fbpx

Cat® C1.5 Industrial Power Unit

Cat® C1.5 Industrial Power Unit

The Cat® C1.5 Industrial Power Unit is offered in the following rating: 27 bkW (36 bhp) @ 2800 rpm. This rating meets U.S. EPA Tier 4 Final emission standards. Rating: 24.2 bkW (32.5 bhp) @ 3000 meets EU Stage IIIA (U.S. EPA Tier 4 Interim) emission standards. Conveniently pre-configured for a wide range of applications, the Cat® Industrial Power Unit is a complete power package containing a radiator, flywheel, alternator and alternator wiring completely pre-assembled for fast, straightforward installation in a number of OEM, customer and packager applications. These fuel efficient units are ready made for irrigation, industrial, mining and other pump applications.

Maximum Power
36 HP
Maximum Torque
69.6 lb-ft @ 1800 rpm
Emissions
U.S. EPA Tier 4 Final or EU Stage IIIA
Rated Speed
2800-3000 rpm

Power Rating

Maximum Power
36HP
Maximum Torque
69.6lb-ft @ 1800 rpm
Rated Speed
2800-3000 rpm
Minimum Power
33.7HP

Emission Standards

Emissions
U.S. EPA Tier 4 Final or EU Stage IIIA

General

Engine Configuration
Inline 3, 4-Stroke-Cycle Diesel
Bore
3.3in
Stroke
3.5in
Displacement
91in³
Compression Ratio
22.5:1
Aspiration
Naturally Aspirated (NA)
Rotation from Flywheel End
Counterclockwise
Aftertreatment
-

Power Unit Dimensions

Length
32.3in
Width
19.6in
Height
31.2in
Weight
386lb

Aftertreatment Dimensions

Weight
28.7lb

Standard Equipment:

  • Air Inlet System
    • Inlet manifold
  • Control System
    • Alternator 12 volt 65 amp
    • Starter motor 12 volt
    • Glow plug starting aid
    • Tier 4 Final: Alternator 12V 85 amp
  • Cooling System
    • Belt-driven coolant pump
    • Coolant temperature switch
    • Mounted air cleaner
    • Mounted radiator and fan
  • Flywheel & Flywheel Housing
    • Naturally Aspirated: SAE No. 7 1/2 flywheel
    • Choice of SAE No. 4, SAE No. 5 or standard backplate flywheel housing
  • Fuel System
    • Fuel injection pump
    • Fuel filter
    • Electronic Shut-off Solenoid (ESOS)
  • Lube System
    • Spin-on lube oil filter
    • Lube oil pressure switch
    • Lube oil sump
  • Power Take Off (pto)
    • Provision for timing case rear facing PTO
  • General
    • Cast iron, engine block
    • Cast iron exhaust manifold--side outlet
    • Cold start capability to -20° C (-4° F)
    • Gradeability 35° continuous
    • Paint: Caterpillar yellow, with optional colors available at request
  • Tier 4 Final Aftertreatment / Clean Emissions Control Equipment
    • Diesel Particulate Filter (DPF)
    • Diesel Oxidation Catalyst (DOC)
    • Passive regeneration system with backup

Optional Equipment:

Specifications

Power Rating

Maximum Power
36HP
Maximum Torque
69.6lb-ft @ 1800 rpm
Rated Speed
2800-3000 rpm
Minimum Power
33.7HP

Emission Standards

Emissions
U.S. EPA Tier 4 Final or EU Stage IIIA

General

Engine Configuration
Inline 3, 4-Stroke-Cycle Diesel
Bore
3.3in
Stroke
3.5in
Displacement
91in³
Compression Ratio
22.5:1
Aspiration
Naturally Aspirated (NA)
Rotation from Flywheel End
Counterclockwise
Aftertreatment
-

Power Unit Dimensions

Length
32.3in
Width
19.6in
Height
31.2in
Weight
386lb

Aftertreatment Dimensions

Weight
28.7lb

Standard/Optional Features

Standard Equipment:

  • Air Inlet System
    • Inlet manifold
  • Control System
    • Alternator 12 volt 65 amp
    • Starter motor 12 volt
    • Glow plug starting aid
    • Tier 4 Final: Alternator 12V 85 amp
  • Cooling System
    • Belt-driven coolant pump
    • Coolant temperature switch
    • Mounted air cleaner
    • Mounted radiator and fan
  • Flywheel & Flywheel Housing
    • Naturally Aspirated: SAE No. 7 1/2 flywheel
    • Choice of SAE No. 4, SAE No. 5 or standard backplate flywheel housing
  • Fuel System
    • Fuel injection pump
    • Fuel filter
    • Electronic Shut-off Solenoid (ESOS)
  • Lube System
    • Spin-on lube oil filter
    • Lube oil pressure switch
    • Lube oil sump
  • Power Take Off (pto)
    • Provision for timing case rear facing PTO
  • General
    • Cast iron, engine block
    • Cast iron exhaust manifold--side outlet
    • Cold start capability to -20° C (-4° F)
    • Gradeability 35° continuous
    • Paint: Caterpillar yellow, with optional colors available at request
  • Tier 4 Final Aftertreatment / Clean Emissions Control Equipment
    • Diesel Particulate Filter (DPF)
    • Diesel Oxidation Catalyst (DOC)
    • Passive regeneration system with backup

Optional Equipment: