Caterpillar is leading the power generation marketplace with Power Solutions engineered to deliver unmatched flexibility, expandability, reliability, and cost-effectiveness.
|
|
|
|
|
|
|
|
Generator Set Specifications
- Maximum Rating
- 400 ekW
- Minimum Rating
- 320 ekW
- Emissions/Fuel Strategy
- Low Fuel Consumption
- Voltage
- 380 to 415 Volts
- Frequency
- 60 Hz
- Speed
- 1800 rpm
- Duty Cycle
- Standby, Prime
Engine Specifications
- Engine Model
- C13 ATAAC, I-6, 4-Stroke Water-Cooled Diesel
- Bore
- 5.12in
- Stroke
- 6.18in
- Displacement
- 762.8in³
- Compression Ratio
- 16.3:1
- Aspiration
- Air to Air Aftercooled
- Fuel System
- MEUI
- Governor Type
- Adem™A4
Generator Set Dimensions
- Length - Maximum
- 186.7in
- Width - Maximum
- 79.3in
- Height - Maximum
- 84in
Standard Equipment:
-
- Air Inlet System
-
- Aftercooler core
- Air cleaner; light duty with disposable paper filter
- Turbocharger
-
- Control Panel
-
- GCCP 1.3
-
- Cooling System
-
- Caterpillar extended life coolant
- Coolant drain line with valve
- Fan drive, battery charging alternator drive
- Radiator and cooling fan with guard
-
- Exhaust System
-
- Stainless steel exhaust flex, gaskets, raincap & SAE exhaust flange for customer use - shipped loose
-
- Fuel System
-
- Base, formed steel with single wall integral 8-hour fuel tank
- Standard open set fuel tank/base supplied
-
- Generator And Attachments
-
- Segregated low voltage (AC/DC) wiring panel
- Power center, IP22
- Integrated voltage regulator (IVR)
- Mandatory option circuit breaker, IEC, 3 pole, mounted in power centre
- A Frame generator - IP21 Protection
- Optional LC Frame generator - IP23 Protection
-
- Governing System
-
- Cat electronic governor (ADEM A4)
-
- Packaged Generator Set
-
- Service indicator
- Radiator package mounted
- Low coolant level sensor
- Coolant drain line with valve
- Coolant level sight gauge
- Disposable air filter
-
- Lube System
-
- Lubricating oil
- Oil drain valves
- Oil cooler
-
- Mounting System
-
- Captive linear vibration isolators between base and engine-generator
- Includes lifting provisions and termination points for coolant and lube oil drain lines
-
- Starting / Charging System
-
- 24V battery with rack and cables
-
- General
-
- Engine and alternator pre-paint, Caterpillar yellow
Optional Equipment:
-
- European Certificates
-
- EU Certificate of Conformance (CE)
- Global Certification for CIS
-
- Air Inlet System
-
- Single element air cleaner
- Dual element air cleaner
-
- Circuit Breakers
-
- 4 Pole (IEC-100% rated) Circuit breaker
- Circuit breaker (IEC) Auxiliary contacts
- 4 Pole (IEC-100% rated) Circuit breaker - Motorised
- Padlockable circuit breaker device
- Power terminal strip
- Shunt trip for IEC circuit breaker
- 3 Pole (IEC-100% rated) Circuit breaker
- 3 Pole (IEC-100% rated) Circuit breakers - Motorised
-
- Control Panels
-
- GCCP 1.4
- Local alarm modules: Local annunciator
- Volt free contacts
- Control panel protective devices: Earth fault relay ; Earth leakage ground fault ; Overload shutdown via breaker ; Low fuel level alarm ; Low fuel level shutdown ; High fuel level alarm ; Fuel level sensor
- Remote annunciator module
-
- Cooling System
-
- Stone guards
- Radiator duct flange
- Low coolant temperature alarm
-
- Enclosures
-
- Sound attenuated enclosures
- High ambient sound attenuated enclosures
-
- Exhaust System
-
- 6 and 8 inch elbow kit
- Flexible 8 inch exhaust fittings
- 6 and 8 inch flange GP
- Mufflers - End in/end out
- 10, 25 and 35 dBA attenuation
-
- Fuel System
-
- Manual fuel transfer pump
- Integral dual wall fuel tank base
- Fuel transfer system controls
-
- Generator And Attachments
-
- Permanent magnet excitation (PMG) generator
- LC frame generator
- LC CIP generator
- A Frame CIP generator
- A Frame oversize generator
- Ingress protection
- Space heaters
-
- Lube System
-
- Manual sump pump
-
- Mounting System
-
- Narrow skid base
-
- Starting / Charging System
-
- 5 Amp single Battery charger
- Jacket water heater
- Battery disconnect switch
C13, C15, C18 SA enclosure. 350-600 kW 60 Hz
- Length
- C13 - 5461 mm, C15 - 4948 mm, C18 - 5187 mm
- Width
- C13, C15 & C18 - 2014 mm
- Height
- C13 - 2743 mm, C15 - 2619 mm, C18 - 2561 mm
C13, C15, C18 WP Enclosure. 350-600 kW 60 Hz
- Height
- 2320 - 3209 mm
- Length
- 4948 - 7271 mm
- Width
- 2014 - 2056 mm
C13 Sound Attenuated Enclosure 50 and 60 Hz
- Length
- 4930 mm
- Height
- 2221 mm
- Width
- 1620 mm
Emergency Transfer Load manager
- Configuration
- Wall mounted paralleling control system that monitors and controls a single generator and a single utility.
- Modes of Operation
- Utility Import, Export, and base load operations, Peak shaving, and Emergency Standby. Closed Transition to/from Generator Power
- Application
- LV and MV (208V-32kV)