Cat® C13B Diesel Engine

Cat® C13B Diesel Engine

The Cat® C13B engine supplies remarkable power and torque in a smaller, lighter engine package. With a aftertreatment that is 65% smaller and 54% lighter than its current equivalent and over 34 kW/L of power density, the C13B is designed to allow OEMs to downsize their engine platforms, lower installation costs and maximize uptime by providing long life in the toughest applications.

Maximum Power
577 HP
Maximum Torque
1943 lb-ft @ 1400 rpm
Emissions
EU Stage V
Rated Speed
1800-2100 rpm

Power Rating

Maximum Power
577HP
Maximum Torque
1943lb-ft @ 1400 rpm
Rated Speed
1800-2100 rpm
Minimum Power
456HP

Emission Standards

Emissions
EU Stage V

General

Engine Configuration
In-Line 6
Bore
5.1in
Stroke
6.2in
Displacement
762.8in³
Compression Ratio
15.8:1
Aspiration
Turbocharged-Aftercooled (TA)
Combustion System
Direct Injection
Rotation from Flywheel End
Counterclockwise
Aftertreatment
DOC+DPF+SCR

Engine Dimensions - Approximate

Length
50in
Width
39in
Height
45in
Weight - Net Dry - Basic Operating Engine Without Optional Attachments
2480lb

Aftertreatment Dimensions

Length
35.3in
Width
31.8in
Height
18.1in
Weight
220lb

Standard Equipment:

  • Air Inlet System
    • Turbocharged
    • Air-to-Air Aftercooled
    • Front or rear exhaust configurations available
  • Control System
    • Electronic control system
    • Over-foam wiring harness
    • Automatic altitude compensation
    • Power compensated for fuel temperature
    • Configurable software features
    • Engine monitoring system SAE J1939 broadcast and control
    • Integrated Electronic Control Unit (ECU)
    • Remote fan control
  • Cooling System
    • Vertical or RH thermostat outlet
    • Centrifugal water pump
    • Guidance on cooling system design available through your dealer to ensure equipment reliability
  • Flywheels And Flywheel Housing
    • Available SAE No. 1 power take-off with optional SAE B or SAE C power take-off drives. Engine power can also be taken from the front of the engine with optional attachments.
  • Fuel System
    • Mechanical Electronic Unit Injector fuel system (MEUI-C)
    • Primary fuel filter
    • Secondary and tertiary fuel filters
    • Fuel transfer pump
    • Electronic fuel priming
  • Lube System
    • Open crankcase ventilation system
    • Oil cooler
    • Oil filler
    • Lube oil filter
    • Oil dipstick
    • Gear driven oil pump
    • Choice of front, rear or center sumps
    • Open crankcase ventilation system with fumes disposal (OCV filter system required for EU Stage V certification engines)
  • Power Take Off (pto)
    • SAE B or SAE C power take off (PTO) drives. Engine power can also be taken from the front of the engine on some applications.
  • General
    • Caterpillar yellow paint, with optional colors available at request
    • Vibration damper
    • Lifiting eyes

Optional Equipment:

Specifications

Power Rating

Maximum Power
577HP
Maximum Torque
1943lb-ft @ 1400 rpm
Rated Speed
1800-2100 rpm
Minimum Power
456HP

Emission Standards

Emissions
EU Stage V

General

Engine Configuration
In-Line 6
Bore
5.1in
Stroke
6.2in
Displacement
762.8in³
Compression Ratio
15.8:1
Aspiration
Turbocharged-Aftercooled (TA)
Combustion System
Direct Injection
Rotation from Flywheel End
Counterclockwise
Aftertreatment
DOC+DPF+SCR

Engine Dimensions - Approximate

Length
50in
Width
39in
Height
45in
Weight - Net Dry - Basic Operating Engine Without Optional Attachments
2480lb

Aftertreatment Dimensions

Length
35.3in
Width
31.8in
Height
18.1in
Weight
220lb

Standard/Optional Features

Standard Equipment:

  • Air Inlet System
    • Turbocharged
    • Air-to-Air Aftercooled
    • Front or rear exhaust configurations available
  • Control System
    • Electronic control system
    • Over-foam wiring harness
    • Automatic altitude compensation
    • Power compensated for fuel temperature
    • Configurable software features
    • Engine monitoring system SAE J1939 broadcast and control
    • Integrated Electronic Control Unit (ECU)
    • Remote fan control
  • Cooling System
    • Vertical or RH thermostat outlet
    • Centrifugal water pump
    • Guidance on cooling system design available through your dealer to ensure equipment reliability
  • Flywheels And Flywheel Housing
    • Available SAE No. 1 power take-off with optional SAE B or SAE C power take-off drives. Engine power can also be taken from the front of the engine with optional attachments.
  • Fuel System
    • Mechanical Electronic Unit Injector fuel system (MEUI-C)
    • Primary fuel filter
    • Secondary and tertiary fuel filters
    • Fuel transfer pump
    • Electronic fuel priming
  • Lube System
    • Open crankcase ventilation system
    • Oil cooler
    • Oil filler
    • Lube oil filter
    • Oil dipstick
    • Gear driven oil pump
    • Choice of front, rear or center sumps
    • Open crankcase ventilation system with fumes disposal (OCV filter system required for EU Stage V certification engines)
  • Power Take Off (pto)
    • SAE B or SAE C power take off (PTO) drives. Engine power can also be taken from the front of the engine on some applications.
  • General
    • Caterpillar yellow paint, with optional colors available at request
    • Vibration damper
    • Lifiting eyes

Optional Equipment: