The Caterpillar 906 Compact Wheel Loader is built to the same high standards as larger Caterpillar wheel loaders. This machine delivers Cat reliability, durability and efficient operation, even in the toughest working conditions.
|
|
|
|
Engine
- Net Power
- 68HP
- Gross Power
- 75HP
- ISO 9249 Rating
- 71HP
- EEC 80/1269 Rating
- 71HP
- SAE J1349 Rating
- 71HP
- Model
- 3044C
Weights
- Operating Weight
- 10912lb
Operating Specifications
- Rated Bucket Capacity
- 1.04yd³
- Rated Operating Load at Full Turn - Forks
- 4433lb
- Full Turn Static Tipping Load - Forks
- 5500lb
- Breakout Force
- 10340lb
- Rated Operating Load at Full Turn - Bucket
- 3333lb
- Straight Tipping Load - Bucket
- 7546lb
- Hydraulic Lift Capacity
- 9100lb
- Full Turn Static Tipping Load - Bucket
- 6666lb
- Rack Back - Transport Position
- 53°
- Dump Height at Full Lift
- 7.95ft
- Reach - Without Teeth
- 2.75ft
- Articulation
- 40°
- Oscillation +/-
- 11°
Engine Dimensions
- Bore
- 3.7in
- Stroke
- 4.72in
Dimensions
- Tread Width
- 4.58ft
Buckets
- Bucket Width
- 6.17ft
Cab
- ROPS
- meets the following criteria: SAE J1040 MAY94, ISO 3471-1:1986
- FOPS
- meets the following criteria: SAE J231 JAN81, ISO 3449:1992
- Sound
- Sound level is below 75 dB(A)
Power Train, Axles and Brakes
- Transmission Type
- Closed-loop, two-speed hydrostatic single-path transmission.
- Maximum Travel Speeds - With 12.5-18 Tires, Forward and Reverse, Low
- 4mile/h
- Maximum Travel Speeds - Forward and Reverse, High
- 12mile/h
- Axle and Final Drives
- fixed front axle with limited slip differential and planetary ge
- Service and Parking Brake
- Are combined in a single, dry-disc driveline brake
- Brake Standards
- Brake meets ISO 3450:1996
Hydraulic System
- Pressure Flow at 2,600 rpm and 70 bar (1,000 psi)
- 15.9gal/min
- 3rd Valve Flow
- 17.7gal/min
- Hydraulic Cycle Time - Lower, Float
- 3.2
- Main Relief
- 3400psi
Loader Hydraulic System
- Hydraulic Cycle Time - Lift
- 4.5
- Hydraulic Cycle Time - Dump
- 1.5
Maximum Material Densities
- General Purpose Bucket - 0.6 m3 (0.8 yd3)
- 3000lb/yd³
- Multi Purpose Bucket - 0.6 m3 (0.8 y3)
- 3000lb/yd³
- Light Material - Bucket 1.0 m3 (1.3 yd)
- 1950lb/yd³
- High Dump Bucket - 0.7 m3 (0.8 yd3)
- 3200lb/yd³
- Stone Sieve Bucket - 0.6 m3 (0.8 yd3)
- 3300lb/yd³
- Side Dump Bucket
- 3000lb/yd³
Service Refill Capacities
- Cooling System
- 5.5gal (US)
- Fuel Tank
- 19.6gal (US)
- Hydraulic System
- 17.5gal (US)
- Engine Oil
- 2.6gal (US)
Standard Equipment:
-
- Cab, Rops, Sound Suppressed, Pressurized Includes:
-
- Digital service hour meter
- Gauges, Fuel Level and hydraulic oil temperature
- Ground level door releases
- Heater/Defroster with 11 vents
- Lockable toolbox
- Power sockets, auxiliary
- Radio antenna
- Right armrest
- Seatbelt, retractable
- Warning indicators, for major systems
- Wet wiper, front and rear
- Wiring for radio and rotary beacon
Optional Equipment:
-
- Cab, Comfort, Including:
-
- Fabric suspension seat
- Sliding window, left hand side
- Tilt steering wheel and turning ball
1312 mm (52 in)
- Height
- 19.4 in
- Width
- 51.7 in
- Weight
- 180.8 lb
1312 mm (52 in)
- Height
- 20.4 in
- Width
- 51.7 in
- Weight
- 269 lb
1300 mm (51 in)
- Height
- 25.8 in
- Width
- 51.2 in
- Weight
- 342.2 lb
1438 mm (57 in)
- Height
- 35.8 in
- Width
- 56.6 in
- Weight
- 319.7 lb
PC310
- Working Width
- 39.4 in
- Maximum Cutting Depth
- 5.1 in
- Required Hydraulics
- High Flow XPS
PC305
- Working Width
- 17.7 in
- Maximum Cutting Depth
- 6.7 in
- Required Hydraulics
- High Flow
PC306
- Working Width
- 23.6 in
- Maximum Cutting Depth
- 6.7 in
- Required Hydraulics
- High Flow
PC306 With Water
- Working Width
- 23.6 in
- Maximum Cutting Depth
- 6.7 in
- Required Hydraulics
- High Flow
PC104
- Working Width
- 13.8 in
- Maximum Cutting Depth
- 5.9 in
- Required Hydraulics
- Standard Flow
PC105
- Working Width
- 17.7 in
- Maximum Cutting Depth
- 5.9 in
- Required Hydraulics
- Standard Flow
BD118 Sawdust
- Capacity
- 2 yd³
- Width
- 73.2 in
- Required Hydraulics
- Standard Flow
BD121 Sawdust
- Capacity
- 2.3 yd³
- Width
- 85.2 in
- Required Hydraulics
- Standard Flow
BD118 Sand
- Capacity
- 1 yd³
- Width
- 73.2 in
- Required Hydraulics
- Standard Flow
BD121 Sand
- Capacity
- 1.3 yd³
- Width
- 85.2 in
- Required Hydraulics
- Standard Flow
MB200
- Capacity
- 0.26 yd³
- Width
- 54.6 in
- Required Hydraulics
- Standard Flow
MB250
- Capacity
- 0.33 yd³
- Width
- 54.7 in
- Required Hydraulics
- Standard Flow
0.7 m3 (0.9 yd3), ISO Coupler, Bolt-On Teeth
- Width
- 74 in
- Weight
- 1291.9 lb
- Height
- 36.5 in
0.7 m3 (0.9 yd3), ISO Coupler, Bolt-On Cutting Edge
- Width
- 74 in
- Weight
- 1291.9 lb
- Height
- 37.1 in
1.3 m3 (1.7 yd3), ISO Coupler, Bolt-On Cutting Edge
- Width
- 81.9 in
- Weight
- 1029.6 lb
- Height
- 38.4 in
1.6 m3 (2.0 yd3), Skid Steer Coupler, Bolt-On Cutting Edge
- Width
- 81.9 in
- Weight
- 1146.4 lb
- Height
- 40 in
1.6 m3 (2.0 yd3), ISO Coupler, Bolt-On Cutting Edge
- Width
- 81.9 in
- Weight
- 1148.6 lb
- Height
- 39.8 in
2080 mm (82 in), Skid Steer Coupler, BOCE
- Width
- 81.9 in
- Weight
- 1295 lb
- Height - Grapples Closed
- 41.5 in
1.3 m3 (1.7 yd3), Skid Steer Coupler, Bolt-On Cutting Edge
- Width
- 81.9 in
- Weight
- 1027.4 lb
- Height
- 38.4 in
1.4 m3 (1.8 yd3), ISO Coupler, Bolt-On Cutting Edge
- Width
- 81.9 in
- Weight
- 1058.2 lb
- Height
- 38.8 in
1.2 m3 (1.5 yd3), ISO Coupler, Bolt-On Cutting Edge
- Width
- 81.9 in
- Weight
- 989.9 lb
- Height
- 37.6 in
1.2 m3 (1.4 yd3), ISO Coupler, Bolt-On Cutting Edge
- Width
- 81.9 in
- Weight
- 996.5 lb
- Height
- 37.6 in
1.1 m3 (1.4 yd3), Skid Steer Coupler, Bolt-On Cutting Edge
- Width
- 80.5 in
- Weight
- 917.1 lb
- Height
- 36.8 in
1.1 m3 (1.4 yd3), Skid Steer Coupler, Bolt-On Teeth
- Width
- 80.2 in
- Weight
- 870.8 lb
- Height
- 36.2 in
1.1 m3 (1.4 yd3), ISO Coupler, Bolt-On Teeth
- Width
- 80.2 in
- Weight
- 873 lb
- Height
- 36.2 in
1.2 m3 (1.5 yd3), Skid Steer Coupler, Bolt-On Cutting Edge
- Width
- 81.9 in
- Weight
- 987.7 lb
- Height
- 37.6 in
1.0 m3 (1.3 yd3), ISO Coupler, Bolt-On Cutting Edge
- Width
- 74.4 in
- Weight
- 879.6 lb
- Height
- 36.8 in
1.0 m3 (1.3 yd3), ISO Coupler, Bolt-On Teeth
- Width
- 74 in
- Weight
- 831.1 lb
- Height
- 36.2 in
1.0 m3 (1.3 yd3), ISO Coupler, Bolt-On Teeth
- Width
- 74 in
- Weight
- 837.8 lb
- Height
- 36.2 in
0.8 m3 (1.0 yd3), Skid Steer Coupler, Bolt-On Cutting Edge
- Width
- 74.4 in
- Weight
- 822.3 lb
- Height
- 36.3 in
1.0 m3 (1.3 yd3), Skid Steer Coupler, Bolt-On Cutting Edge
- Width
- 74.4 in
- Weight
- 877.4 lb
- Height
- 36.8 in
BP118C
- Overall Width
- 90.4 in
- Sweeping Width
- 72 in
- Brush Diameter
- 26 in
BU115
- Overall Width
- 71.3 in
- Sweeping Width
- 59.1 in
- Brush Diameter
- 26.2 in
BU118
- Overall Width
- 83.3 in
- Sweeping Width
- 70.9 in
- Brush Diameter
- 26.2 in
BP115C
- Overall Width
- 78.3 in
- Sweeping Width
- 60 in
- Brush Diameter
- 26 in
BA118C Manual
- Overall Width
- 104 in
- Sweeping Width
- 83 in
- Brush Diameter
- 32 in
BA118C Hydraulic
- Overall Width
- 104 in
- Sweeping Width
- 83 in
- Brush Diameter
- 32 in
2007 mm (79 in)
- Blade Width
- 79 in
- Width - Fully Angled
- 68.9 in
- Maximum Blade Angle - Right/Left of Center
- 30 degrees
2337 mm (92 in)
- Blade Width
- 92 in
- Width - Fully Angled
- 80.7 in
- Maximum Blade Angle - Right/Left of Center
- 30 degrees
2134 mm (84 in)
- Blade Width
- 84 in
- Width - Fully Angled
- 76.7 in
- Maximum Blade Angle - Right/Left of Center
- 30 degrees
1140 mm (45 in)
- Overall Width
- 55.4 in
- Overall Height
- 51.8 in
- Capacity
- 3007.1 lb
1140 mm (45 in)
- Overall Width
- 50.6 in
- Overall Height
- 22.4 in
- Capacity
- 2004 lb
1829 mm (72 in)
- Blade Width
- 72 in
- Width - Fully Angled
- 66.3 in
- Maximum Blade Angle - Right/Left of Center
- 30 degrees
1803 mm (71 in)
- Overall Width
- 55.2 in
- Overall Height
- 34.4 in
- Maximum Opening Width
- 71 in
2133 mm (84 in)
- Overall Width
- 55.2 in
- Overall Height
- 34.4 in
- Maximum Opening Width
- 84 in
890 mm (35 in)
- Overall Width
- 50.6 in
- Overall Height
- 22.4 in
- Capacity
- 2004 lb
890 mm (35 in)
- Overall Width
- 55.4 in
- Overall Height
- 51.8 in
- Capacity
- 3007.1 lb
A41
- Drive Shaft Torque at Maximum Pressure
- 3037.3 lb/ft
- Drive Method
- Gerotor Motor - Single Planetary Reduction
- Mounting Bracket Design
- Skid Steer Loader Coupler
A23
- Drive Shaft Torque at Maximum Pressure
- 1699.3 lb/ft
- Drive Method
- Gerotor Motor - Direct Drive
- Mounting Bracket Design
- Skid Steer Loader Coupler
Skid Steer to Horizontal Pin Lock Adapter
- Weight
- 143.3 lb
- Width
- 12.8 in
- Overall Length
- 44.3 in
BU115
- Overall Width
- 71.3 in
- Sweeping Width
- 59.4 in
- Brush Diameter
- 26 in
BU118
- Overall Width
- 83.3 in
- Sweeping Width
- 73.4 in
- Brush Diameter
- 26 in
T315 Hydraulic Side Shift
- Standard Boom Length
- 60 in
- Cutting Width
- 8 in
- Chain Type
- Standard
T315 Hydraulic Side Shift
- Standard Boom Length
- 60 in
- Cutting Width
- 6 in
- Chain Type
- Standard
T315 Hydraulic Side Shift
- Standard Boom Length
- 60 in
- Required Hydraulics
- High Flow XPS
- Overall Width
- 74.8 in
T112 Manual Side Shift
- Standard Boom Length
- 48 in
- Cutting Width
- 6 in
- Chain Type
- Standard
T112 Manual Side Shift
- Standard Boom Length
- 48 in
- Cutting Width
- 6 in
- Chain Type
- Rockfrost
T315 Hydraulic Side Shift
- Standard Boom Length
- 60 in
- Cutting Width
- 6 in
- Chain Type
- Standard
T112 Hydraulic Side Shift
- Standard Boom Length
- 48 in
- Cutting Width
- 6 in
- Chain Type
- Standard
T112 Manual Side Shift
- Standard Boom Length
- 48 in
- Cutting Width
- 6 in
- Chain Type
- Combo
T112 Manual Side Shift
- Standard Boom Length
- 48 in
- Required Hydraulics
- Standard Flow
- Overall Width
- 74.8 in
T112 Hydraulic Side Shift
- Standard Boom Length
- 48 in
- Cutting Width
- 6 in
- Chain Type
- Rockfrost
T112 Hydraulic Side Shift
- Standard Boom Length
- 48 in
- Cutting Width
- 6 in
- Chain Type
- Combo
T112 Hydraulic Side Shift
- Standard Boom Length
- 48 in
- Required Hydraulics
- Standard Flow
- Overall Width
- 74.8 in
T109 Manual Side Shift
- Standard Boom Length
- 36 in
- Cutting Width
- 8 in
- Chain Type
- Standard
T112 Hydraulic Side Shift
- Standard Boom Length
- 48 in
- Cutting Width
- 8 in
- Chain Type
- Standard
T109 Manual Side Shift
- Standard Boom Length
- 36 in
- Required Hydraulics
- Standard Flow
- Overall Width
- 56.1 in
T109 Manual Side Shift
- Standard Boom Length
- 36 in
- Cutting Width
- 6 in
- Chain Type
- Terminator
T109 Manual Side Shift
- Standard Boom Length
- 36 in
- Cutting Width
- 6 in
- Chain Type
- Rockfrost
T109 Manual Side Shift
- Standard Boom Length
- 36 in
- Cutting Width
- 6 in
- Chain Type
- Standard
T109 Hydraulic Side Shift
- Standard Boom Length
- 36 in
- Cutting Width
- 6 in
- Chain Type
- Standard
T109 Manual Side Shift
- Standard Boom Length
- 36 in
- Cutting Width
- 6 in
- Chain Type
- Combo
T109 Hydraulic Side Shift
- Standard Boom Length
- 36 in
- Required Hydraulics
- Standard Flow
- Overall Width
- 56.1 in
T109 Hydraulic Side Shift
- Standard Boom Length
- 36 in
- Cutting Width
- 6 in
- Chain Type
- Combo
T109 Hydraulic Side Shift
- Standard Boom Length
- 36 in
- Cutting Width
- 6 in
- Chain Type
- Rockfrost
T109 Hydraulic Side Shift
- Standard Boom Length
- 36 in
- Cutting Width
- 8 in
- Chain Type
- Standard
T109 Hydraulic Side Shift
- Standard Boom Length
- 36 in
- Cutting Width
- 6 in
- Chain Type
- Terminator
LT118
- Working Width
- 72.8 in
- Working Depth
- 25-152 mm (1-6 in)
- Weight
- 925.9 lb
LT114
- Working Width
- 53.3 in
- Working Depth
- 25-152 mm (1-6 in)
- Weight
- 925.9 lb
SG16
- Required Hydraulics
- Standard Flow
- Cutting Wheel Diameter - With Teeth
- 21.5 in
- Cutting Depth - Below Ground
- 20.5 in
3.66 m (12 ft)
- Working Width
- 144 in
- Weight
- 952.4 lb
- Length
- 43.7 in
3.66 m (12 ft)
- Working Width
- 144 in
- Weight
- 1347 lb
- Length
- 45 in
3.66 m (12 ft)
- Working Width
- 144 in
- Weight
- 1402.1 lb
- Length
- 45 in
3.05 m (10 ft)
- Working Width
- 120 in
- Weight
- 866.4 lb
- Length
- 43.7 in
3.05 m (10 ft)
- Working Width
- 120 in
- Weight
- 1153 lb
- Length
- 45 in
2.44 m (8 ft)
- Working Width
- 96 in
- Weight
- 1082.5 lb
- Length
- 45 in
3.05 m (10 ft)
- Working Width
- 120 in
- Weight
- 1201.5 lb
- Length
- 45 in
2.44 m (8 ft)
- Working Width
- 96 in
- Weight
- 778.2 lb
- Length
- 43.7 in
3.7 m (12 ft)
- Working Width (Wings Closed)
- 145 in
- Overall Width (Wings Closed)
- 151.8 in
- Overall Width (Wings Open)
- 219.5 in
2.44 m (8 ft)
- Working Width
- 96 in
- Weight
- 1036.2 lb
- Length
- 45 in
2.4 m (8 ft)
- Working Width (Wings Closed)
- 96.5 in
- Overall Width (Wings Closed)
- 104.2 in
- Overall Width (Wings Open)
- 161.7 in
2.8 m (9 ft)
- Working Width (Wings Closed)
- 108.5 in
- Overall Width (Wings Closed)
- 116.2 in
- Overall Width (Wings Open)
- 173.7 in
3.1 m (10 ft)
- Working Width (Wings Closed)
- 121.3 in
- Overall Width (Wings Closed)
- 128.1 in
- Overall Width (Wings Open)
- 195.9 in
3.0 m (10 ft)
- Width
- 119.9 in
- Angled Width
- 98.3 in
- Weight
- 1217 lb
1.8 m (6 ft)
- Width
- 71.9 in
- Angled Width
- 59 in
- Weight
- 992.1 lb
2.1 m (7 ft)
- Width
- 84 in
- Angled Width
- 68.8 in
- Weight
- 1051.6 lb
2.4 m (8 ft)
- Width
- 95.9 in
- Angled Width
- 78.6 in
- Weight
- 1106.7 lb
2.7 m (9 ft)
- Width
- 108 in
- Angled Width
- 88.5 in
- Weight
- 1161.8 lb
SR418
- Intake Width
- 76.5 in
- Overall Width
- 85.9 in
- Weight
- 1016.3 lb
1524 mm (60 in)
- Straight Width
- 60 in
- Angled Width
- 53 in
- Interface Type
- Skid Steer Coupler
2134 mm (84 in)
- Straight Width
- 84 in
- Angled Width
- 73 in
- Interface Type
- Skid Steer Coupler
SW360, 200 mm (8 in)
- Maximum Cutting Depth
- 23.6 in
- Wheel Width
- 7.9 in
- Weight
- 2921.1 lb
SW360, 80 mm (3 in)
- Maximum Cutting Depth
- 23.6 in
- Wheel Width
- 3.1 in
- Weight
- 3174.7 lb
SW380, 250 mm (10 in)
- Maximum Cutting Depth
- 31.5 in
- Wheel Width
- 9.8 in
- Weight
- 3196.7 lb
SW360, 130 mm (5 in)
- Maximum Cutting Depth
- 23.6 in
- Wheel Width
- 5.1 in
- Weight
- 3009.3 lb
SW360, 100 mm (4 in)
- Maximum Cutting Depth
- 23.6 in
- Wheel Width
- 3.9 in
- Weight
- 2943.2 lb
SW360, 160 mm (6 in)
- Maximum Cutting Depth
- 23.6 in
- Wheel Width
- 6.3 in
- Weight
- 2899.1 lb
SW345, 80 mm (3 in)
- Maximum Cutting Depth
- 17.7 in
- Wheel Width
- 3.1 in
- Weight
- 2482.4 lb
SW345, 130 mm (5 in)
- Maximum Cutting Depth
- 17.7 in
- Wheel Width
- 5.1 in
- Weight
- 2239.9 lb
LR116
- Working Width
- 62 in
- Bucket Capacity - Struck
- 0.4 yd³
- Weight
- 1311.7 lb
LR119
- Working Width
- 74.1 in
- Bucket Capacity - Struck
- 0.4 yd³
- Weight
- 1439.6 lb
1148 mm (45 in)
- Length
- 38.7 in
- Height
- 23.4 in
- Overall Width
- 45.2 in
Specifications
Engine
- Net Power
- 68HP
- Gross Power
- 75HP
- ISO 9249 Rating
- 71HP
- EEC 80/1269 Rating
- 71HP
- SAE J1349 Rating
- 71HP
- Model
- 3044C
Weights
- Operating Weight
- 10912lb
Operating Specifications
- Rated Bucket Capacity
- 1.04yd³
- Rated Operating Load at Full Turn - Forks
- 4433lb
- Full Turn Static Tipping Load - Forks
- 5500lb
- Breakout Force
- 10340lb
- Rated Operating Load at Full Turn - Bucket
- 3333lb
- Straight Tipping Load - Bucket
- 7546lb
- Hydraulic Lift Capacity
- 9100lb
- Full Turn Static Tipping Load - Bucket
- 6666lb
- Rack Back - Transport Position
- 53°
- Dump Height at Full Lift
- 7.95ft
- Reach - Without Teeth
- 2.75ft
- Articulation
- 40°
- Oscillation +/-
- 11°
Engine Dimensions
- Bore
- 3.7in
- Stroke
- 4.72in
Dimensions
- Tread Width
- 4.58ft
Buckets
- Bucket Width
- 6.17ft
Cab
- ROPS
- meets the following criteria: SAE J1040 MAY94, ISO 3471-1:1986
- FOPS
- meets the following criteria: SAE J231 JAN81, ISO 3449:1992
- Sound
- Sound level is below 75 dB(A)
Power Train, Axles and Brakes
- Transmission Type
- Closed-loop, two-speed hydrostatic single-path transmission.
- Maximum Travel Speeds - With 12.5-18 Tires, Forward and Reverse, Low
- 4mile/h
- Maximum Travel Speeds - Forward and Reverse, High
- 12mile/h
- Axle and Final Drives
- fixed front axle with limited slip differential and planetary ge
- Service and Parking Brake
- Are combined in a single, dry-disc driveline brake
- Brake Standards
- Brake meets ISO 3450:1996
Hydraulic System
- Pressure Flow at 2,600 rpm and 70 bar (1,000 psi)
- 15.9gal/min
- 3rd Valve Flow
- 17.7gal/min
- Hydraulic Cycle Time - Lower, Float
- 3.2
- Main Relief
- 3400psi
Loader Hydraulic System
- Hydraulic Cycle Time - Lift
- 4.5
- Hydraulic Cycle Time - Dump
- 1.5
Maximum Material Densities
- General Purpose Bucket - 0.6 m3 (0.8 yd3)
- 3000lb/yd³
- Multi Purpose Bucket - 0.6 m3 (0.8 y3)
- 3000lb/yd³
- Light Material - Bucket 1.0 m3 (1.3 yd)
- 1950lb/yd³
- High Dump Bucket - 0.7 m3 (0.8 yd3)
- 3200lb/yd³
- Stone Sieve Bucket - 0.6 m3 (0.8 yd3)
- 3300lb/yd³
- Side Dump Bucket
- 3000lb/yd³
Service Refill Capacities
- Cooling System
- 5.5gal (US)
- Fuel Tank
- 19.6gal (US)
- Hydraulic System
- 17.5gal (US)
- Engine Oil
- 2.6gal (US)
Standard/Optional Features
Standard Equipment:
-
- Cab, Rops, Sound Suppressed, Pressurized Includes:
-
- Digital service hour meter
- Gauges, Fuel Level and hydraulic oil temperature
- Ground level door releases
- Heater/Defroster with 11 vents
- Lockable toolbox
- Power sockets, auxiliary
- Radio antenna
- Right armrest
- Seatbelt, retractable
- Warning indicators, for major systems
- Wet wiper, front and rear
- Wiring for radio and rotary beacon
Optional Equipment:
-
- Cab, Comfort, Including:
-
- Fabric suspension seat
- Sliding window, left hand side
- Tilt steering wheel and turning ball
Attachments
1312 mm (52 in)
- Height
- 19.4 in
- Width
- 51.7 in
- Weight
- 180.8 lb
1312 mm (52 in)
- Height
- 20.4 in
- Width
- 51.7 in
- Weight
- 269 lb
1300 mm (51 in)
- Height
- 25.8 in
- Width
- 51.2 in
- Weight
- 342.2 lb
1438 mm (57 in)
- Height
- 35.8 in
- Width
- 56.6 in
- Weight
- 319.7 lb
PC310
- Working Width
- 39.4 in
- Maximum Cutting Depth
- 5.1 in
- Required Hydraulics
- High Flow XPS
PC305
- Working Width
- 17.7 in
- Maximum Cutting Depth
- 6.7 in
- Required Hydraulics
- High Flow
PC306
- Working Width
- 23.6 in
- Maximum Cutting Depth
- 6.7 in
- Required Hydraulics
- High Flow
PC306 With Water
- Working Width
- 23.6 in
- Maximum Cutting Depth
- 6.7 in
- Required Hydraulics
- High Flow
PC104
- Working Width
- 13.8 in
- Maximum Cutting Depth
- 5.9 in
- Required Hydraulics
- Standard Flow
PC105
- Working Width
- 17.7 in
- Maximum Cutting Depth
- 5.9 in
- Required Hydraulics
- Standard Flow
BD118 Sawdust
- Capacity
- 2 yd³
- Width
- 73.2 in
- Required Hydraulics
- Standard Flow
BD121 Sawdust
- Capacity
- 2.3 yd³
- Width
- 85.2 in
- Required Hydraulics
- Standard Flow
BD118 Sand
- Capacity
- 1 yd³
- Width
- 73.2 in
- Required Hydraulics
- Standard Flow
BD121 Sand
- Capacity
- 1.3 yd³
- Width
- 85.2 in
- Required Hydraulics
- Standard Flow
MB200
- Capacity
- 0.26 yd³
- Width
- 54.6 in
- Required Hydraulics
- Standard Flow
MB250
- Capacity
- 0.33 yd³
- Width
- 54.7 in
- Required Hydraulics
- Standard Flow
0.7 m3 (0.9 yd3), ISO Coupler, Bolt-On Teeth
- Width
- 74 in
- Weight
- 1291.9 lb
- Height
- 36.5 in
0.7 m3 (0.9 yd3), ISO Coupler, Bolt-On Cutting Edge
- Width
- 74 in
- Weight
- 1291.9 lb
- Height
- 37.1 in
1.3 m3 (1.7 yd3), ISO Coupler, Bolt-On Cutting Edge
- Width
- 81.9 in
- Weight
- 1029.6 lb
- Height
- 38.4 in
1.6 m3 (2.0 yd3), Skid Steer Coupler, Bolt-On Cutting Edge
- Width
- 81.9 in
- Weight
- 1146.4 lb
- Height
- 40 in
1.6 m3 (2.0 yd3), ISO Coupler, Bolt-On Cutting Edge
- Width
- 81.9 in
- Weight
- 1148.6 lb
- Height
- 39.8 in
2080 mm (82 in), Skid Steer Coupler, BOCE
- Width
- 81.9 in
- Weight
- 1295 lb
- Height - Grapples Closed
- 41.5 in
1.3 m3 (1.7 yd3), Skid Steer Coupler, Bolt-On Cutting Edge
- Width
- 81.9 in
- Weight
- 1027.4 lb
- Height
- 38.4 in
1.4 m3 (1.8 yd3), ISO Coupler, Bolt-On Cutting Edge
- Width
- 81.9 in
- Weight
- 1058.2 lb
- Height
- 38.8 in
1.2 m3 (1.5 yd3), ISO Coupler, Bolt-On Cutting Edge
- Width
- 81.9 in
- Weight
- 989.9 lb
- Height
- 37.6 in
1.2 m3 (1.4 yd3), ISO Coupler, Bolt-On Cutting Edge
- Width
- 81.9 in
- Weight
- 996.5 lb
- Height
- 37.6 in
1.1 m3 (1.4 yd3), Skid Steer Coupler, Bolt-On Cutting Edge
- Width
- 80.5 in
- Weight
- 917.1 lb
- Height
- 36.8 in
1.1 m3 (1.4 yd3), Skid Steer Coupler, Bolt-On Teeth
- Width
- 80.2 in
- Weight
- 870.8 lb
- Height
- 36.2 in
1.1 m3 (1.4 yd3), ISO Coupler, Bolt-On Teeth
- Width
- 80.2 in
- Weight
- 873 lb
- Height
- 36.2 in
1.2 m3 (1.5 yd3), Skid Steer Coupler, Bolt-On Cutting Edge
- Width
- 81.9 in
- Weight
- 987.7 lb
- Height
- 37.6 in
1.0 m3 (1.3 yd3), ISO Coupler, Bolt-On Cutting Edge
- Width
- 74.4 in
- Weight
- 879.6 lb
- Height
- 36.8 in
1.0 m3 (1.3 yd3), ISO Coupler, Bolt-On Teeth
- Width
- 74 in
- Weight
- 831.1 lb
- Height
- 36.2 in
1.0 m3 (1.3 yd3), ISO Coupler, Bolt-On Teeth
- Width
- 74 in
- Weight
- 837.8 lb
- Height
- 36.2 in
0.8 m3 (1.0 yd3), Skid Steer Coupler, Bolt-On Cutting Edge
- Width
- 74.4 in
- Weight
- 822.3 lb
- Height
- 36.3 in
1.0 m3 (1.3 yd3), Skid Steer Coupler, Bolt-On Cutting Edge
- Width
- 74.4 in
- Weight
- 877.4 lb
- Height
- 36.8 in
BP118C
- Overall Width
- 90.4 in
- Sweeping Width
- 72 in
- Brush Diameter
- 26 in
BU115
- Overall Width
- 71.3 in
- Sweeping Width
- 59.1 in
- Brush Diameter
- 26.2 in
BU118
- Overall Width
- 83.3 in
- Sweeping Width
- 70.9 in
- Brush Diameter
- 26.2 in
BP115C
- Overall Width
- 78.3 in
- Sweeping Width
- 60 in
- Brush Diameter
- 26 in
BA118C Manual
- Overall Width
- 104 in
- Sweeping Width
- 83 in
- Brush Diameter
- 32 in
BA118C Hydraulic
- Overall Width
- 104 in
- Sweeping Width
- 83 in
- Brush Diameter
- 32 in
2007 mm (79 in)
- Blade Width
- 79 in
- Width - Fully Angled
- 68.9 in
- Maximum Blade Angle - Right/Left of Center
- 30 degrees
2337 mm (92 in)
- Blade Width
- 92 in
- Width - Fully Angled
- 80.7 in
- Maximum Blade Angle - Right/Left of Center
- 30 degrees
2134 mm (84 in)
- Blade Width
- 84 in
- Width - Fully Angled
- 76.7 in
- Maximum Blade Angle - Right/Left of Center
- 30 degrees
1140 mm (45 in)
- Overall Width
- 55.4 in
- Overall Height
- 51.8 in
- Capacity
- 3007.1 lb
1140 mm (45 in)
- Overall Width
- 50.6 in
- Overall Height
- 22.4 in
- Capacity
- 2004 lb
1829 mm (72 in)
- Blade Width
- 72 in
- Width - Fully Angled
- 66.3 in
- Maximum Blade Angle - Right/Left of Center
- 30 degrees
1803 mm (71 in)
- Overall Width
- 55.2 in
- Overall Height
- 34.4 in
- Maximum Opening Width
- 71 in
2133 mm (84 in)
- Overall Width
- 55.2 in
- Overall Height
- 34.4 in
- Maximum Opening Width
- 84 in
890 mm (35 in)
- Overall Width
- 50.6 in
- Overall Height
- 22.4 in
- Capacity
- 2004 lb
890 mm (35 in)
- Overall Width
- 55.4 in
- Overall Height
- 51.8 in
- Capacity
- 3007.1 lb
A41
- Drive Shaft Torque at Maximum Pressure
- 3037.3 lb/ft
- Drive Method
- Gerotor Motor - Single Planetary Reduction
- Mounting Bracket Design
- Skid Steer Loader Coupler
A23
- Drive Shaft Torque at Maximum Pressure
- 1699.3 lb/ft
- Drive Method
- Gerotor Motor - Direct Drive
- Mounting Bracket Design
- Skid Steer Loader Coupler
Skid Steer to Horizontal Pin Lock Adapter
- Weight
- 143.3 lb
- Width
- 12.8 in
- Overall Length
- 44.3 in
BU115
- Overall Width
- 71.3 in
- Sweeping Width
- 59.4 in
- Brush Diameter
- 26 in
BU118
- Overall Width
- 83.3 in
- Sweeping Width
- 73.4 in
- Brush Diameter
- 26 in
T315 Hydraulic Side Shift
- Standard Boom Length
- 60 in
- Cutting Width
- 8 in
- Chain Type
- Standard
T315 Hydraulic Side Shift
- Standard Boom Length
- 60 in
- Cutting Width
- 6 in
- Chain Type
- Standard
T315 Hydraulic Side Shift
- Standard Boom Length
- 60 in
- Required Hydraulics
- High Flow XPS
- Overall Width
- 74.8 in
T112 Manual Side Shift
- Standard Boom Length
- 48 in
- Cutting Width
- 6 in
- Chain Type
- Standard
T112 Manual Side Shift
- Standard Boom Length
- 48 in
- Cutting Width
- 6 in
- Chain Type
- Rockfrost
T315 Hydraulic Side Shift
- Standard Boom Length
- 60 in
- Cutting Width
- 6 in
- Chain Type
- Standard
T112 Hydraulic Side Shift
- Standard Boom Length
- 48 in
- Cutting Width
- 6 in
- Chain Type
- Standard
T112 Manual Side Shift
- Standard Boom Length
- 48 in
- Cutting Width
- 6 in
- Chain Type
- Combo
T112 Manual Side Shift
- Standard Boom Length
- 48 in
- Required Hydraulics
- Standard Flow
- Overall Width
- 74.8 in
T112 Hydraulic Side Shift
- Standard Boom Length
- 48 in
- Cutting Width
- 6 in
- Chain Type
- Rockfrost
T112 Hydraulic Side Shift
- Standard Boom Length
- 48 in
- Cutting Width
- 6 in
- Chain Type
- Combo
T112 Hydraulic Side Shift
- Standard Boom Length
- 48 in
- Required Hydraulics
- Standard Flow
- Overall Width
- 74.8 in
T109 Manual Side Shift
- Standard Boom Length
- 36 in
- Cutting Width
- 8 in
- Chain Type
- Standard
T112 Hydraulic Side Shift
- Standard Boom Length
- 48 in
- Cutting Width
- 8 in
- Chain Type
- Standard
T109 Manual Side Shift
- Standard Boom Length
- 36 in
- Required Hydraulics
- Standard Flow
- Overall Width
- 56.1 in
T109 Manual Side Shift
- Standard Boom Length
- 36 in
- Cutting Width
- 6 in
- Chain Type
- Terminator
T109 Manual Side Shift
- Standard Boom Length
- 36 in
- Cutting Width
- 6 in
- Chain Type
- Rockfrost
T109 Manual Side Shift
- Standard Boom Length
- 36 in
- Cutting Width
- 6 in
- Chain Type
- Standard
T109 Hydraulic Side Shift
- Standard Boom Length
- 36 in
- Cutting Width
- 6 in
- Chain Type
- Standard
T109 Manual Side Shift
- Standard Boom Length
- 36 in
- Cutting Width
- 6 in
- Chain Type
- Combo
T109 Hydraulic Side Shift
- Standard Boom Length
- 36 in
- Required Hydraulics
- Standard Flow
- Overall Width
- 56.1 in
T109 Hydraulic Side Shift
- Standard Boom Length
- 36 in
- Cutting Width
- 6 in
- Chain Type
- Combo
T109 Hydraulic Side Shift
- Standard Boom Length
- 36 in
- Cutting Width
- 6 in
- Chain Type
- Rockfrost
T109 Hydraulic Side Shift
- Standard Boom Length
- 36 in
- Cutting Width
- 8 in
- Chain Type
- Standard
T109 Hydraulic Side Shift
- Standard Boom Length
- 36 in
- Cutting Width
- 6 in
- Chain Type
- Terminator
LT118
- Working Width
- 72.8 in
- Working Depth
- 25-152 mm (1-6 in)
- Weight
- 925.9 lb
LT114
- Working Width
- 53.3 in
- Working Depth
- 25-152 mm (1-6 in)
- Weight
- 925.9 lb
SG16
- Required Hydraulics
- Standard Flow
- Cutting Wheel Diameter - With Teeth
- 21.5 in
- Cutting Depth - Below Ground
- 20.5 in
3.66 m (12 ft)
- Working Width
- 144 in
- Weight
- 952.4 lb
- Length
- 43.7 in
3.66 m (12 ft)
- Working Width
- 144 in
- Weight
- 1347 lb
- Length
- 45 in
3.66 m (12 ft)
- Working Width
- 144 in
- Weight
- 1402.1 lb
- Length
- 45 in
3.05 m (10 ft)
- Working Width
- 120 in
- Weight
- 866.4 lb
- Length
- 43.7 in
3.05 m (10 ft)
- Working Width
- 120 in
- Weight
- 1153 lb
- Length
- 45 in
2.44 m (8 ft)
- Working Width
- 96 in
- Weight
- 1082.5 lb
- Length
- 45 in
3.05 m (10 ft)
- Working Width
- 120 in
- Weight
- 1201.5 lb
- Length
- 45 in
2.44 m (8 ft)
- Working Width
- 96 in
- Weight
- 778.2 lb
- Length
- 43.7 in
3.7 m (12 ft)
- Working Width (Wings Closed)
- 145 in
- Overall Width (Wings Closed)
- 151.8 in
- Overall Width (Wings Open)
- 219.5 in
2.44 m (8 ft)
- Working Width
- 96 in
- Weight
- 1036.2 lb
- Length
- 45 in
2.4 m (8 ft)
- Working Width (Wings Closed)
- 96.5 in
- Overall Width (Wings Closed)
- 104.2 in
- Overall Width (Wings Open)
- 161.7 in
2.8 m (9 ft)
- Working Width (Wings Closed)
- 108.5 in
- Overall Width (Wings Closed)
- 116.2 in
- Overall Width (Wings Open)
- 173.7 in
3.1 m (10 ft)
- Working Width (Wings Closed)
- 121.3 in
- Overall Width (Wings Closed)
- 128.1 in
- Overall Width (Wings Open)
- 195.9 in
3.0 m (10 ft)
- Width
- 119.9 in
- Angled Width
- 98.3 in
- Weight
- 1217 lb
1.8 m (6 ft)
- Width
- 71.9 in
- Angled Width
- 59 in
- Weight
- 992.1 lb
2.1 m (7 ft)
- Width
- 84 in
- Angled Width
- 68.8 in
- Weight
- 1051.6 lb
2.4 m (8 ft)
- Width
- 95.9 in
- Angled Width
- 78.6 in
- Weight
- 1106.7 lb
2.7 m (9 ft)
- Width
- 108 in
- Angled Width
- 88.5 in
- Weight
- 1161.8 lb
SR418
- Intake Width
- 76.5 in
- Overall Width
- 85.9 in
- Weight
- 1016.3 lb
1524 mm (60 in)
- Straight Width
- 60 in
- Angled Width
- 53 in
- Interface Type
- Skid Steer Coupler
2134 mm (84 in)
- Straight Width
- 84 in
- Angled Width
- 73 in
- Interface Type
- Skid Steer Coupler
SW360, 200 mm (8 in)
- Maximum Cutting Depth
- 23.6 in
- Wheel Width
- 7.9 in
- Weight
- 2921.1 lb
SW360, 80 mm (3 in)
- Maximum Cutting Depth
- 23.6 in
- Wheel Width
- 3.1 in
- Weight
- 3174.7 lb
SW380, 250 mm (10 in)
- Maximum Cutting Depth
- 31.5 in
- Wheel Width
- 9.8 in
- Weight
- 3196.7 lb
SW360, 130 mm (5 in)
- Maximum Cutting Depth
- 23.6 in
- Wheel Width
- 5.1 in
- Weight
- 3009.3 lb
SW360, 100 mm (4 in)
- Maximum Cutting Depth
- 23.6 in
- Wheel Width
- 3.9 in
- Weight
- 2943.2 lb
SW360, 160 mm (6 in)
- Maximum Cutting Depth
- 23.6 in
- Wheel Width
- 6.3 in
- Weight
- 2899.1 lb
SW345, 80 mm (3 in)
- Maximum Cutting Depth
- 17.7 in
- Wheel Width
- 3.1 in
- Weight
- 2482.4 lb
SW345, 130 mm (5 in)
- Maximum Cutting Depth
- 17.7 in
- Wheel Width
- 5.1 in
- Weight
- 2239.9 lb
LR116
- Working Width
- 62 in
- Bucket Capacity - Struck
- 0.4 yd³
- Weight
- 1311.7 lb
LR119
- Working Width
- 74.1 in
- Bucket Capacity - Struck
- 0.4 yd³
- Weight
- 1439.6 lb
1148 mm (45 in)
- Length
- 38.7 in
- Height
- 23.4 in
- Overall Width
- 45.2 in