Maximum Gross Power
Maximum Gross Power - Maximum Engine Speed
Maximum Net Torque - ISO 9249
Maximum Gross Power - SAE J1995
Maximum Gross Torque - SAE J1995
Maximum Gross Torque - ISO 14396
Rated Net Power - ISO 9249
Rated Net Power - ISO 9249 (DIN)
Maximum Gross Power - ISO 14396
Rated Net Power - Rated Engine Speed
Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator.
Rated Net Power - SAE J1349
Maximum Gross Power - ISO 14396 (DIN)
Engine meets Tier 4 Final/Stage V emission standards.
Maximum Net Torque - SAE J1349
Maximum Working Pressure - Steering Pump
Steering Articulation Angle - Each Direction
Steering Cycle Times - Full Left to Full Right - At 2,350 rpm: 90 rpm Steering Wheel Speed
Maximum Flow - Steering Pump
Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left
Loader Hydraulic System
Hydraulic Cycle Time - Dump, at Maximum Reach
Hydraulic Cycle Time - Total Cycle Time
Maximum Working Pressure - Implement Pump
Relief Pressure - Tilt Cylinder
Hydraulic Cycle Time - Rackback
Relief Pressure - Tilt Cylinder - 3rd Function Maximum Working Pressure
Hydraulic Cycle Time - Raise, Ground Level to Maximum Lift
Maximum Flow - Implement Pump
Relief Pressure - Tilt Cylinder - 4th Function Maximum Working Pressure
Maximum Flow - Implement Pump - 4th Function, Maximum Flow
Maximum Flow - Implement Pump - 3rd Function, Maximum Flow
Hydraulic Cycle Time - Float Down, Maximum Lift to Ground Level
Service Refill Capacities
Hydraulic System - Including Tank
DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
Axles - Front Center Differential
Axles - Rear Center Differential
Diesel Exhaust Fluid (DEF) Tank
*Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1.
Forward and Reverse - Speed Range 3
Forward and Reverse - Speed Range 2*
Forward and Reverse - Speed Range 1*
In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities.
15.5 R25 L2 XTLA
Other Choices Include
17.5 R25 L2 XTLA; 15.5 R25 L3 XHA2; 17.5 R25 L3 XHA2; 17.5-25 L2/L3 SGL; 17.5-25 L3 HRL D/L-3A; 17.5 R25 L2 Snow
Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
Other tire choices are available. Contact your Cat dealer for details.
EN ISO 3449:2008 (ISO 3449:2005)
The declared dynamic operator sound pressure levels per ISO 6396:2008*, when the cab is properly installed and maintained, is 77 dB(A).
The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC (as amended by 2005/88/EC) is 103 dB(A).
Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
*The measurements were conducted with the cab doors and windows closed.