Caterpillar is leading the power generation marketplace with Power Solutions engineered to deliver unmatched flexibility, expandability, reliability, and cost-effectiveness.
|
|
|
|
Generator Set Specifications
- Prime Power Rating
- 2,275/2,000 kVA
- Continuous Rating
- 2,000/1,750 kVA
- Emissions/Fuel Strategy
- Low Fuel Consumption
- Voltage
- 380 to 11,000 Volts
- Frequency
- 50 Hz
- Speed
- 1,500 rpm
- Duty Cycle
- Prime, Continuous
- Maximum Rating
- 2,275 kVA
- Minimum Rating
- 1,750 kVA
Engine Specifications
- Engine Model
- 3,516B TA, V-16, 4-Stroke Water-Cooled Diesel
- Bore
- 6.69 in
- Stroke
- 7.48 in
- Stroke - HD
- 8.46 in
- Displacement
- 4,210.64 in
- Displacement - HD
- 4,764.73 in³
- Compression Ratio
- 14.0:1 Std 15.5:1 HD
- Aspiration
- TA
- Fuel System
- Electronic unit injection
- Governor Type
- Adem™4
Generator Set Dimensions
- Length - Minimum
- 278.2 in
- Length - Maximum
- 292 in
- Width - Maximum
- 90 in
- Height - Maximum
- 92.9 in
- Dry Weight - Genset (minimum)
- 33,300 lb
- Dry Weight - Genset (maximum)
- 36,280 lb
Standard Equipment:
-
- Air Inlet System
-
- Air cleaner, single element canister type
-
- Control System
-
- Low oil pressure
- Over/under frequency (81 o/u)
- Alarm acknowledge
- Oil pressure (psi, kPa or bar)
- Reverse reactive power (kVAr) (32RV)
- 3 Analog inputs
- Programmable protective relaying functions:
- 4 Programmable relay outputs (Form A)
- Overspeed
- Reverse power (kW) (32)
- Customer data link (Modbus RTU)
- Text alarm/event descriptions
- Low coolant temperature
- Number of I/O varies on options selected
- Emergency stop
- Operating hours
- Limiter and exciter diode monitor
- Environmental sealed front face
- kW (per phase, average & percent)
- Digital indication for:
- Auto/start/stop control
- Cat connect
- Low coolant level
- Controls:
- Serial annunciator module data link
- Regulator (IVR) - IVR includes reactive droop capability, 3-phase voltage sensing, KVAR/PF modes, RFI suppression, min/max exciter
- RPM
- Volts (L-L & L-N), frequency (Hz)
- Coolant temperature
- 1 Programmable digital outputs
- Speed adjust
- Engine cycle crank
- Over/under voltage (27/59)
- kW-hr (total)
- 6 Customer programmable digital inputs
- Generator phase sequence
- 1 Programmable relay outputs (Form C)
- PLC functionality
- kVAr-hr (total)
- DC volts
- Engine cool-down timer
- 24 Volt DC operation
- Generator mounted - rear facing
- High coolant temperature
- Amps (per phase & average)
- Load histogram feature
- Emergency stop pushbutton
- Warning/shutdown with common LED indication of shutdowns for:
- kVAr (per phase, average & percent)
- Customizable screens
- True RMS AC metering, 3-phase, +/-2% accuracy
- Overcurrent (50/51)
- Communications:
- kVA (per phase, average & percent)
- Power factor (per phase & average)
- Failure to start (overcrank)
- Accessory module data link
- Lamp test
- Generator set packages include Caterpillars voltage regulator
-
- Exhaust
-
- Exhaust flange outlet
-
- Fuel
-
- Primary fuel filter with integral water separator
-
- Generator
-
- IP23 Protection
-
- Power Termination
-
- Busbar
-
- Control Panel
-
- Cat ECS Genset controller
-
- Cooling System
-
- Package mounted radiator
-
- Exhaust System
-
- Dry exhaust manifold
- Flanged faced outlet(s)
-
- Fuel System
-
- Fuel priming pump
- Fuel cooler; not included with packages without radiator
- Flexible fuel lines - shipped loose
- Secondary fuel filters
-
- General
-
- SAE standard rotation
- Paint - Caterpillar yellow except rails and radiators gloss black
- RH service
- Flywheel and Flywheel housing-SAE No. 00
-
- Generators And Attachments
-
- Matched to the performance and output characteristics of Cat engines
- Random wound
- Busbar connections, right side extension box, bottom cable entry - 60 Hz models: NEMA standard hole pattern
- Permanent magnet excitation (PMG)
- LV
- HV:
- MV:
- 6 Lead
- Winding temperature detectors
- NEMA Class H insulation system, Class H temperature rise at 40C ambient (125C prime / 150C standby) - 60 Hz models: NEMA standard hole pattern
- Class H insulation, Class F temperature rise at 40C ambient (105C prime / 130C standby)
- 3 Phase brushless, Salient pole
- Anti-condensation space heater
- NEMA Class H insulation system, Class H temperature rise at 40C ambient (125C prime / 150C standby)
- Form wound
-
- Governing System
-
- ADEM A3
-
- Lube System
-
- Gear type lube oil pump
- Oil filter, filler and dipstick
- Oil drain lines and valve
- Integral lube Oil cooler
- Lubricating oil
- Fumes disposal
-
- Mounting System
-
- Rails - Engine/generator/radiator mounting
- Rubber anti-vibration mounts - shipped loose
- Anti-vibration mounts (shipped loose)
-
- Starting System
-
- 45 Amp Charging alternator
- 24 Volt electric starting motor
- Battery disconnect switch
- Battery and battery rack w/cables
Optional Equipment:
-
- Exhaust
-
- Exhaust mufflers
-
- Air Inlet System
-
- Dual element air cleaner
- Standard ambient radiators
- Single element filter
- Standard ambient ATAAC radiators
- Optional radiator arrangements
-
- Generator
-
- Permanent magnet excitation (PMG)
- Oversize and premium generators
- Internal excitation (IE)
- Anti-condensation heater
-
- Control Panels
-
- Load share module
- Empty upper box
- Generator main terminal box
- Annunciator - remote
- EMCP 4.4
- Digital I/O module
- Cable Shroud
- Remote monitoring software
- Vandal proof panel cover
- Side extension box
- Generator temperature monitoring & protection
- Annunciator - local
-
- Cooling System
-
- Water level switch gauges
- Coolant
-
- Mounting
-
- IBC isolators
- Spring type vibration isolators
-
- Crankcase Systems
-
- No explosion relief valves
- Explosion relief valves
- Crankcase ventilation systems
- Crankcase protection groups:
-
- Exhaust System
-
- Tier 4 dosing cabinet
- Y Adapters
- Flanges
- Flange and exhaust expanders
- Elbows>
- Mufflers
- Tier 4 lean emissions moDual
- Clean emission parts
- Flexible fittings
- Tier 4 clean emission MOD kits
- Exhaust offset
-
- Starting/charging
-
- Charging alternator
- Battery chargers
- Oversize batteries
- Heavy duty starting system
- Jacket water heater
- Air starting motor with control and silencer
-
- Extended Service Coverage
-
- Platinum, Silver and Gold coverage
-
- General
-
- The following options are based on regional and product configuration:
- UL 2200 package
- EEC Declaration of Conformity
- CSA Certification
- Enclosures: Sound attenuated, weather protective
- EU Certificate of Conformance (CE)
- Seismic Certification per applicable building codes: IBC 2000, IBC 2003, IBC 2006, IBC 2009, CBC 2007
- Integral & sub-base UL listed dual wall fuel tanks
- Automatic transfer switches (ATS)
- Integral & sub-base fuel tanks
-
- Fuel System
-
- Gas fuel filter
- Primary fuel filter
- Fuel priming pumps (Tier 4)
-
- Generators And Attachments
-
- 1600 Frame - 380, 400, 415 Volts, 3 Phase 1500 rpm ,FW, PM, No. of leads = 6, Pitch = .6667
- Hi voltage optional attachments
- Differential current transformers
- 1600 Frame - 380, 400, 415 Volts, 3 Phase 1500 rpm, RW, PM, No. of leads = 6, Pitch = .6667
- Generators high voltage
- Space heater kit
- Generator conversions
- 1600 Frame - 380, 400, 415 Volts, 3 Phase 1500 rpm, RW, IE, No. of leads = 6, Pitch = .6667
- 2700 Frame - 6300, 6600, 6900 Volts, 3 Phase 1500 rpm, FW, PM, No. of leads = 6, Pitch = .6667
- 3000 Frame - 10000, 10500, 11000 Volts, 3 Phase 1500 rpm, FW, PM, No. of leads = 6, Pitch = .6667
- 1800 Frame
- Alternator air cleaner
-
- Instrumentation
-
- Pyrometer and termocouples
-
- Lube System
-
- Prelube pump groups
- Oil level regulator
- Lube oil in standard sump
-
- Mounting System
-
- IBC vibration isolators
- Puck style low efficiency isolators
- Spring type vibration isolators
-
- Power Connections
-
- Cable entry - right side
- Cable entry - rear
- Grounding groups
- left side power connections
- Neutral ground connections
- Center post busbars
- Right side power connections
- Cable entry - left side
- Rear power connections
-
- Power Termination
-
- Circuit breakers - LV packages
- Circuit breakers, UL listed
- 2000, 2500, 3200 Amp, 3 Pole, IEC rated Circuit breakers
- Circuit breakers, IEC compliant
- 2000, 2500, 3200 Amp, 4 Pole, IEC rated Circuit breakers
- 1600, 2000, 2500, 3000 and 4000 Amp, 3 Pole, UL-100% rated Circuit breakers
-
- Special Tests / Reports
-
- Standard engine test
- Torsional vibration analysis
- Fuel consumption test
- PGS Test report @ 1.0 power factor
- OSPD Certification
- PGS Test report @ 0.8 power factor
- Generator set report
-
- Starting / Charging
-
- Engine barring device
- Electric starting motors
- Jacket water heaters
- Starter cover
- Batteries, racks and cables
- Air pressure regulator
- 10, 20, 35 Amp Battery chargers
- 50 Amp NFPA battery charger
- Air starting motors
Specifications
Generator Set Specifications
- Prime Power Rating
- 2,275/2,000 kVA
- Continuous Rating
- 2,000/1,750 kVA
- Emissions/Fuel Strategy
- Low Fuel Consumption
- Voltage
- 380 to 11,000 Volts
- Frequency
- 50 Hz
- Speed
- 1,500 rpm
- Duty Cycle
- Prime, Continuous
- Maximum Rating
- 2,275 kVA
- Minimum Rating
- 1,750 kVA
Engine Specifications
- Engine Model
- 3,516B TA, V-16, 4-Stroke Water-Cooled Diesel
- Bore
- 6.69 in
- Stroke
- 7.48 in
- Stroke - HD
- 8.46 in
- Displacement
- 4,210.64 in
- Displacement - HD
- 4,764.73 in³
- Compression Ratio
- 14.0:1 Std 15.5:1 HD
- Aspiration
- TA
- Fuel System
- Electronic unit injection
- Governor Type
- Adem™4
Generator Set Dimensions
- Length - Minimum
- 278.2 in
- Length - Maximum
- 292 in
- Width - Maximum
- 90 in
- Height - Maximum
- 92.9 in
- Dry Weight - Genset (minimum)
- 33,300 lb
- Dry Weight - Genset (maximum)
- 36,280 lb
Standard/Optional Features
Standard Equipment:
-
- Air Inlet System
-
- Air cleaner, single element canister type
-
- Control System
-
- Low oil pressure
- Over/under frequency (81 o/u)
- Alarm acknowledge
- Oil pressure (psi, kPa or bar)
- Reverse reactive power (kVAr) (32RV)
- 3 Analog inputs
- Programmable protective relaying functions:
- 4 Programmable relay outputs (Form A)
- Overspeed
- Reverse power (kW) (32)
- Customer data link (Modbus RTU)
- Text alarm/event descriptions
- Low coolant temperature
- Number of I/O varies on options selected
- Emergency stop
- Operating hours
- Limiter and exciter diode monitor
- Environmental sealed front face
- kW (per phase, average & percent)
- Digital indication for:
- Auto/start/stop control
- Cat connect
- Low coolant level
- Controls:
- Serial annunciator module data link
- Regulator (IVR) - IVR includes reactive droop capability, 3-phase voltage sensing, KVAR/PF modes, RFI suppression, min/max exciter
- RPM
- Volts (L-L & L-N), frequency (Hz)
- Coolant temperature
- 1 Programmable digital outputs
- Speed adjust
- Engine cycle crank
- Over/under voltage (27/59)
- kW-hr (total)
- 6 Customer programmable digital inputs
- Generator phase sequence
- 1 Programmable relay outputs (Form C)
- PLC functionality
- kVAr-hr (total)
- DC volts
- Engine cool-down timer
- 24 Volt DC operation
- Generator mounted - rear facing
- High coolant temperature
- Amps (per phase & average)
- Load histogram feature
- Emergency stop pushbutton
- Warning/shutdown with common LED indication of shutdowns for:
- kVAr (per phase, average & percent)
- Customizable screens
- True RMS AC metering, 3-phase, +/-2% accuracy
- Overcurrent (50/51)
- Communications:
- kVA (per phase, average & percent)
- Power factor (per phase & average)
- Failure to start (overcrank)
- Accessory module data link
- Lamp test
- Generator set packages include Caterpillars voltage regulator
-
- Exhaust
-
- Exhaust flange outlet
-
- Fuel
-
- Primary fuel filter with integral water separator
-
- Generator
-
- IP23 Protection
-
- Power Termination
-
- Busbar
-
- Control Panel
-
- Cat ECS Genset controller
-
- Cooling System
-
- Package mounted radiator
-
- Exhaust System
-
- Dry exhaust manifold
- Flanged faced outlet(s)
-
- Fuel System
-
- Fuel priming pump
- Fuel cooler; not included with packages without radiator
- Flexible fuel lines - shipped loose
- Secondary fuel filters
-
- General
-
- SAE standard rotation
- Paint - Caterpillar yellow except rails and radiators gloss black
- RH service
- Flywheel and Flywheel housing-SAE No. 00
-
- Generators And Attachments
-
- Matched to the performance and output characteristics of Cat engines
- Random wound
- Busbar connections, right side extension box, bottom cable entry - 60 Hz models: NEMA standard hole pattern
- Permanent magnet excitation (PMG)
- LV
- HV:
- MV:
- 6 Lead
- Winding temperature detectors
- NEMA Class H insulation system, Class H temperature rise at 40C ambient (125C prime / 150C standby) - 60 Hz models: NEMA standard hole pattern
- Class H insulation, Class F temperature rise at 40C ambient (105C prime / 130C standby)
- 3 Phase brushless, Salient pole
- Anti-condensation space heater
- NEMA Class H insulation system, Class H temperature rise at 40C ambient (125C prime / 150C standby)
- Form wound
-
- Governing System
-
- ADEM A3
-
- Lube System
-
- Gear type lube oil pump
- Oil filter, filler and dipstick
- Oil drain lines and valve
- Integral lube Oil cooler
- Lubricating oil
- Fumes disposal
-
- Mounting System
-
- Rails - Engine/generator/radiator mounting
- Rubber anti-vibration mounts - shipped loose
- Anti-vibration mounts (shipped loose)
-
- Starting System
-
- 45 Amp Charging alternator
- 24 Volt electric starting motor
- Battery disconnect switch
- Battery and battery rack w/cables
Optional Equipment:
-
- Exhaust
-
- Exhaust mufflers
-
- Air Inlet System
-
- Dual element air cleaner
- Standard ambient radiators
- Single element filter
- Standard ambient ATAAC radiators
- Optional radiator arrangements
-
- Generator
-
- Permanent magnet excitation (PMG)
- Oversize and premium generators
- Internal excitation (IE)
- Anti-condensation heater
-
- Control Panels
-
- Load share module
- Empty upper box
- Generator main terminal box
- Annunciator - remote
- EMCP 4.4
- Digital I/O module
- Cable Shroud
- Remote monitoring software
- Vandal proof panel cover
- Side extension box
- Generator temperature monitoring & protection
- Annunciator - local
-
- Cooling System
-
- Water level switch gauges
- Coolant
-
- Mounting
-
- IBC isolators
- Spring type vibration isolators
-
- Crankcase Systems
-
- No explosion relief valves
- Explosion relief valves
- Crankcase ventilation systems
- Crankcase protection groups:
-
- Exhaust System
-
- Tier 4 dosing cabinet
- Y Adapters
- Flanges
- Flange and exhaust expanders
- Elbows>
- Mufflers
- Tier 4 lean emissions moDual
- Clean emission parts
- Flexible fittings
- Tier 4 clean emission MOD kits
- Exhaust offset
-
- Starting/charging
-
- Charging alternator
- Battery chargers
- Oversize batteries
- Heavy duty starting system
- Jacket water heater
- Air starting motor with control and silencer
-
- Extended Service Coverage
-
- Platinum, Silver and Gold coverage
-
- General
-
- The following options are based on regional and product configuration:
- UL 2200 package
- EEC Declaration of Conformity
- CSA Certification
- Enclosures: Sound attenuated, weather protective
- EU Certificate of Conformance (CE)
- Seismic Certification per applicable building codes: IBC 2000, IBC 2003, IBC 2006, IBC 2009, CBC 2007
- Integral & sub-base UL listed dual wall fuel tanks
- Automatic transfer switches (ATS)
- Integral & sub-base fuel tanks
-
- Fuel System
-
- Gas fuel filter
- Primary fuel filter
- Fuel priming pumps (Tier 4)
-
- Generators And Attachments
-
- 1600 Frame - 380, 400, 415 Volts, 3 Phase 1500 rpm ,FW, PM, No. of leads = 6, Pitch = .6667
- Hi voltage optional attachments
- Differential current transformers
- 1600 Frame - 380, 400, 415 Volts, 3 Phase 1500 rpm, RW, PM, No. of leads = 6, Pitch = .6667
- Generators high voltage
- Space heater kit
- Generator conversions
- 1600 Frame - 380, 400, 415 Volts, 3 Phase 1500 rpm, RW, IE, No. of leads = 6, Pitch = .6667
- 2700 Frame - 6300, 6600, 6900 Volts, 3 Phase 1500 rpm, FW, PM, No. of leads = 6, Pitch = .6667
- 3000 Frame - 10000, 10500, 11000 Volts, 3 Phase 1500 rpm, FW, PM, No. of leads = 6, Pitch = .6667
- 1800 Frame
- Alternator air cleaner
-
- Instrumentation
-
- Pyrometer and termocouples
-
- Lube System
-
- Prelube pump groups
- Oil level regulator
- Lube oil in standard sump
-
- Mounting System
-
- IBC vibration isolators
- Puck style low efficiency isolators
- Spring type vibration isolators
-
- Power Connections
-
- Cable entry - right side
- Cable entry - rear
- Grounding groups
- left side power connections
- Neutral ground connections
- Center post busbars
- Right side power connections
- Cable entry - left side
- Rear power connections
-
- Power Termination
-
- Circuit breakers - LV packages
- Circuit breakers, UL listed
- 2000, 2500, 3200 Amp, 3 Pole, IEC rated Circuit breakers
- Circuit breakers, IEC compliant
- 2000, 2500, 3200 Amp, 4 Pole, IEC rated Circuit breakers
- 1600, 2000, 2500, 3000 and 4000 Amp, 3 Pole, UL-100% rated Circuit breakers
-
- Special Tests / Reports
-
- Standard engine test
- Torsional vibration analysis
- Fuel consumption test
- PGS Test report @ 1.0 power factor
- OSPD Certification
- PGS Test report @ 0.8 power factor
- Generator set report
-
- Starting / Charging
-
- Engine barring device
- Electric starting motors
- Jacket water heaters
- Starter cover
- Batteries, racks and cables
- Air pressure regulator
- 10, 20, 35 Amp Battery chargers
- 50 Amp NFPA battery charger
- Air starting motors