938M Small Wheel Loader

938M Small Wheel Loader

The Cat 938M Small Wheel Loader sets the standard for productivity, fuel efficiency and operator comfort. The improved optimized Z-bar loader linkage delivers the quick loading performance of a traditional Z-bar with the parallelism and load handling capability of a tool carrier. A high torque, low speed C7.1 ACERT engine works in concert with an intelligent hystat power train to deliver fuel efficiency as standard. Meets Tier 4 Final/Stage V emission standards with an environmentally friendly, Clean Emission Module designed to manage itself so you can concentrate on your work. Experience the new industry benchmark.

Maximum Gross Power
188 HP
Operating Weight
35778 lb
Bucket Capacities
2.5-5.0 m3 (3.2-6.5 yd3)
ROPS
ISO 3471:2008

Engine

Maximum Gross Power
188HP
Displacement (Performance Power Mode: Speed Range 1-4)
427in³
Maximum Gross Power - 1,800 rpm - ISO 14396 (DIN) (Performance Power Mode: Range 1-4)
190mhp
Note (1)
Net power ratings are tested at the reference conditions for the specified standard and denote power available at the flywheel when the engine is equipped with alternator, air cleaner, emission components and fan at specified speed.
Engine Model
Cat C7.1 ACERT**
Rated Net Power - 1,600 rpm - SAE J1349 at Minimum Fan Speed (Standard Power Mode: Range 1-3*)
170HP
Maximum Gross Power - 1,600 rpm - ISO 14396 (Standard Power Mode: Range 1-3*)
173HP
Note (2)
*Range 4 power and torque is equal to Performance Mode with Caterpillar Power by Range technology.
Note (3)
**The Cat C7.1 ACERT engine meets Tier 4 Final/Stage V off-highway emission standards.
Rated Net Power - 1,600 rpm - ISO 9249 at Minimum Fan Speed (Standard Power Mode: Range 1-3*)
170HP
Maximum Net Torque - ISO 9249:2007 (Standard Power Mode: Range 1-3*)
628ft·lbf
Rated Net Power - 1,800 rpm - ISO 9249 at Minimum Fan Speed (Performance Power Mode: Range 1-4)
184HP
Maximum Net Torque - ISO 9249:2007 (Performance Power Mode: Range 1-4)
650ft·lbf
Displacement (Standard Power Mode: Speed Range 1-3*)
427in³
Maximum Rated Gross Power - Maximum Engine Speed (Standard Power Mode: Range 1-3*)
1600r/min
Rated Net Power - 1,800 rpm - SAE J1349 at Minimum Fan Speed (Performance Power Mode: Range 1-4)
183HP
Maximum Gross Torque - ISO 14396 (Standard Power Mode: Range 1-3*)
642ft·lbf
Maximum Gross Power - 1,600 rpm - ISO 14396 (DIN) (Standard Power Mode: Range 1-3*)
176mhp
Maximum Net Torque - SAE J1349 (Performance Power Mode: Range 1-4)
649ft·lbf
Maximum Gross Power - 1,800 rpm - ISO 14396 (Performance Power Mode: Range 1-4)
188HP
Rated Net Power - 1,600 rpm - ISO 9249 (DIN) at Minimum Fan Speed (Standard Power Mode: Range 1-3*)
172mhp
Maximum Net Torque - SAE J1349 (Standard Power Mode: Range 1-3*)
627ft·lbf
Rated Net Power - 1,800 rpm - ISO 9249 (DIN) at Minimum Fan Speed (Performance Power Mode: Range 1-4)
186mhp
Maximum Rated Gross Power - Maximum Engine Speed (Performance Power Mode: Range 1-4)
1800r/min
Maximum Gross Torque - ISO 14396 (Performance Power Mode: Range 1-4)
664ft·lbf

Weights

Operating Weight
35778lb

Buckets

Bucket Capacities
2.5-5.0 m3 (3.2-6.5 yd3)
Bucket Capacities - Light Material
3.1-5.0 m³ (4.0-6.5 yd³)
Bucket Capacities - General Purpose
2.5-3.2 m³ (3.2-4.2 yd³)

Cab

ROPS
ISO 3471:2008
FOPS
ISO 3449:2008 Level II
Note (3)
*The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds.
Note (1)
Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Note (2)
The declared dynamic operator sound pressure levels per ISO 6396:2008*, when properly installed and maintained, are:
– Standard cab: 68 ±3 dB(A)
– Deluxe cab: 66 ±2 dB(A)

Service Refill Capacities

Transmission - Gear Box
2.9gal (US)
Engine Crankcase
5.3gal (US)
Hydraulic System - Including Tank
44.9gal (US)
Rear Axles
9.2gal (US)
Front Axles
9.2gal (US)
Diesel Exhaust Fluid (DEF) Tank
5gal (US)
Note
DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
Hydraulic Tank
23.8gal (US)
Fuel Tank
51.5gal (US)
Cooling System
7.9gal (US)

Loader Hydraulic System

Note (1)
*3rd and 4th function flow is fully adjustable from 20% to 100% of maximum flow through the secondary display, when equipped.
Hydraulic Cycle Time - Performance Mode at 1,800 rpm - Raise, Ground Level to Maximum Lift
5.5s
Hydraulic Cycle Time - Performance Mode at 1,800 rpm - Total Cycle Time
9.7s
Relief Pressure - Tilt Cylinder
4351psi
Hydraulic Cycle Time - Standard Mode at 1,600 rpm - Total Cycle Time
10.6s
Maximum Working Pressure - Implement Pump
4061psi
Relief Pressure - Tilt Cylinder - 3rd and 4th Function Maximum Working Pressure
4061psi
Hydraulic Cycle Time - Standard Mode at 1,600 rpm - Dump, at Maximum Lift Height
1.7s
Hydraulic Cycle Time - Performance Mode at 1,800 rpm - Dump, at Maximum Lift Height
1.5s
Hydraulic Cycle Time - Standard Mode at 1,600 rpm - Raise, Ground Level to Maximum Lift
6.2s
Hydraulic Cycle Time - Performance Mode at 1,800 rpm - Float Down, Maximum Lift to Ground Level
2.7s
Maximum Flow - Implement Pump - 4th Function Maximum Flow*
42gal/min
Relief Pressure - Tilt Cylinder - 3rd and 4th Function Relief Pressure
4351psi
Hydraulic Cycle Time - Standard Mode at 1,600 rpm - Float Down, Maximum Lift to Ground Level
2.7s
Maximum Flow - Implement Pump
50gal/min
Maximum Flow - Implement Pump - 3rd Function Maximum Flow*
50gal/min

Steering

Maximum Working Pressure - Steering Pump
3500psi
Steering Articulation Angle - Each Direction
40°
Maximum Flow - Steering Pump
34gal/min
Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left
3.3turns
Maximum Steering Torque - 0° (Straight Machine)
42506ft·lbf
Maximum Steering Torque - 40° (Full Turn)
31398ft·lbf
Steering Cycle Times - Full Left to Full Right - At 1,800 rpm: 90 rpm Steering Wheel Speed
2.3s

Transmission

Forward and Reverse - Range 3
17mile/h
Forward and Reverse - Range 4
25mile/h
Note
*Creeper control allows maximum speed range adjustability from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the secondary display, when equipped. Factory default is 7 km/h (4.4 mph).
Forward and Reverse - Range 1*
1-13 km/h (0.6-8 mph)
Forward and Reverse - Range 2
8mile/h

Sound

Note (1)
European Union Directive “2000/14/EC”
Average Exterior Sound Pressure (ISO 6395:2008)
101dB(A)
Operator Sound Pressure (ISO 6396:2008)
72dB(A)

Tires

Note (1)
Other tire choices are available. Contact your Cat dealer for details.
Standard Size
20.5 R25, radial (L-3)
Note (2)
In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities.
Other Choices Include
20.5 R25, radial (L-2); 20.5 R25, radial (L-5); 20.5-25 12PR (L-2); 20.5-25 12PR (L-3); 20.5-25 16PR (L-5); 23.5 R25, radial (L-3); 650/65 R25 radial (L-3); Skidder/Agriculture; Solid Tires
Note (3)
Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.

Axles

Rear
Oscillating ±11 degrees; Open differential (standard); Limited slip differential (optional)
Front
Fixed; Locking differential (standard)

Air Conditioning System

Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg of refrigerant which has a CO2 equivalent of 2.717 metric tonnes.

Standard Equipment:

  • Power Train
    • Auto idle shut down feature
    • Cat C7.1 ACERT engine
      – Power modes (Standard and Performance)
      – Power by range (High Power in Range 4)
      – Turbocharged and aftercooled
      – Filtered crankcase breather
      – Diesel particulate filter
      – Selective Catalyst Reduction
    • Coded start (requires secondary display)
    • Coolant protection to –34° C (–29° F)
    • Enclosed wet disc full hydraulic brakes
    • Fuel priming pump, automatic
    • Hydraulically driven demand cooling fan
    • Hydrostatic transmission with electronic control
      – Operator modes (Default, TC, Hystat, and Ice)
      – Directional Shift Aggressiveness (fast, medium, slow)
      – Rimpull control, adjust wheel torque
      – Creeper control, adjust ground speed
    • Parking brake, electric
    • Single plane cooling package wide six fins per inch density
    • Throttle lock and max speed limiter
  • Hydraulics
    • Automatic lift and bucket kickouts, adjustable in-cab
    • Bucket and fork modes, adjustable in-cab
    • Cylinder damping at kickout and mechanical end stops
    • Fine mode control (fast, medium, slow) in fork mode
    • Hydraulic response setting (fast, medium, slow)
    • Hydraulic diagnostic connectors and S·O·SSM ports
    • Load sensing hydraulics and steering
  • Electrical
    • Alternator, 115 amp, heavy duty
    • 12V power supply in cab (2)
    • Batteries, 1,000 CCA (2) 24V system, disconnect switch
    • Back-up alarm
    • Emergency shutdown switch
    • Halogen work and roading lights, LED rear tail lights
    • Product Link PRO with three year subscription
    • Remote jump start post
    • Resettable main and critical function breakers
  • Operator Environment
    • 75 mm (3 in) retractable seat belt, with audible alarm and indicator
    • Automatic temperature control
    • External heated mirrors with lower parabolic
    • Hydraulic control lockout
    • Interior cab lighting, door and dome
    • Interior rearview mirrors (2)
    • Lunch box storage
    • Radio ready speakers
    • Rear window defrost, electric
    • Seat-mounted electronic implement controls, adjustable
    • Column mounted multi function control – lights, wipers, turn signal
    • Tilt and telescopic steering wheel
    • Tinted front glass
    • Wet arm wiper/washer, 2-speed and intermittent, front
  • Other Standard Equipment
    • Large-access enclosure doors with adjustable close/open force
    • Parallel lift loader linkage
  • Eu Standard Equipment
    • Deluxe cab
    • Secondary display
    • Rearview camera

Optional Equipment:

  • Optional Equipment
    • Autolube, integrated in secondary display
    • Auxiliary flow, third and fourth function, adjustable through secondary display
    • Beacon light, strobe
    • Cab, deluxe (standard in Europe, optional in North America)
      – Electrically adjustable external heated mirrors (2)
      – Secondary display to enable features and adjust parameters
      – Sunscreen, front and rear
    • Camera, rearview (standard in Europe)
    • Cold start package
    • Counterweight, (heavy and logger)
    • Coupler, (Fusion and ISO 23727)
    • Debris packages (low, medium, high)
    • Fenders (extended cover and full coverage)
    • Guarding (machine and operator)
    • Linkage, high lift
    • Lights, auxiliary, halogen or LED with engine and DEF compartment lights
    • Object Detection
    • Product Link ELITE with capabilities for software push, data logging, histogram and trend mapping
    • Radio packages
    • Ride Control System, adjustable through secondary display
    • Seats
      – Deluxe seat – fully adjustable fabric air suspension seat with mid backrest and mechanical lumbar support
      – Premium seat – fully adjustable leather and fabric air suspension with high backrest and air lumbar support. Seat is heated and ventilated on bottom cushion and backrest.
    • Steering
      – Dual mode and secondary
    • NOTE: Not all features are available in all regions.

5.0 m3 (6.5 yd3) Pin On Light Material Bucket

Width
107.4 in
Height
65.4 in
Weight
3038 lb

4.2 m3 (5.5 yd3) Pin On Light Material Bucket

Width
107.4 in
Height
59.8 in
Weight
2896.9 lb

3.8 m3 (5.0 yd3) Pin On Light Material Bucket

Width
107.4 in
Height
57.2 in
Weight
2738.1 lb

3.8 m3 (5.0 yd3) Pin On Light Material Bucket

Width
107.4 in
Height
57.2 in
Weight
2742.5 lb

3.8 m3 (5.0 yd3) Fusion™ Coupler Light Material Bucket

Width
107.4 in
Height
57 in
Weight
2696.3 lb

3.5 m3 (4.6 yd3) Pin On Light Material Bucket

Width
107.4 in
Height
56 in
Weight
2597 lb

3.0 m3 (3.9 yd3) Fusion™ Coupler Light Material Bucket

Width
107.4 in
Height
52.9 in
Weight
2370 lb

BA25 Manual Angle Broom

Overall Width
106.3 in
Sweeping Width
98.4 in
Brush Diameter
27.6 in

BA30 Hydraulic Angle Broom 24V with Water

Overall Width
126 in
Sweeping Width
118.1 in
Brush Diameter
36 in

BA25 Manual Angle Broom

Overall Width
106.3 in
Sweeping Width
98.4 in
Brush Diameter
27.6 in

4.87 m (16 ft) Straight Snow Push with rubber with trip edge trip edge

Working Width
192 in
Weight
3112.9 lb
Length
76.6 in

4.87 m (16 ft) Straight Snow Push with rubber with trip edge trip edge

Working Width
192 in
Weight
3249.6 lb
Length
62 in

4.26 m (14 ft) Straight Snow Push with rubber with trip edge trip edge

Working Width
168 in
Weight
2879.2 lb
Length
76.6 in

4.26 m (14 ft) Straight Snow Push with rubber with trip edge trip edge

Working Width
168 in
Weight
3018.1 lb
Length
62 in

3.66 m (12 ft) Straight Snow Push with rubber with trip edge trip edge

Working Width
144 in
Weight
2634.5 lb
Length
76.6 in

3.66 m (12 ft) Straight Snow Push with rubber trip edge

Working Width
144 in
Weight
2782.2 lb
Length
62 in

3941 mm (155 in) Material Handling Arms – Loader

Overall Width
25.4 in
Maximum Load Rating
4618.7 lb
Maximum Horizontal Reach
155.2 in

1812 mm (71 in) Fusion™ Coupler Sorting Grapple Fork

Width
71.3 in
Tine Length
50 in
Grapple Area
20.6 ft²

1812 mm (71 in) ISO Coupler Sorting Grapple Fork

Width
71.3 in
Tine Length
49.4 in
Grapple Area
20.6 ft²

1524 mm (60 in) Fusion™ Coupler Semi Millyard Fork

Width
84 in
Tine Spacing - Maximum Width
82.1 in
Tine Spacing - Minimum Width
60.9 in

1219 mm (48 in) Pin On Semi Millyard Fork

Width
70 in
Tine Spacing - Maximum Width
65.7 in
Tine Spacing - Minimum Width
47.6 in

1829 mm (72 in) Construction Forks

Height
52 in
Width
98.3 in
Weight
1172.9 lb

1524 mm (60 in) Construction Forks

Height
52 in
Width
98.3 in
Weight
1172.9 lb

3.2 m3 (4.2 yd3) Pin On Sand & Gravel Bucket With Bolt-On Cutting Edge

Width
108.1 in
Height
58.6 in
Weight
2844 lb

3.2 m3 (4.2 yd3) Pin On Sand & Gravel Bucket With Bolt-On Cutting Edge

Width
108.1 in
Height
58.6 in
Weight
2841.8 lb

2.9 m3 (3.8 yd3) Pin On Sand & Gravel Bucket With Bolt-On Cutting Edge

Width
108 in
Height
56.7 in
Weight
2758 lb

2.9 m3 (3.8 yd3) Fusion™ Coupler Sand & Gravel Bucket With Bolt-On Cutting Edge

Width
108 in
Height
56.7 in
Weight
2724.9 lb

2.7 m3 (3.5 yd3) Pin On Sand & Gravel Bucket With Bolt-On Cutting Edge

Width
108.1 in
Height
55.3 in
Weight
2685.2 lb

2.7 m3 (3.5 yd3) Pin On Sand & Gravel Bucket With Bolt-On Cutting Edge

Width
108.1 in
Height
55.3 in
Weight
2667.6 lb

2.5 m3 (3.3 yd3) Fusion™ Coupler Sand & Gravel Bucket With Bolt-On Cutting Edge

Width
108.1 in
Height
53.5 in
Weight
2533.1 lb

5.0 m3 (6.5 yd3) Pin On Light Material Bucket With Bolt-On Cutting Edge

Width
108.1 in
Height
66.4 in
Weight
3298.1 lb

5.0 m3 (6.5 yd3) Pin On Light Material Bucket With Bolt-On Cutting Edge

Width
108.1 in
Height
66.4 in
Weight
3300.3 lb

5.0 m3 (6.5 yd3) Fusion™ Coupler Light Material Bucket With Bolt-On Cutting Edge

Width
108.1 in
Height
66.4 in
Weight
3311.3 lb

4.2 m3 (5.5 yd3) Pin On Light Material Bucket With Bolt-On Cutting Edge

Width
108.1 in
Height
60.6 in
Weight
3174.7 lb

4.2 m3 (5.5 yd3) Pin On Light Material Bucket With Bolt-On Cutting Edge

Width
108.1 in
Height
60.6 in
Weight
3170.2 lb

4.2 m3 (5.5 yd3) Fusion™ Coupler Light Material Bucket With Bolt-On Cutting Edge

Width
108.1 in
Height
60.6 in
Weight
3172.4 lb

3.8 m3 (5.0 yd3) Pin On Light Material Bucket With Bolt-On Cutting Edge

Width
108.1 in
Height
57.9 in
Weight
3024.7 lb

3.8 m3 (5.0 yd3) Pin On Light Material Bucket With Bolt-On Cutting Edge

Width
108.1 in
Height
57.9 in
Weight
3062.2 lb

3.8 m3 (5.0 yd3) Fusion™ Coupler Light Material Bucket With Bolt-On Cutting Edge

Width
108.1 in
Height
58.2 in
Weight
3015.9 lb

3.5 m3 (4.6 yd3) Pin On Light Material Bucket With Bolt-On Cutting Edge

Width
108.1 in
Height
57 in
Weight
2903.5 lb

3.5 m3 (4.6 yd3) Pin On Light Material Bucket With Bolt-On Cutting Edge

Width
108.1 in
Height
57 in
Weight
2894.7 lb

3.5 m3 (4.6 yd3) Fusion™ Coupler Light Material Bucket With Bolt-On Cutting Edge

Width
108.1 in
Height
57 in
Weight
2872.6 lb

3.0 m3 (3.9 yd3) Pin On Light Material Bucket With Bolt-On Cutting Edge

Width
108.1 in
Height
53.9 in
Weight
2731.5 lb

3.0 m3 (3.9 yd3) Fusion™ Coupler Light Material Bucket With Bolt-On Cutting Edge

Width
108.1 in
Height
53.9 in
Weight
2689.6 lb

5.0 m3 (6.5 yd3) Fusion™ Coupler High Dump Bucket With Bolt-On Cutting Edge

Width
119.4 in
Height
73.3 in
Weight
4909.7 lb

5.0 m3 (6.5 yd3) Pin On High Dump Bucket With Bolt-On Cutting Edge

Width
119.4 in
Height
73.3 in
Weight
5573.3 lb

5.0 m3 (6.5 yd3) Pin On High Dump Bucket With Bolt-On Cutting Edge

Width
119.3 in
Height
73.4 in
Weight
4973.6 lb

4.1 m3 (5.4 yd3) Fusion™ Coupler High Dump Bucket With Bolt-On Cutting Edge

Width
119.4 in
Height
67.8 in
Weight
4687 lb

4.1 m3 (5.4 yd3) Pin On High Dump Bucket With Bolt-On Cutting Edge

Width
119.4 in
Height
67.8 in
Weight
4753.2 lb

3.5 m3 (4.6 yd3) Fusion™ Coupler High Dump Bucket With Bolt-On Cutting Edge

Width
107.4 in
Height
67.2 in
Weight
3961.7 lb

2.9 m3 (3.8 yd3) Pin On General Purpose Bucket – Performance Series With Bolt-On Cutting Edge

Width
108.1 in
Height
56.7 in
Weight
2650 lb

2.9 m3 (3.8 yd3) Pin On General Purpose Bucket – Performance Series

Width
107.4 in
Height
55.9 in
Weight
2330.3 lb

2.9 m3 (3.8 yd3) Fusion™ Coupler General Purpose Bucket – Performance Series

Width
107.4 in
Height
55.7 in
Weight
2297.2 lb

2.7 m3 (3.5 yd3) Pin On General Purpose Bucket – Performance Series With Bolt-On Cutting Edge

Width
108.1 in
Height
55.3 in
Weight
2552.9 lb

2.7 m3 (3.5 yd3) Pin On General Purpose Bucket – Performance Series

Width
107.4 in
Height
54.4 in
Weight
2250.9 lb

2.7 m3 (3.5 yd3) ISO Coupler General Purpose Bucket – Performance Series

Width
107.4 in
Height
54.4 in
Weight
2118.6 lb

2.7 m3 (3.5 yd3) Fusion™ Coupler General Purpose Bucket – Performance Series

Width
100 in
Height
55.7 in
Weight
2120.8 lb

2.5 m3 (3.3 yd3) Pin On General Purpose Bucket – Performance Series With Bolt-On Cutting Edge

Width
108.1 in
Height
53.5 in
Weight
2455.9 lb

2.5 m3 (3.3 yd3) Pin On General Purpose Bucket – Performance Series With Bolt-On Cutting Edge

Width
100.4 in
Height
55.3 in
Weight
2442.7 lb

2.5 m3 (3.3 yd3) Pin On General Purpose Bucket – Performance Series

Width
99.5 in
Height
54.4 in
Weight
2156.1 lb

2.5 m3 (3.3 yd3) ISO Coupler General Purpose Bucket – Performance Series

Width
107.4 in
Height
52.6 in
Weight
2021.6 lb

2.5 m3 (3.3 yd3) Fusion™ Coupler General Purpose Bucket – Performance Series With Bolt-On Cutting Edge

Width
108.1 in
Height
53.5 in
Weight
2431.7 lb

2.5 m3 (3.3 yd3) Fusion™ Coupler General Purpose Bucket – Performance Series With Bolt-On Cutting Edge

Width
100.4 in
Height
55.3 in
Weight
2410.9 lb

2.3 m3 (3.0 yd3) Pin On General Purpose Bucket – Performance Series With Bolt-On Cutting Edge

Width
100.4 in
Height
53.5 in
Weight
2248.7 lb

2.3 m3 (3.0 yd3) ISO Coupler General Purpose Bucket – Performance Series

Width
99.7 in
Height
52.7 in
Weight
1832 lb

2.3 m3 (3.0 yd3) Fusion™ Coupler General Purpose Bucket – Performance Series With Bolt-On Cutting Edge

Width
100.4 in
Height
53.5 in
Weight
2142.9 lb

2.3 m3 (3.0 yd3) Fusion™ Coupler General Purpose Bucket – Performance Series

Width
100 in
Height
52.5 in
Weight
1902.6 lb

2.1 m3 (2.7 yd3) Pin On General Purpose Bucket – Performance Series With Bolt-On Cutting Edge

Width
100.4 in
Height
51.7 in
Weight
2164.9 lb

2.1 m3 (2.7 yd3) ISO Coupler General Purpose Bucket – Performance Series

Width
99.7 in
Height
50.9 in
Weight
1748.3 lb

2.1 m3 (2.7 yd3) Fusion™ Coupler General Purpose Bucket – Performance Series With Bolt-On Cutting Edge

Width
100.4 in
Height
51.7 in
Weight
2101 lb

2.5 m3 (3.3 yd3) ISO Coupler Flat Floor Bucket With Bolt-On Cutting Edge

Width
107.4 in
Height
53.5 in
Weight
2541.9 lb

2.5 m3 (3.3 yd3) Fusion™ Coupler Flat Floor Bucket With Bolt-On Cutting Edge

Width
107.4 in
Height
53.5 in
Weight
2656.6 lb

2.3 m3 (3.0 yd3) Pin On Flat Floor Bucket With Bolt-On Cutting Edge

Width
99.7 in
Height
53.1 in
Weight
2259.7 lb

2.3 m3 (3.0 yd3) ISO Coupler Flat Floor Bucket With Bolt-On Cutting Edge

Width
99.7 in
Height
53.5 in
Weight
2319.3 lb

2.3 m3 (3.0 yd3) Fusion™ Coupler Flat Floor Bucket With Bolt-On Cutting Edge

Width
99.7 in
Height
53.5 in
Weight
2403 lb

Specifications

Engine

Maximum Gross Power
188HP
Displacement (Performance Power Mode: Speed Range 1-4)
427in³
Maximum Gross Power - 1,800 rpm - ISO 14396 (DIN) (Performance Power Mode: Range 1-4)
190mhp
Note (1)
Net power ratings are tested at the reference conditions for the specified standard and denote power available at the flywheel when the engine is equipped with alternator, air cleaner, emission components and fan at specified speed.
Engine Model
Cat C7.1 ACERT**
Rated Net Power - 1,600 rpm - SAE J1349 at Minimum Fan Speed (Standard Power Mode: Range 1-3*)
170HP
Maximum Gross Power - 1,600 rpm - ISO 14396 (Standard Power Mode: Range 1-3*)
173HP
Note (2)
*Range 4 power and torque is equal to Performance Mode with Caterpillar Power by Range technology.
Note (3)
**The Cat C7.1 ACERT engine meets Tier 4 Final/Stage V off-highway emission standards.
Rated Net Power - 1,600 rpm - ISO 9249 at Minimum Fan Speed (Standard Power Mode: Range 1-3*)
170HP
Maximum Net Torque - ISO 9249:2007 (Standard Power Mode: Range 1-3*)
628ft·lbf
Rated Net Power - 1,800 rpm - ISO 9249 at Minimum Fan Speed (Performance Power Mode: Range 1-4)
184HP
Maximum Net Torque - ISO 9249:2007 (Performance Power Mode: Range 1-4)
650ft·lbf
Displacement (Standard Power Mode: Speed Range 1-3*)
427in³
Maximum Rated Gross Power - Maximum Engine Speed (Standard Power Mode: Range 1-3*)
1600r/min
Rated Net Power - 1,800 rpm - SAE J1349 at Minimum Fan Speed (Performance Power Mode: Range 1-4)
183HP
Maximum Gross Torque - ISO 14396 (Standard Power Mode: Range 1-3*)
642ft·lbf
Maximum Gross Power - 1,600 rpm - ISO 14396 (DIN) (Standard Power Mode: Range 1-3*)
176mhp
Maximum Net Torque - SAE J1349 (Performance Power Mode: Range 1-4)
649ft·lbf
Maximum Gross Power - 1,800 rpm - ISO 14396 (Performance Power Mode: Range 1-4)
188HP
Rated Net Power - 1,600 rpm - ISO 9249 (DIN) at Minimum Fan Speed (Standard Power Mode: Range 1-3*)
172mhp
Maximum Net Torque - SAE J1349 (Standard Power Mode: Range 1-3*)
627ft·lbf
Rated Net Power - 1,800 rpm - ISO 9249 (DIN) at Minimum Fan Speed (Performance Power Mode: Range 1-4)
186mhp
Maximum Rated Gross Power - Maximum Engine Speed (Performance Power Mode: Range 1-4)
1800r/min
Maximum Gross Torque - ISO 14396 (Performance Power Mode: Range 1-4)
664ft·lbf

Weights

Operating Weight
35778lb

Buckets

Bucket Capacities
2.5-5.0 m3 (3.2-6.5 yd3)
Bucket Capacities - Light Material
3.1-5.0 m³ (4.0-6.5 yd³)
Bucket Capacities - General Purpose
2.5-3.2 m³ (3.2-4.2 yd³)

Cab

ROPS
ISO 3471:2008
FOPS
ISO 3449:2008 Level II
Note (3)
*The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds.
Note (1)
Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Note (2)
The declared dynamic operator sound pressure levels per ISO 6396:2008*, when properly installed and maintained, are:
– Standard cab: 68 ±3 dB(A)
– Deluxe cab: 66 ±2 dB(A)

Service Refill Capacities

Transmission - Gear Box
2.9gal (US)
Engine Crankcase
5.3gal (US)
Hydraulic System - Including Tank
44.9gal (US)
Rear Axles
9.2gal (US)
Front Axles
9.2gal (US)
Diesel Exhaust Fluid (DEF) Tank
5gal (US)
Note
DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
Hydraulic Tank
23.8gal (US)
Fuel Tank
51.5gal (US)
Cooling System
7.9gal (US)

Loader Hydraulic System

Note (1)
*3rd and 4th function flow is fully adjustable from 20% to 100% of maximum flow through the secondary display, when equipped.
Hydraulic Cycle Time - Performance Mode at 1,800 rpm - Raise, Ground Level to Maximum Lift
5.5s
Hydraulic Cycle Time - Performance Mode at 1,800 rpm - Total Cycle Time
9.7s
Relief Pressure - Tilt Cylinder
4351psi
Hydraulic Cycle Time - Standard Mode at 1,600 rpm - Total Cycle Time
10.6s
Maximum Working Pressure - Implement Pump
4061psi
Relief Pressure - Tilt Cylinder - 3rd and 4th Function Maximum Working Pressure
4061psi
Hydraulic Cycle Time - Standard Mode at 1,600 rpm - Dump, at Maximum Lift Height
1.7s
Hydraulic Cycle Time - Performance Mode at 1,800 rpm - Dump, at Maximum Lift Height
1.5s
Hydraulic Cycle Time - Standard Mode at 1,600 rpm - Raise, Ground Level to Maximum Lift
6.2s
Hydraulic Cycle Time - Performance Mode at 1,800 rpm - Float Down, Maximum Lift to Ground Level
2.7s
Maximum Flow - Implement Pump - 4th Function Maximum Flow*
42gal/min
Relief Pressure - Tilt Cylinder - 3rd and 4th Function Relief Pressure
4351psi
Hydraulic Cycle Time - Standard Mode at 1,600 rpm - Float Down, Maximum Lift to Ground Level
2.7s
Maximum Flow - Implement Pump
50gal/min
Maximum Flow - Implement Pump - 3rd Function Maximum Flow*
50gal/min

Steering

Maximum Working Pressure - Steering Pump
3500psi
Steering Articulation Angle - Each Direction
40°
Maximum Flow - Steering Pump
34gal/min
Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left
3.3turns
Maximum Steering Torque - 0° (Straight Machine)
42506ft·lbf
Maximum Steering Torque - 40° (Full Turn)
31398ft·lbf
Steering Cycle Times - Full Left to Full Right - At 1,800 rpm: 90 rpm Steering Wheel Speed
2.3s

Transmission

Forward and Reverse - Range 3
17mile/h
Forward and Reverse - Range 4
25mile/h
Note
*Creeper control allows maximum speed range adjustability from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the secondary display, when equipped. Factory default is 7 km/h (4.4 mph).
Forward and Reverse - Range 1*
1-13 km/h (0.6-8 mph)
Forward and Reverse - Range 2
8mile/h

Sound

Note (1)
European Union Directive “2000/14/EC”
Average Exterior Sound Pressure (ISO 6395:2008)
101dB(A)
Operator Sound Pressure (ISO 6396:2008)
72dB(A)

Tires

Note (1)
Other tire choices are available. Contact your Cat dealer for details.
Standard Size
20.5 R25, radial (L-3)
Note (2)
In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities.
Other Choices Include
20.5 R25, radial (L-2); 20.5 R25, radial (L-5); 20.5-25 12PR (L-2); 20.5-25 12PR (L-3); 20.5-25 16PR (L-5); 23.5 R25, radial (L-3); 650/65 R25 radial (L-3); Skidder/Agriculture; Solid Tires
Note (3)
Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.

Axles

Rear
Oscillating ±11 degrees; Open differential (standard); Limited slip differential (optional)
Front
Fixed; Locking differential (standard)

Air Conditioning System

Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg of refrigerant which has a CO2 equivalent of 2.717 metric tonnes.

Standard/Optional Features

Standard Equipment:

  • Power Train
    • Auto idle shut down feature
    • Cat C7.1 ACERT engine
      – Power modes (Standard and Performance)
      – Power by range (High Power in Range 4)
      – Turbocharged and aftercooled
      – Filtered crankcase breather
      – Diesel particulate filter
      – Selective Catalyst Reduction
    • Coded start (requires secondary display)
    • Coolant protection to –34° C (–29° F)
    • Enclosed wet disc full hydraulic brakes
    • Fuel priming pump, automatic
    • Hydraulically driven demand cooling fan
    • Hydrostatic transmission with electronic control
      – Operator modes (Default, TC, Hystat, and Ice)
      – Directional Shift Aggressiveness (fast, medium, slow)
      – Rimpull control, adjust wheel torque
      – Creeper control, adjust ground speed
    • Parking brake, electric
    • Single plane cooling package wide six fins per inch density
    • Throttle lock and max speed limiter
  • Hydraulics
    • Automatic lift and bucket kickouts, adjustable in-cab
    • Bucket and fork modes, adjustable in-cab
    • Cylinder damping at kickout and mechanical end stops
    • Fine mode control (fast, medium, slow) in fork mode
    • Hydraulic response setting (fast, medium, slow)
    • Hydraulic diagnostic connectors and S·O·SSM ports
    • Load sensing hydraulics and steering
  • Electrical
    • Alternator, 115 amp, heavy duty
    • 12V power supply in cab (2)
    • Batteries, 1,000 CCA (2) 24V system, disconnect switch
    • Back-up alarm
    • Emergency shutdown switch
    • Halogen work and roading lights, LED rear tail lights
    • Product Link PRO with three year subscription
    • Remote jump start post
    • Resettable main and critical function breakers
  • Operator Environment
    • 75 mm (3 in) retractable seat belt, with audible alarm and indicator
    • Automatic temperature control
    • External heated mirrors with lower parabolic
    • Hydraulic control lockout
    • Interior cab lighting, door and dome
    • Interior rearview mirrors (2)
    • Lunch box storage
    • Radio ready speakers
    • Rear window defrost, electric
    • Seat-mounted electronic implement controls, adjustable
    • Column mounted multi function control – lights, wipers, turn signal
    • Tilt and telescopic steering wheel
    • Tinted front glass
    • Wet arm wiper/washer, 2-speed and intermittent, front
  • Other Standard Equipment
    • Large-access enclosure doors with adjustable close/open force
    • Parallel lift loader linkage
  • Eu Standard Equipment
    • Deluxe cab
    • Secondary display
    • Rearview camera

Optional Equipment:

  • Optional Equipment
    • Autolube, integrated in secondary display
    • Auxiliary flow, third and fourth function, adjustable through secondary display
    • Beacon light, strobe
    • Cab, deluxe (standard in Europe, optional in North America)
      – Electrically adjustable external heated mirrors (2)
      – Secondary display to enable features and adjust parameters
      – Sunscreen, front and rear
    • Camera, rearview (standard in Europe)
    • Cold start package
    • Counterweight, (heavy and logger)
    • Coupler, (Fusion and ISO 23727)
    • Debris packages (low, medium, high)
    • Fenders (extended cover and full coverage)
    • Guarding (machine and operator)
    • Linkage, high lift
    • Lights, auxiliary, halogen or LED with engine and DEF compartment lights
    • Object Detection
    • Product Link ELITE with capabilities for software push, data logging, histogram and trend mapping
    • Radio packages
    • Ride Control System, adjustable through secondary display
    • Seats
      – Deluxe seat – fully adjustable fabric air suspension seat with mid backrest and mechanical lumbar support
      – Premium seat – fully adjustable leather and fabric air suspension with high backrest and air lumbar support. Seat is heated and ventilated on bottom cushion and backrest.
    • Steering
      – Dual mode and secondary
    • NOTE: Not all features are available in all regions.

Attachments

5.0 m3 (6.5 yd3) Pin On Light Material Bucket

Width
107.4 in
Height
65.4 in
Weight
3038 lb

4.2 m3 (5.5 yd3) Pin On Light Material Bucket

Width
107.4 in
Height
59.8 in
Weight
2896.9 lb

3.8 m3 (5.0 yd3) Pin On Light Material Bucket

Width
107.4 in
Height
57.2 in
Weight
2738.1 lb

3.8 m3 (5.0 yd3) Pin On Light Material Bucket

Width
107.4 in
Height
57.2 in
Weight
2742.5 lb

3.8 m3 (5.0 yd3) Fusion™ Coupler Light Material Bucket

Width
107.4 in
Height
57 in
Weight
2696.3 lb

3.5 m3 (4.6 yd3) Pin On Light Material Bucket

Width
107.4 in
Height
56 in
Weight
2597 lb

3.0 m3 (3.9 yd3) Fusion™ Coupler Light Material Bucket

Width
107.4 in
Height
52.9 in
Weight
2370 lb

BA25 Manual Angle Broom

Overall Width
106.3 in
Sweeping Width
98.4 in
Brush Diameter
27.6 in

BA30 Hydraulic Angle Broom 24V with Water

Overall Width
126 in
Sweeping Width
118.1 in
Brush Diameter
36 in

BA25 Manual Angle Broom

Overall Width
106.3 in
Sweeping Width
98.4 in
Brush Diameter
27.6 in

4.87 m (16 ft) Straight Snow Push with rubber with trip edge trip edge

Working Width
192 in
Weight
3112.9 lb
Length
76.6 in

4.87 m (16 ft) Straight Snow Push with rubber with trip edge trip edge

Working Width
192 in
Weight
3249.6 lb
Length
62 in

4.26 m (14 ft) Straight Snow Push with rubber with trip edge trip edge

Working Width
168 in
Weight
2879.2 lb
Length
76.6 in

4.26 m (14 ft) Straight Snow Push with rubber with trip edge trip edge

Working Width
168 in
Weight
3018.1 lb
Length
62 in

3.66 m (12 ft) Straight Snow Push with rubber with trip edge trip edge

Working Width
144 in
Weight
2634.5 lb
Length
76.6 in

3.66 m (12 ft) Straight Snow Push with rubber trip edge

Working Width
144 in
Weight
2782.2 lb
Length
62 in

3941 mm (155 in) Material Handling Arms – Loader

Overall Width
25.4 in
Maximum Load Rating
4618.7 lb
Maximum Horizontal Reach
155.2 in

1812 mm (71 in) Fusion™ Coupler Sorting Grapple Fork

Width
71.3 in
Tine Length
50 in
Grapple Area
20.6 ft²

1812 mm (71 in) ISO Coupler Sorting Grapple Fork

Width
71.3 in
Tine Length
49.4 in
Grapple Area
20.6 ft²

1524 mm (60 in) Fusion™ Coupler Semi Millyard Fork

Width
84 in
Tine Spacing - Maximum Width
82.1 in
Tine Spacing - Minimum Width
60.9 in

1219 mm (48 in) Pin On Semi Millyard Fork

Width
70 in
Tine Spacing - Maximum Width
65.7 in
Tine Spacing - Minimum Width
47.6 in

1829 mm (72 in) Construction Forks

Height
52 in
Width
98.3 in
Weight
1172.9 lb

1524 mm (60 in) Construction Forks

Height
52 in
Width
98.3 in
Weight
1172.9 lb

3.2 m3 (4.2 yd3) Pin On Sand & Gravel Bucket With Bolt-On Cutting Edge

Width
108.1 in
Height
58.6 in
Weight
2844 lb

3.2 m3 (4.2 yd3) Pin On Sand & Gravel Bucket With Bolt-On Cutting Edge

Width
108.1 in
Height
58.6 in
Weight
2841.8 lb

2.9 m3 (3.8 yd3) Pin On Sand & Gravel Bucket With Bolt-On Cutting Edge

Width
108 in
Height
56.7 in
Weight
2758 lb

2.9 m3 (3.8 yd3) Fusion™ Coupler Sand & Gravel Bucket With Bolt-On Cutting Edge

Width
108 in
Height
56.7 in
Weight
2724.9 lb

2.7 m3 (3.5 yd3) Pin On Sand & Gravel Bucket With Bolt-On Cutting Edge

Width
108.1 in
Height
55.3 in
Weight
2685.2 lb

2.7 m3 (3.5 yd3) Pin On Sand & Gravel Bucket With Bolt-On Cutting Edge

Width
108.1 in
Height
55.3 in
Weight
2667.6 lb

2.5 m3 (3.3 yd3) Fusion™ Coupler Sand & Gravel Bucket With Bolt-On Cutting Edge

Width
108.1 in
Height
53.5 in
Weight
2533.1 lb

5.0 m3 (6.5 yd3) Pin On Light Material Bucket With Bolt-On Cutting Edge

Width
108.1 in
Height
66.4 in
Weight
3298.1 lb

5.0 m3 (6.5 yd3) Pin On Light Material Bucket With Bolt-On Cutting Edge

Width
108.1 in
Height
66.4 in
Weight
3300.3 lb

5.0 m3 (6.5 yd3) Fusion™ Coupler Light Material Bucket With Bolt-On Cutting Edge

Width
108.1 in
Height
66.4 in
Weight
3311.3 lb

4.2 m3 (5.5 yd3) Pin On Light Material Bucket With Bolt-On Cutting Edge

Width
108.1 in
Height
60.6 in
Weight
3174.7 lb

4.2 m3 (5.5 yd3) Pin On Light Material Bucket With Bolt-On Cutting Edge

Width
108.1 in
Height
60.6 in
Weight
3170.2 lb

4.2 m3 (5.5 yd3) Fusion™ Coupler Light Material Bucket With Bolt-On Cutting Edge

Width
108.1 in
Height
60.6 in
Weight
3172.4 lb

3.8 m3 (5.0 yd3) Pin On Light Material Bucket With Bolt-On Cutting Edge

Width
108.1 in
Height
57.9 in
Weight
3024.7 lb

3.8 m3 (5.0 yd3) Pin On Light Material Bucket With Bolt-On Cutting Edge

Width
108.1 in
Height
57.9 in
Weight
3062.2 lb

3.8 m3 (5.0 yd3) Fusion™ Coupler Light Material Bucket With Bolt-On Cutting Edge

Width
108.1 in
Height
58.2 in
Weight
3015.9 lb

3.5 m3 (4.6 yd3) Pin On Light Material Bucket With Bolt-On Cutting Edge

Width
108.1 in
Height
57 in
Weight
2903.5 lb

3.5 m3 (4.6 yd3) Pin On Light Material Bucket With Bolt-On Cutting Edge

Width
108.1 in
Height
57 in
Weight
2894.7 lb

3.5 m3 (4.6 yd3) Fusion™ Coupler Light Material Bucket With Bolt-On Cutting Edge

Width
108.1 in
Height
57 in
Weight
2872.6 lb

3.0 m3 (3.9 yd3) Pin On Light Material Bucket With Bolt-On Cutting Edge

Width
108.1 in
Height
53.9 in
Weight
2731.5 lb

3.0 m3 (3.9 yd3) Fusion™ Coupler Light Material Bucket With Bolt-On Cutting Edge

Width
108.1 in
Height
53.9 in
Weight
2689.6 lb

5.0 m3 (6.5 yd3) Fusion™ Coupler High Dump Bucket With Bolt-On Cutting Edge

Width
119.4 in
Height
73.3 in
Weight
4909.7 lb

5.0 m3 (6.5 yd3) Pin On High Dump Bucket With Bolt-On Cutting Edge

Width
119.4 in
Height
73.3 in
Weight
5573.3 lb

5.0 m3 (6.5 yd3) Pin On High Dump Bucket With Bolt-On Cutting Edge

Width
119.3 in
Height
73.4 in
Weight
4973.6 lb

4.1 m3 (5.4 yd3) Fusion™ Coupler High Dump Bucket With Bolt-On Cutting Edge

Width
119.4 in
Height
67.8 in
Weight
4687 lb

4.1 m3 (5.4 yd3) Pin On High Dump Bucket With Bolt-On Cutting Edge

Width
119.4 in
Height
67.8 in
Weight
4753.2 lb

3.5 m3 (4.6 yd3) Fusion™ Coupler High Dump Bucket With Bolt-On Cutting Edge

Width
107.4 in
Height
67.2 in
Weight
3961.7 lb

2.9 m3 (3.8 yd3) Pin On General Purpose Bucket – Performance Series With Bolt-On Cutting Edge

Width
108.1 in
Height
56.7 in
Weight
2650 lb

2.9 m3 (3.8 yd3) Pin On General Purpose Bucket – Performance Series

Width
107.4 in
Height
55.9 in
Weight
2330.3 lb

2.9 m3 (3.8 yd3) Fusion™ Coupler General Purpose Bucket – Performance Series

Width
107.4 in
Height
55.7 in
Weight
2297.2 lb

2.7 m3 (3.5 yd3) Pin On General Purpose Bucket – Performance Series With Bolt-On Cutting Edge

Width
108.1 in
Height
55.3 in
Weight
2552.9 lb

2.7 m3 (3.5 yd3) Pin On General Purpose Bucket – Performance Series

Width
107.4 in
Height
54.4 in
Weight
2250.9 lb

2.7 m3 (3.5 yd3) ISO Coupler General Purpose Bucket – Performance Series

Width
107.4 in
Height
54.4 in
Weight
2118.6 lb

2.7 m3 (3.5 yd3) Fusion™ Coupler General Purpose Bucket – Performance Series

Width
100 in
Height
55.7 in
Weight
2120.8 lb

2.5 m3 (3.3 yd3) Pin On General Purpose Bucket – Performance Series With Bolt-On Cutting Edge

Width
108.1 in
Height
53.5 in
Weight
2455.9 lb

2.5 m3 (3.3 yd3) Pin On General Purpose Bucket – Performance Series With Bolt-On Cutting Edge

Width
100.4 in
Height
55.3 in
Weight
2442.7 lb

2.5 m3 (3.3 yd3) Pin On General Purpose Bucket – Performance Series

Width
99.5 in
Height
54.4 in
Weight
2156.1 lb

2.5 m3 (3.3 yd3) ISO Coupler General Purpose Bucket – Performance Series

Width
107.4 in
Height
52.6 in
Weight
2021.6 lb

2.5 m3 (3.3 yd3) Fusion™ Coupler General Purpose Bucket – Performance Series With Bolt-On Cutting Edge

Width
108.1 in
Height
53.5 in
Weight
2431.7 lb

2.5 m3 (3.3 yd3) Fusion™ Coupler General Purpose Bucket – Performance Series With Bolt-On Cutting Edge

Width
100.4 in
Height
55.3 in
Weight
2410.9 lb

2.3 m3 (3.0 yd3) Pin On General Purpose Bucket – Performance Series With Bolt-On Cutting Edge

Width
100.4 in
Height
53.5 in
Weight
2248.7 lb

2.3 m3 (3.0 yd3) ISO Coupler General Purpose Bucket – Performance Series

Width
99.7 in
Height
52.7 in
Weight
1832 lb

2.3 m3 (3.0 yd3) Fusion™ Coupler General Purpose Bucket – Performance Series With Bolt-On Cutting Edge

Width
100.4 in
Height
53.5 in
Weight
2142.9 lb

2.3 m3 (3.0 yd3) Fusion™ Coupler General Purpose Bucket – Performance Series

Width
100 in
Height
52.5 in
Weight
1902.6 lb

2.1 m3 (2.7 yd3) Pin On General Purpose Bucket – Performance Series With Bolt-On Cutting Edge

Width
100.4 in
Height
51.7 in
Weight
2164.9 lb

2.1 m3 (2.7 yd3) ISO Coupler General Purpose Bucket – Performance Series

Width
99.7 in
Height
50.9 in
Weight
1748.3 lb

2.1 m3 (2.7 yd3) Fusion™ Coupler General Purpose Bucket – Performance Series With Bolt-On Cutting Edge

Width
100.4 in
Height
51.7 in
Weight
2101 lb

2.5 m3 (3.3 yd3) ISO Coupler Flat Floor Bucket With Bolt-On Cutting Edge

Width
107.4 in
Height
53.5 in
Weight
2541.9 lb

2.5 m3 (3.3 yd3) Fusion™ Coupler Flat Floor Bucket With Bolt-On Cutting Edge

Width
107.4 in
Height
53.5 in
Weight
2656.6 lb

2.3 m3 (3.0 yd3) Pin On Flat Floor Bucket With Bolt-On Cutting Edge

Width
99.7 in
Height
53.1 in
Weight
2259.7 lb

2.3 m3 (3.0 yd3) ISO Coupler Flat Floor Bucket With Bolt-On Cutting Edge

Width
99.7 in
Height
53.5 in
Weight
2319.3 lb

2.3 m3 (3.0 yd3) Fusion™ Coupler Flat Floor Bucket With Bolt-On Cutting Edge

Width
99.7 in
Height
53.5 in
Weight
2403 lb