fbpx

C18 Generator Set

Caterpillar is leading the power generation marketplace with Power Solutions engineered to deliver unmatched flexibility, expandability, reliability, and cost-effectiveness.

Maximum Rating
715 kVA
Minimum Rating
550 kVA
Emissions/Fuel Strategy
Low Fuel, EU Stage IIIA
Voltage
380 to 415 Volts

Generator Set Specifications

Maximum Rating
715 kVA
Minimum Rating
550 kVA
Emissions/Fuel Strategy
Low Fuel, EU Stage IIIA
Voltage
380 to 415 Volts
Frequency
50 Hz
Speed
1500 rpm
Duty Cycle
Standby, Prime

Engine Specifications

Engine Model
C18 ATAAC, I-6, 4-Stroke Water-Cooled Diesel
Bore
5.71in
Stroke
7.2in
Displacement
1106.4in³
Compression Ratio
14.5:1
Aspiration
Air to Air Aftercooled
Fuel System
Electronic unit injection
Governor Type
Adem™A4

Generator Set Dimensions

Length - Minimum
218.5in
Length - Maximum
218.5in
Width - Maximum
80.9in
Height - Maximum
107.8in

Standard Equipment:

  • Air System
    • Air cleaner, light duty
    • Turborcharger
  • Air Inlet
    • Air cleaner
  • Control Panel
    • GCCP 1.3
    • GCCP Genset Controller
  • Cooling
    • Package mounted radiator
  • Cooling System
    • Coolant drain line with valve
    • Fan drive, battery charging alternator drive
    • Radiator and cooling fan with guard
    • Caterpillar extended life coolant
  • Exhaust
    • Exhaust flange outlet
  • Exhaust System
    • Stainless steel exhaust flex, gaskets, raincap and SAE exhaust flange for customer use - shipped loose
  • Fuel System
    • Standard open set fuel tank/base supplied Base, formed steel with single wall integral 8-hour fuel tank
  • Fuel
    • Fuel priming pump
    • Secondary fuel filters
    • Primary fuel filter with integral water separator
  • Generator
    • Matched to the performance and output characteristics of Cat engines
    • IP23 Protection
    • Load adjustment module provides engine relief upon load impact and improves load acceptance and recovery time
  • Generator And Attachments
    • Segregated low voltage (AC/DC) wiring panel
    • Power center, IP22
    • Optional LC Frame generator - IP23 Protection,
    • Mandatory option rear circuit breaker, IEC, 3 pole, mounted in power center
    • Integrated voltage regulator (IVR)
    • A Frame generator - IP21 Protection
  • Governing System
    • Cat electronic governor (ADEM A4)
  • Power Termination
    • Busbar
  • Lube System
    • Oil drain valves
    • Lubricating oil
  • Mounting System
    • Captive linear vibration isolators between base and engine-generator includes lifting provisions and termination points for coolant and lube oil drain lines
  • Starting / Charging
    • 24 Volt battery with rack and cables
  • Starting/charging
    • 24 volt starting motor
    • Batteries
  • Mounting
    • Rubber vibration isolators
  • General
    • Engine and alternator pre-paint, Caterpillar yellow
    • Paint - Caterpillar yellow except rails and radiators gloss black

Optional Equipment:

  • Certifications
    • Global
    • European Certifications - EU Certificate of Conformance (CE)
  • Exhaust
    • Industrial, residential, critical mufflers
  • Air Inlet System
    • Dual element air cleaner
    • Single element air cleaner
  • Generator
    • Oversize and premium generators
    • Excitation: [ ] Permanent magnet excitation (PMG) Excited (PM) [ ] Internally Excited (IE)
    • Anti-condensation heater
  • Power Termination
    • Circuit breakers, IEC compliant
    • Circuit breakers, UL listed
  • Circuit Breakers
    • 4 Pole (IEC-100% rated) - package mounted
    • 3 Pole (IEC-100% rated) - package mounted
    • Padlockable device
    • 4 Pole (IEC-100% rated) - motorized
    • Power terminal strip
    • 3 Pole (IEC-100% rated) - motorized
  • Control Panel
    • GCCP 1.4
  • Control Panels
    • Local & remote annunciator modules
    • Digital I/O module
    • Load share module
    • EMCP (4.2) (4.3) (4.4)
    • Remote monitoring software
  • Control System
    • Local alarm modules
    • Control panel protective devices
    • Remote annunciator module
    • Volt free contacts
  • Cooling System
    • Radiator duct flange
  • Enclosures
    • Sound attenuated enclosures
  • Starting/charging
    • Heavy duty starting system
    • Battery chargers
    • Charging alternator
    • Oversize batteries
    • Jacket water heater
  • Exhaust System
    • Elbow Kit
    • Mufflers - End in/end out
    • Manifold and turbocharger guards
    • Engine mounted muffler
    • Flange groups; 8 and 10 inch weld flanges and gaskets
  • Fuel System
    • Integral dual wall fuel tank base
    • Manual fuel transfer system
    • Fuel transfer system
  • General
    • Integral & sub-base UL listed dual wall fuel tanks
    • UL 2200 package
    • Narrow, wide or skid base
    • Enclosures: Sound attenuated, weather protective
    • Sound attenuated, weather protective or high ambient weather protective enclosure
    • EEC Declaration of Conformity
    • Seismic Certification per applicable building codes: IBC 2000, IBC 2003, IBC 2006, IBC 2009, CBC 2007
    • The following options are based on regional and product configuration:
    • Single or dual wall sub-base fuel tanks
    • Automatic transfer switches (ATS)
    • CSA Certification
    • EU Certificate of Conformance (CE)
    • Single or dual wall integral fuel tanks
  • Generator And Attachments
    • A Frame CIP generator
    • LC frame generator
    • Permanent magnet excitation (PMG)
    • LC frame oversize generator
    • Space heaters
    • Ingress protection
    • LC frame CIP generator
    • A Frame oversize generator
  • Lube System
    • Manual sump pump
  • Mounting System
    • Narrow skid base
  • Starting / Charging System
    • 5 Amp Battery charger
    • Jacket water heater
    • Battery disconnect switch

C13, C15, C18 SA enclosure. 350-600 kW 60 Hz

Length
C13 - 5461 mm, C15 - 4948 mm, C18 - 5187 mm
Width
C13, C15 & C18 - 2014 mm
Height
C13 - 2743 mm, C15 - 2619 mm, C18 - 2561 mm

C18 Sound Attenuated Enclosure 50 and 60 Hz

Weight
5952 kg
Width
1920 mm
Length
5320 mm

C13, C15, C18 WP Enclosure. 350-600 kW 60 Hz

Height
2320 - 3209 mm
Length
4948 - 7271 mm
Width
2014 - 2056 mm

Specifications

Standard/Optional Features

Attachments