Buy Parts View Specs Locations Contact Us Careers Email Signup

Industrial Diesel Power Units

Cat® C1.1 Industrial Power Unit

Minimum Power 19.3 bhp
Maximum Power 26.4 bhp
Emissions 14.4-18.4 bkW (19-24.7 bhp) meet U.S. EPA Tier 4 Final. Other ratings available for Europe and other regions.
Rated Speed 3000 rpm

The Cat® C1.1 Industrial Power Unit is offered in ratings ranging from 14.4-18.4 bkW/19.3-24.7 bhp @ 2200-2800 rpm. These ratings meet U.S. EPA Tier 4 Final emission standards. Ratings: 17.3-18.1 bkW (23.2-24.3 bhp) @ 2800-3000 rpm are available for Europe and, depending on applicable emission standards, may be introduced in other regulated areas. Nonroad engines less than 19 kW (25 hp) are not currently subject to EU emission standards. Conveniently pre-configured for a wide range of applications, the Cat® Industrial Power Unit is a complete power package containing a radiator, flywheel, alternator and alternator wiring completely pre-assembled for fast, straightforward installation in a number of OEM, customer and packager applications. These fuel efficient units are ready made for irrigation, industrial, mining and other pump applications.

Power Rating

Minimum Power
19.3bhp
Maximum Power
26.4bhp
Rated Speed
3000 rpm
Minimum Power
19.3HP
Maximum Power
24.7HP
Rated Speed
3000 rpm
Maximum Torque
47.6lb-ft @ 2100 rpm

Emission Standards

Emissions
14.4-18.4 bkW (19-24.7 bhp) meet U.S. EPA Tier 4 Final. Other ratings available for Europe and other regions.
Emissions
14.4-18.4 bkW (19-24.7 bhp) meet U.S. EPA Tier 4 Final. Other ratings available for Europe and other regions.

General

Engine Configuration
Inline 3, 4-Stroke-Cycle Diesel
Bore
77 mm (3.03 in)
Stroke
81 mm (3.19 in)
Displacement
1.131 L (69 in³)
Aspiration
Naturally Aspirated (NA)
Compression Ratio
23:1
Rotation (from flywheel end)
Counterclockwise
Cooling System Capacity
5.21 L (5.5 qt)
Lube System (refill)
4.9 L (5.2 qt)
Engine Configuration
Inline 3, 4-Stroke-Cycle Diesel
Bore
77 mm (3.03 in)
Stroke
81 mm (3.19 in)
Displacement
1.131 L (69 in³)
Aspiration
Naturally Aspirated (NA)
Compression Ratio
23.0:1
Rotation from Flywheel End
Counterclockwise
Cooling System - Capacity
5.21 L (5.5 qt)
Lube System - Refill
4.9 L (5.2 qt)
Bore
3in
Stroke
3.2in
Displacement
69in³
Aftertreatment
-

Power Unit Dimensions - Approximate

Length
778 mm (30.6 in)
Width
438 mm (17.2 in)
Height
730 mm (28.7 in)
Weight - Approximate, Net Dry - Standard Configuration Without Oil, Cooling, Clutch, Compressor, A/C
129 kg (284 lb)

Power Unit Dimensions

Weight
284lb
Width
17.2in
Length
30.6in
Height
28.7in

Standard Equipment:

  • Air Inlet System
    • Inlet manifold
  • Control System
    • Alternator 12 volt 65 amp
    • Starter motor 12 volt
    • Glow plug starting aid
  • Cooling System
    • Belt-driven coolant pump
    • Coolant temperature switch
    • Mounted radiator and fan
  • Flywheel And Flywheel Housing
    • SAE No. 6 1/2 flywheel
    • SAE No. 5 flywheel housing
    • U.S. EPA Tier 4 Final: Standard backplate flywheel housing and flatface flywheel
  • Fuel System
    • Fuel injection pump
    • Fuel filter
  • Lube System
    • Spin-on lube oil filter
    • Lube oil pressure switch
    • Lube oil sump
  • Power Take Off (pto)
    • Provision for timing case rear facing PTO
  • General
    • Cast iron, engine block
    • Cast iron exhaust manifold--side outlet
    • Cold start capability to -20° C (-4° F)
    • Paint: Caterpillar yellow, with optional colors available at request