FS - Standard Track Pads
3.25ft
6030 FS - Operating Weight
657640lb
6030 FS - Ground Pressure
32.2psi
6030 - Standard Track Pads
3.25ft
6030 - Operating Weight
660060lb
6030 - Ground Pressure
32.3psi
Note
Other track pads available on request. Operating weights include: base machine, front attachment, standard track pads, standard rock bucket, and 100% fuel and lubricants.

Hydraulic System with Pump Managing System

Hydraulic Tank Capacity - Approximately
707gal (US)
Total Volume of Hydraulic Oil - Approximately
925gal (US)
Main Pumps
4 x variable swash plate pumps
Main Pumps - Maximum Oil Flow - Diesel Version
4 x 552 L/min (4 x 146 gal/min)
Maximum Pressure - Attachment
4495psi
Maximum Pressure - Travel
5220psi
Swing Pumps
2 x reversible swash plate double pumps
Swing Pumps - Maximum Oil Flow - Diesel Version
4 x 197 L/min (4 x 52 gal/min)
Maximum Pressure - Swing Pumps
5076psi

Hydraulic Oil Cooling

Oil Flow of Cooling Pumps - Diesel Version
2 x 467 L/min (2 x 123 gal/min)
Diameter - Fan
48in

Swing System

Swing Drive
2 compact planetary transmissions with axial piston motors
Parking Brakes
Wet multiple-disc brake, spring-loaded/hydraulically released
Maximum Swing Speed - Diesel Version
4.6r/min
Swing Ring
Triple-race roller bearing with sealed internal gearing
Maximum Swing Speed - AC Version
5r/min

Undercarriage

Travel Speed - 1st Stage - Maximum
0.87mile/h
Travel Speed - 2nd Stage - Maximum
1.68mile/h
Maximum Tractive Force
360144ft·lbf
Gradeability - Travel Drives - Approximate
47%
Track Pads - Each Side
44
Bottom Rollers - Each Side
7
Support Rollers - Each Side
2 plus a skid plate in between
Travel Drives - Each Side
1 planetary transmission with 2 two-stage axial piston motors
Parking Brakes
Wet multiple disc brake, spring loaded/hydraulically released
Components (1)
All running surfaces of sprockets, idlers, rollers and pad links, as well as teeth contact areas of sprocket and pad links, are hardened
Components (2)
Cast double-grouser combined pad-links with bushings connected by hardened full floating pins
Components (3)
Fully hydraulic self-adjusting track tensioning system with membrane accumulator
Components (4)
Automatic hydraulic retarder valve to prevent over-speed on downhill travel
Components (5)
Acoustic travel alarm

Operator's Cab

Operator's Eye Level - Approximately
21.33ft
Internal Dimensions of Cab - Length
7.22ft
Internal Dimensions of Cab - Width
5.25ft
Internal Dimensions of Cab - Height
7.05ft
Components (1)
Under roof mounted heating ventilating and air conditioning system
Components (2)
External sun shields at side and rear windows
Components (3)
Robust instrument panel including large colored BCS screen with transflective technology
Components (4)
Board Control System (BCS) electronic monitoring and data logging system for vital signs and service data of engines, hydraulic system and lubrication system
Components (5)
Hydraulically operated 45 degree access stairway
Components (6)
Emergency egress ladder with ladder cage
Components (7)
Switch in seat cushion to automatically neutralize the hydraulic controls when operator leaves the seat
Components (8)
Pneumatically cushioned and multi-adjustable comfort seat with lumbar support, seat heating, safety belt, head- and armrests
Components (9)
Roller blinds at all windows
Components (10)
Windshield with parallel intermittent wiper/washer
Components (11)
All-round safety glass, armored windshield and sliding side window
Components (12)
Operator Protective Guards (ISO 10262:1998 Level II
Components (13)
Joystick controls integrated in independently adjustable seat consoles
Components (14)
Fold-away auxiliary seat with safety belt

Automatic Lubrication System

Capacity - Grease Container
119gal (US)
Type (1)
Dual-circuit system with hydraulically driven heavy-duty pump and electronic time relay control to adjust the pause/lube times
Type (2)
Connected to the lubrication system are the swing roller bearing with internal gearing and all pivot points of attachment, bucket and cylinders
Type (3)
Lubricated pinion for greasing of internal gearing of swing ring
Type (4)
System failures displayed by Board Control System
Type (5)
Grease filters between service station and container as well as directly behind grease pump

Bucket

Bucket Capacity - Face Shovel (heaped 2:1)
21.6yd³
Bucket Capacity - Backhoe (heaped 1:1)
22.2yd³

Digging Forces

Maximum Crowd Force
291700ft·lbf
Maximum Tearout Force
212150ft·lbf

Attachments

Shovel attachment with unique TriPower kinematics ensuring the following main features: (1)
Automatic roll-back limiter to prevent material spillage and kinematic assistance to hydraulic forces
Shovel attachment with unique TriPower kinematics ensuring the following main features: (2)
Horizontal automatic constant-angle bucket guidance and vertical automatic constant-angle bucket guidance
Shovel attachment with unique TriPower kinematics ensuring the following main features: (3)
Constant boom momentum throughout the whole lift arc and crowd force assistance
All buckets (FS and BH) are equipped with a wear package consisting of: (1)
Special liner material covering main wear areas inside and outside of bucket and lip shrouds between teeth
All buckets (FS and BH) are equipped with a wear package consisting of: (2)
Wing shrouds on side walls and heel shrouds at bottom edges
Type (1)
Catwalks with rails at booms
Type (2)
Special wear packages for highly abrasive materials on request
Type (3)
Pressure-free lowering of boom (FS and BH) and stick (FS) by means of a float valve
Type (4)
Welding procedures allow for internal counter-welding (double prep weld) wherever possible
Type (5)
Booms and sticks are stress-relieved after welding
Type (6)
Booms and sticks are torsion-resistant, welded box design of high-tensile steel with solid steel castings at pivot areas

Standard Equipment:

  • 2 x Cat C27 engines
  • Aftertreatment system (used in Tier 4 Final only): -Diesel Oxidation Catalyst (DOC) -NOx Reduction System (NRS) -Non-DEF solution
  • Cat Powertrain
    • Air-to-Air After Cooling (ATAAC)
    • Turbocharger
    • Hydraulically driven radiator fan
    • Electronically controlled fan speed
    • Micro processed engine management
    • Cat CEM air filters
    • Two-stage fuel filter with series filtration
    • High-capacity water seperator
    • Starting aid -- automatic ether
    • Exhaust manifold and turbo heat shields
    • 24 V electric starter
    • Automatic engine idle shut down
    • Automatic fuel priming
  • Hydraulics
    • Pump managing system with: -- Electronic load limit control -- Flow on demand -- Automatic zero flow regulation -- Automatic engine RPM reduction -- Reduced oil flow at high hydraulic oil or engine temperature
    • Pressure cut - off for main pumps
    • Cat Hydraulic Hose assemblies
    • Cooling of pump transmission gear oil
    • Continuous hydraulic oil filtration
    • Close loop swing circuit
    • Pressure testing poings
    • Full-flow high-pressure filters (100 μm), main pumps
    • High pressure filters (100 μm), closed swing circuit
    • Full-flow filters (10 μm), return circuit
    • Full-flow filters (10 μm), cooling return circuit
    • Pressure filters (40 μm and 6 μm), servo circuit
    • Transmission oil filters (40 μm)
    • Boom float values (FS and BH)
    • Stick float values (FS)
  • Electrical System
    • Four maintenance-free batteries
    • Lockable battery isolator switch
    • Lockable starter isolator switch
    • 14 LED high-brightness working flood lights
    • 11 LED service lights
    • 2 acoustic travel alarms -forward and reverse (counterweight, oil cooler)
    • 2 electric horns (1 cab module, 1 oil cooler module)
  • Undercarriage
    • HD tracks with cast double-grouser track pads
    • 1000 mm (3 ft 3 in) wide track pads
    • HD fixed axle carrier and load rollers
    • HD fixed axle idlers
    • Automatic hydraulic retarder valve
    • Hinged travel motor covers
    • Hardened running surfaces of sprockets, idlers, rollers, pad links, teeth contact areas
    • Fully hydraulic self-adjusting track tensioning system with piston accumulators
  • Automatic Lubrication System
    • Lubricated pinion in swing ring
    • Grease filters (200 μm)
  • Operator Environment
    • Single HVAC system
    • Pneumatically cushioned and multiadjustable comfort seat with: -Seat heating -Lumbar support -2-point safety belt -Head and arm rests -Safety switch for automatic motion shutdown
    • Independently adjustable seat consoles with integrated joysticks
    • Electronic-Hydraulic Servo Control
    • FM/AM radio with USB and AUX input
    • Fold-away auxiliary seat with 2-point safety belt
    • Sliding side window
    • Parallel intermittent wiper/washer
    • Roller blinds at all windows
    • External sun shields at side and rear windows
    • Cat Board Control system: -305 mm (12 in) color touchscreen -On-screen documentation in .pdf -On-screen troubleshooting assistance -On-screen graphic charts of logged data -Fault memory of related conditions -USB, LAN (TCP/IP) and CAN BUS interfaces for data export
    • Control and Monitoring Platform (CAMP)
    • 45° stairway from engine bay to operator cab
    • Powered 45° access stairway
    • 2 mirrors on LH side, 1 heated
    • Level indicators for length and crosswise inclination
    • Document storage
  • Front Attachment
    • Service access holes in boom and stick (FS and BH)
    • Boom and stick thermally stress relieved after welding
    • Catwalks with rails at boom (FS and BH)
    • Wear Package (as per bucket selection)
  • Cat Technology
    • Cat Product Link Elite (Cellular)
    • Cat MineStar Solutions Ready
  • Service And Maintenance
    • Engine oil exchange interval -- 500 hours
    • Hydraulic oil change interval -10,000 hours
    • S·O·SSM sampling ports
    • Cat CEM air filters with precleaner dust ejection system
    • Retractable ground level service station with quick couplings for: -Diesel fuel -Engine coolant -left/right engines -Pump transmission gear oil -left/right engines -Engine oil -left/right engines -Hydraulic oil -Grease -Engine oil extension tanks
    • Cat battery charging connector
    • Indicator lights
    • Cat Electronic Technician service port
  • Safety And Security
    • Emergency stop switches: 1 in cab, 3 in engine module, 1 pull rope accessible from ground level and 1 on service station
    • Operator Protective Guard (Top Guard)
    • All-around safety glass
    • Armored windshield
    • Emergency egress ladder
  • Miscellaneous
    • ISO or ANSI decals

Optional Equipment:

  • General
    • Export crating
    • Custom paint
  • Superstructure
    • New C27 engines meet U.S. EPA Tier 4 Final and EU Stage V emission standards.
    • Oil change interval extension for engine oil up to 1,000 hours
    • Round container for a standard 200 L (53 gal) grease barrel (instead of 450 L (119 gal) square grease container)
    • Cold-weather package (400 V, 50 Hz or 208 V, 60 Hz)
  • Cab
    • Cab heating
    • Dual (redundancy) HVAC system
    • Camera monitoring system
    • Operator Protective Guard (Front Guard)
  • Undercarriage
    • Track pad width 800 mm (2 ft 7 in) or 1200 mm (3 ft 11 in)
    • Undercarriage guard (belly plate)

Specifications

Standard/Optional Features