Cat® C2.8 Industrial Power Unit

Cat® C2.8 Industrial Power Unit

The C2.8 and C3.6 IPU engines are common rail direct injection engines with a turbocharged or turbocharged aftercooled air system meeting EU Stage V, U.S. EPA Tier 4 Final and Japan 2014 (Tier 4 Final) emission standards. For ease of installation, the IPU provides full aftertreatment mounting, an integrated cooling system, a full wiring harness and mounting for the ECM and fuel filter.

Designed to meet EU Stage V/U.S. EPA Tier 4 Final/ Japan 2014 (Tier 4 Final) emission standards.

Maximum Power
74 HP
Maximum Torque
221 lb-ft @ 1600 rpm
Emissions
EU Stage V/U.S. EPA Tier 4 Final/ Japan 2014 (Tier 4 Final)
Rated Speed
2200-2400 rpm

Power Rating

Maximum Power
74HP
Maximum Torque
221lb-ft @ 1600 rpm
Rated Speed
2200-2400 rpm
Minimum Power
74HP

Emission Standards

Emissions
EU Stage V/U.S. EPA Tier 4 Final/ Japan 2014 (Tier 4 Final)

General

Number of Cylinders
4 inline
Cycle
4 stroke
Bore
3.54in
Stroke
4.33in
Displacement
170.9in³
Compression Ratio
17.0:1
Aspiration
Turbocharged
Combustion System
Direct injection
Rotation from Flywheel End
Anti-clockwise
Aftertreatment
DOC+DPF
Cooling System
Liquid

Engine Dimensions*

Length
46.9in
Width
31.9in
Height
38in
Dry Weight
1126lb

Disclaimer

Note 1
*Final dimensions dependent on selected options

Standard Equipment:

  • Aftertreatment Equipment
    • Aftertreatment mounted on engine as standard
  • Air System
    • Standard and heavy duty air cleaners
  • Cooling System
    • 50:50 water glycol mix
    • Detailed guidance on cooling system design and validation available to ensure machine reliability
    • Engine mounted radiator with top tank temperature of 108°C (226°F)
    • Pusher or puller fan options
    • Radiator erosion screen is available
  • Electrical And Electronics
    • 12V system
    • Data interface via CANbus J1939
    • Instrument control panel available
    • Full electronic control
    • Glow plugs for best cold starting with minimum battery impact
    • High power alternator and starter motor options
    • Sensors and robust wiring harness included
  • Flywheel And Flywheel Housing
    • SAE3 flywheel housing and flywheel with pilot bore
    • Wide choice of interfaces for common transmissions and hydraulic pumps
  • Fuel System
    • Electronic high pressure common rail
    • Fuel filter - IOPU mounted
    • Standard and heavy duty fuel filtration
    • Water sensor included - early warning for operator
  • General
    • Cold-start capable with standard equipment to -25°C
    • Supplied painted or lacquered
  • Oil System
    • Oil filters - mounting options available on either side of the engine, plus remote
    • Dipsticks - choice of position and length
    • High incline sump. 35° continuous in all directions. Suitable for machines that are used on steep slopes
  • Power Take-off (pto)
    • SAE-A and SAE-B interfaces available

Optional Equipment:

Specifications

Power Rating

Maximum Power
74HP
Maximum Torque
221lb-ft @ 1600 rpm
Rated Speed
2200-2400 rpm
Minimum Power
74HP

Emission Standards

Emissions
EU Stage V/U.S. EPA Tier 4 Final/ Japan 2014 (Tier 4 Final)

General

Number of Cylinders
4 inline
Cycle
4 stroke
Bore
3.54in
Stroke
4.33in
Displacement
170.9in³
Compression Ratio
17.0:1
Aspiration
Turbocharged
Combustion System
Direct injection
Rotation from Flywheel End
Anti-clockwise
Aftertreatment
DOC+DPF
Cooling System
Liquid

Engine Dimensions*

Length
46.9in
Width
31.9in
Height
38in
Dry Weight
1126lb

Disclaimer

Note 1
*Final dimensions dependent on selected options

Standard/Optional Features

Standard Equipment:

  • Aftertreatment Equipment
    • Aftertreatment mounted on engine as standard
  • Air System
    • Standard and heavy duty air cleaners
  • Cooling System
    • 50:50 water glycol mix
    • Detailed guidance on cooling system design and validation available to ensure machine reliability
    • Engine mounted radiator with top tank temperature of 108°C (226°F)
    • Pusher or puller fan options
    • Radiator erosion screen is available
  • Electrical And Electronics
    • 12V system
    • Data interface via CANbus J1939
    • Instrument control panel available
    • Full electronic control
    • Glow plugs for best cold starting with minimum battery impact
    • High power alternator and starter motor options
    • Sensors and robust wiring harness included
  • Flywheel And Flywheel Housing
    • SAE3 flywheel housing and flywheel with pilot bore
    • Wide choice of interfaces for common transmissions and hydraulic pumps
  • Fuel System
    • Electronic high pressure common rail
    • Fuel filter - IOPU mounted
    • Standard and heavy duty fuel filtration
    • Water sensor included - early warning for operator
  • General
    • Cold-start capable with standard equipment to -25°C
    • Supplied painted or lacquered
  • Oil System
    • Oil filters - mounting options available on either side of the engine, plus remote
    • Dipsticks - choice of position and length
    • High incline sump. 35° continuous in all directions. Suitable for machines that are used on steep slopes
  • Power Take-off (pto)
    • SAE-A and SAE-B interfaces available

Optional Equipment: