The Cat® 920 Compact Wheel Loader features a C3.6 engine, the Cat Optimized Z-bar Loader linkage, various work tools, a state-of-the-art electro-hydraulic system, a tuned drivetrain, a cab with all-around visibility, extended service intervals and excellent service access, and standard fuel savings features.
|
|
|
|
|
|
|
|
Engine
- Maximum Gross Power
- 121HP
- Rated Net Power - Rated Engine Speed
- 2200r/min
- Maximum Gross Power - Rated Engine Speed
- 2200r/min
- Rated Net Power - SAE J1349
- 120HP
- Maximum Gross Power - ISO 14396 (metric)
- 122HP
- Rated Net Power - ISO 9249
- 118HP
- Maximum Gross Torque - SAE J1995
- 372ft·lbf
- Maximum Gross Torque - ISO 14396
- 369ft·lbf
- Maximum Net Torque - SAE J1349
- 366ft·lbf
- Maximum Net Torque - ISO 9249
- 363ft·lbf
- Displacement
- 220in³
- Bore
- 3.85in
- Stroke
- 4.72in
- Engine Model
- Cat C3.6
- Emissions
- Engine meets Tier 4 Final/Stage V emission standards.
- Note
- Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator.
- Maximum Gross Power - ISO 14396
- 121HP
Weights
- Operating Weight
- 21742lb
Buckets
- Bucket Capacities
- 1.3-3.5 m3 (1.7-4.6 yd3)
- Bucket Capacities - General Purpose
- 1.3-1.9 m³ (1.7-2.5 yd³)
- Bucket Capacities - Light Material
- 2.5-3.5 m³ (3.3-4.6 yd³)
Sustainability
- Recyclability
- 95%
Service Refill Capacities
- Transmission
- 0.8gal (US)
- Engine Crankcase
- 2.6gal (US)
- Diesel Exhaust Fluid (DEF) Tank
- 4.8gal (US)
- Axles - Rear
- 4.5gal (US)
- Cooling System
- 5.7gal (US)
- Hydraulic System - Including Tank
- 25.9gal (US)
- Axles - Front
- 4.5gal (US)
- Fuel Tank
- 43.6gal (US)
- Hydraulic Tank
- 14.5gal (US)
- Note
- DEF used in Cat Selective Catalyst Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
Cab
- ROPS
- ISO 3471:2008
- FOPS
- ISO 3449:2005
- Note (3)
- The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC (as amended by 2005/88/EC) is 103 dB(A).
- Note (2)
- The declared dynamic operator sound pressure levels per ISO 6396:2008*, when the cab is properly installed and maintained, is 77 dB(A).
- Note (1)
- Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
- Note (4)
- *The measurements were conducted with the cab doors and windows closed.
Steering
- Maximum Working Pressure - Steering Pump
- 3190psi
- Steering Cycle Times - Full Left to Full Right - At 2,350 rpm: 90 rpm Steering Wheel Speed
- 2.3s
- Steering Articulation Angle - Each Direction
- 40°
- Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left
- 3.4turns
- Maximum Flow - Steering Pump
- 21.7gal/min
Loader Hydraulic System
- Relief Pressure - Tilt Cylinder
- 4641psi
- Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, Standard
- 25gal/min
- Maximum Flow - Implement Pump
- 43.6gal/min
- Relief Pressure - Tilt Cylinder - 4th Function Relief Pressure
- 4641psi
- Hydraulic Cycle Time - Float Down, Maximum Lift to Ground Level
- 2.7s
- Note
- All cycle times listed are with cylinder snubbing turned off.
- Maximum Working Pressure - Implement Pump
- 4061psi
- Hydraulic Cycle Time - Total Cycle Time
- 11.5s
- Hydraulic Cycle Time - Rackback
- 2.2s
- Maximum Flow - Implement Pump - 4rd Function, Maximum Flow
- 25gal/min
- Hydraulic Cycle Time - Dump, at Maximum Reach
- 1.8s
- Hydraulic Cycle Time - Raise, Ground Level to Maximum Lift
- 4.8s
- Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, High
- 40gal/min
Transmission
- Note
- *Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1.
- Forward and Reverse - Speed Range 3
- 25mile/h
- Forward and Reverse - Speed Range 2*
- 12.5mile/h
- Forward and Reverse - Speed Range 1*
- 6.3mile/h
Axles
- Rear
- Oscillating ±11 degrees; Locking differential (standard)
- Front
- Fixed; Locking differential (standard)
Tires
- Other Choices Include
- 17.5 R25 L3 XHA2; 20.5 R25 L3 XHA3; 17.5-25 L2/L3 SGL; 20.5-25 L2/L3 SGL; 17.5-25 L3 HRL D/L-3A; 17.5 R25 L2 Snow; 20.5 R25 L2 Snow; 17.5 R25 Solid
- Standard Size
- 17.5 R25 L2 XTLA
- Note (1)
- Other tire choices are available. Contact your Cat dealer for details.
- Note (3)
- Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
- Note (2)
- In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities.
Standard Equipment:
Optional Equipment:
2697 mm (106 in) Fusion™ Coupler Loader Rake
- Width
- 106.2 in
- Weight
- 2963 lb
- Overall Height
- 65.1 in
3941 mm (155 in) Material Handling Arms – Loader
- Overall Width
- 25.4 in
- Maximum Load Rating
- 4618.7 lb
- Maximum Horizontal Reach
- 155.2 in
3941 mm (155 in) Material Handling Arms – Loader
- Overall Width
- 26 in
- Maximum Load Rating
- 4618.7 lb
- Maximum Horizontal Reach
- 155.2 in
1614 mm (64 in) Pallet Fork Carriage
- Height
- 37 in
- Width
- 63.5 in
- Weight
- 1142 lb
1566 mm (62 in) Pallet Fork Carriage
- Height
- 39.6 in
- Width
- 61.7 in
- Weight
- 1569.9 lb
1550 mm (61 in) Pallet Fork Carriage
- Height
- 33 in
- Width
- 61 in
- Weight
- 535.7 lb
1550 mm (61 in) Pallet Fork Carriage
- Height
- 36.8 in
- Width
- 61 in
- Weight
- 539 lb
2196 mm (87 in) Log & Lumber Fork Carriage
- Interface Type
- IT Coupler
- Tine Configuration
- Floating, Swinging
- Height
- 59.3 in
2134 mm (84 in) Construction Fork Carriage
- Height
- 43.1 in
- Width
- 84 in
- Tine Spacing Range - Outside Width
- 395-2034 mm (15.5-80.1 in)
3.5 m3 (4.6 yd3) Fusion™ Coupler Light Material Bucket – Performance Series With Bolt-On Cutting Edge
- Width
- 100.4 in
- Weight
- 2081.2 lb
- Height
- 58.4 in
3.5 m3 (4.6 yd3) IT Coupler Light Material Bucket – Performance Series With Bolt-On Cutting Edge
- Width
- 100.4 in
- Weight
- 2017.2 lb
- Height
- 58.5 in
3.5 m3 (4.6 yd3) ISO Coupler Light Material Bucket – Performance Series With Bolt-On Cutting Edge
- Width
- 100.4 in
- Weight
- 2041.5 lb
- Height
- 58.5 in
3.5 m3 (4.6 yd3) Pin On Light Material Bucket – Performance Series With Bolt-On Cutting Edge
- Width
- 100.4 in
- Weight
- 2067.9 lb
- Height
- 58.5 in
3.0 m3 (3.9 yd3) IT Coupler Light Material Bucket – Performance Series With Bolt-On Cutting Edge
- Width
- 100.4 in
- Weight
- 1882.7 lb
- Height
- 55.3 in
3.0 m3 (3.9 yd3) Fusion™ Coupler Light Material Bucket – Performance Series With Bolt-On Cutting Edge
- Width
- 100.4 in
- Weight
- 1948.9 lb
- Height
- 55.2 in
3.0 m3 (3.9 yd3) Pin On Light Material Bucket – Performance Series With Bolt-On Cutting Edge
- Width
- 100.4 in
- Weight
- 1935.7 lb
- Height
- 55.3 in
3.0 m3 (3.9 yd3) ISO Coupler Light Material Bucket – Performance Series With Bolt-On Cutting Edge
- Width
- 100.4 in
- Weight
- 1909.2 lb
- Height
- 55.3 in
2.5 m3 (3.3 yd3) ISO Coupler Light Material Bucket – Performance Series With Bolt-On Cutting Edge
- Width
- 100.4 in
- Weight
- 1772.5 lb
- Height
- 49.9 in
2.5 m3 (3.3 yd3) IT Coupler Light Material Bucket – Performance Series With Bolt-On Cutting Edge
- Width
- 100.4 in
- Weight
- 1748.3 lb
- Height
- 49.9 in
2.5 m3 (3.3 yd3) Fusion™ Coupler Light Material Bucket – Performance Series With Bolt-On Cutting Edge
- Width
- 100.4 in
- Weight
- 1799 lb
- Height
- 49.9 in
2.5 m3 (3.3 yd3) Pin On Light Material Bucket – Performance Series With Bolt-On Cutting Edge
- Width
- 100.4 in
- Weight
- 1799 lb
- Height
- 49.9 in
2.5 m3 ( 3.3 yd3) IT Coupler High Dump Bucket With Bolt-On Cutting Edge
- Width
- 93.1 in
- Height
- 62.3 in
- Weight
- 3240.8 lb
2.1 m3 ( 2.7 yd3) IT Coupler High Dump Bucket With Bolt-On Cutting Edge
- Width
- 93.1 in
- Height
- 58 in
- Weight
- 3157 lb
1.9 m3 (2.5 yd3) Fusion™ Coupler General Purpose Bucket – Performance Series With Bolt-On Teeth
- Width
- 95.9 in
- Weight
- 1618.2 lb
- Height
- 52.4 in
1.9 m3 (2.5 yd3) Pin On General Purpose Bucket – Performance Series With Bolt-On Cutting Edge
- Width
- 94.5 in
- Weight
- 1487.9 lb
- Height
- 45.7 in
1.9 m3 (2.5 yd3) IT Coupler General Purpose Bucket – Performance Series With Bolt-On Cutting Edge
- Width
- 94.5 in
- Weight
- 1470 lb
- Height
- 45.6 in
1.9 m3 (2.5 yd3) ISO Coupler General Purpose Bucket – Performance Series With Bolt-On Cutting Edge
- Width
- 94.5 in
- Weight
- 1470 lb
- Height
- 45.6 in
2.0 m3 (2.6 yd3) Fusion™ Coupler General Purpose Bucket – Performance Series With Bolt-On Cutting Edge
- Width
- 94.5 in
- Weight
- 1618.2 lb
- Height
- 51.3 in
1.8 m3 (2.4 yd3) Pin On General Purpose Bucket – Performance Series With Bolt-On Cutting Edge
- Width
- 94.5 in
- Weight
- 1451.1 lb
- Height
- 45.7 in
1.8 m3 (2.4 yd3) Pin On General Purpose Bucket – Performance Series With Bolt-On Teeth
- Width
- 95.6 in
- Weight
- 1397.9 lb
- Height
- 46.1 in
1.7 m3 (2.2 yd3) Fusion™ Coupler General Purpose Bucket – Performance Series With Bolt-On Cutting Edge
- Width
- 94.5 in
- Weight
- 1519 lb
- Height
- 49.2 in
1.6 m3 (2.1 yd3) Fusion™ Coupler General Purpose Bucket – Performance Series With Bolt-On Teeth
- Width
- 95.9 in
- Weight
- 1426.4 lb
- Height
- 50.3 in
1.7 m3 (2.2 yd3) ISO Coupler General Purpose Bucket – Performance Series With Bolt-On Cutting Edge
- Width
- 94.5 in
- Weight
- 1433 lb
- Height
- 45.6 in
1.7 m3 (2.2 yd3) Pin On General Purpose Bucket – Performance Series With Bolt-On Teeth
- Width
- 95.6 in
- Weight
- 1358 lb
- Height
- 46.1 in
1.7 m3 (2.2 yd3) IT Coupler General Purpose Bucket – Performance Series With Bolt-On Cutting Edge
- Width
- 94.5 in
- Weight
- 1393.1 lb
- Height
- 45.6 in
1.6 m3 (2.1 yd3) ISO Coupler General Purpose Bucket – Performance Series With Bolt-On Teeth
- Width
- 95.6 in
- Weight
- 1341 lb
- Height
- 46.1 in
1.6 m3 (2.1 yd3) IT Coupler General Purpose Bucket – Performance Series With Bolt-On Cutting Edge
- Width
- 94.5 in
- Weight
- 1362 lb
- Height
- 42.5 in
1.6 m3 (2.1 yd3) Pin On General Purpose Bucket – Performance Series With Bolt-On Cutting Edge
- Width
- 94.5 in
- Weight
- 1342 lb
- Height
- 42.5 in
1.6 m3 (2.1 yd3) IT Coupler General Purpose Bucket – Performance Series With Bolt-On Teeth
- Width
- 95.6 in
- Weight
- 1300.9 lb
- Height
- 45.8 in
1.5 m3 (2.0 yd3) IT Coupler General Purpose Bucket – Performance Series With Bolt-On Cutting Edge
- Width
- 94.5 in
- Weight
- 1265 lb
- Height
- 42.5 in
1.5 m3 (2.0 yd3) Pin On General Purpose Bucket – Performance Series With Bolt-On Teeth
- Width
- 95.6 in
- Weight
- 1270.1 lb
- Height
- 43 in
1.5 m3 (2.0 yd3) IT Coupler General Purpose Bucket – Performance Series With Bolt-On Teeth
- Width
- 95.6 in
- Weight
- 1250 lb
- Height
- 43 in
1.5 m3 (2.0 yd3) ISO Coupler General Purpose Bucket – Performance Series With Bolt-On Cutting Edge
- Width
- 94.5 in
- Weight
- 1304.9 lb
- Height
- 42.5 in
1.4 m3 (1.8 yd3) ISO Coupler General Purpose Bucket – Performance Series With Bolt-On Teeth
- Width
- 95.6 in
- Weight
- 1213 lb
- Height
- 43 in
1.4 m3 (1.8 yd3) IT Coupler General Purpose Bucket – Performance Series With Bolt-On Teeth
- Width
- 95.6 in
- Weight
- 1173.1 lb
- Height
- 43 in
1.4 m3 (1.8 yd3) Pin On General Purpose Bucket – Performance Series With Bolt-On Cutting Edge
- Width
- 94.5 in
- Weight
- 1276 lb
- Height
- 42.5 in
1.3 m3 (1.7 yd3) Pin On General Purpose Bucket – Performance Series With Bolt-On Teeth
- Width
- 95.6 in
- Weight
- 1184.1 lb
- Height
- 43 in
1.3 m3 (1.7 yd3) ISO Coupler General Purpose Bucket – Performance Series With Bolt-On Cutting Edge
- Width
- 94.5 in
- Weight
- 1261 lb
- Height
- 42.5 in
1.3 m3 (1.7 yd3) IT Coupler General Purpose Bucket – Performance Series With Bolt-On Cutting Edge
- Width
- 94.5 in
- Weight
- 1220.9 lb
- Height
- 42.5 in
1.2 m3 (1.6 yd3) ISO Coupler General Purpose Bucket – Performance Series With Bolt-On Teeth
- Width
- 95.6 in
- Weight
- 1168.9 lb
- Height
- 43 in
1.2 m3 (1.6 yd3) IT Coupler General Purpose Bucket – Performance Series With Bolt-On Teeth
- Width
- 95.6 in
- Weight
- 1129 lb
- Height
- 43 in
1.9 m3 (2.5 yd3) ISO Coupler Flat Floor Bucket – Performance Series With Bolt-On Cutting Edge
- Width
- 94.5 in
- Weight
- 1436.1 lb
- Height
- 45.6 in
1.8 m3 (2.4 yd3) ISO Coupler Flat Floor Bucket – Performance Series With Weld-On Teeth
- Width
- 95.8 in
- Weight
- 1490.1 lb
- Height
- 45.4 in
1.7 m3 (2.2 yd3) ISO Coupler Flat Floor Bucket – Performance Series With Bolt-On Cutting Edge
- Width
- 94.5 in
- Weight
- 1524.9 lb
- Height
- 42.5 in
1.6 m3 (2.1 yd3) ISO Coupler Flat Floor Bucket – Performance Series With Bolt-On Cutting Edge
- Width
- 94.5 in
- Weight
- 1492.1 lb
- Height
- 42.5 in
1.6 m3 (2.1 yd3) ISO Coupler Flat Floor Bucket – Performance Series With Weld-On Teeth
- Width
- 95.8 in
- Weight
- 1377.9 lb
- Height
- 40.3 in
1.5 m3 (2.0 yd3) ISO Coupler Flat Floor Bucket – Performance Series With Weld-On Teeth
- Width
- 95.8 in
- Weight
- 1490.1 lb
- Height
- 42.2 in
1.34 m3 (1.75 yd3) IT Coupler Multi-Purpose Bucket With Bolt-On Cutting Edge
- Width
- 96.7 in
- Height
- 41.5 in
- Weight
- 2577.2 lb
1.34 m3 (1.75 yd3) IT Coupler Multi-Purpose Bucket With Bolt-On Cutting Edge
- Width
- 96.7 in
- Height
- 41.5 in
- Weight
- 2414.1 lb
BP25 Pickup Broom
- Overall Width
- 78.3 in
- Sweeping Width
- 60 in
- Brush Diameter
- 26 in
BA25 Manual Angle Broom
- Overall Width
- 106 in
- Sweeping Width
- 98.4 in
- Brush Diameter
- 27.6 in
BA25 Hydraulic, 24V Angle Broom
- Overall Width
- 106 in
- Sweeping Width
- 98.4 in
- Brush Diameter
- 27.6 in
BA25 Hydraulic, 12V Angle Broom
- Overall Width
- 106 in
- Sweeping Width
- 98.4 in
- Brush Diameter
- 27.6 in
3.66 m (12 ft) Straight Snow Push with rubber trip edge
- Working Width
- 144 in
- Weight
- 2782.2 lb
- Length
- 62 in
3.66 m (12 ft) Straight Snow Push with rubber trip edge
- Working Width
- 144 in
- Weight
- 1865.1 lb
- Length
- 50.4 in
3.66 m (12 ft) Straight Snow Push with rubber trip edge
- Working Width
- 144 in
- Weight
- 2054.7 lb
- Length
- 69.1 in
3.66 m (12 ft) Straight Snow Push with steel trip edge
- Working Width
- 144 in
- Weight
- 2184.8 lb
- Length
- 69.1 in
3.66 m (12 ft) Straight Snow Push with steel trip edge
- Working Width
- 144 in
- Weight
- 2932.1 lb
- Length
- 62 in
3.66 m (12 ft) Straight Snow Push with steel trip edge
- Working Width
- 144 in
- Weight
- 1995.2 lb
- Length
- 50.4 in
3.05 m (10 ft) Straight Snow Push with steel trip edge
- Working Width
- 120 in
- Weight
- 1803.4 lb
- Length
- 50.4 in
3.05 m (10 ft) Straight Snow Push with rubber trip edge
- Working Width
- 120 in
- Weight
- 1677.7 lb
- Length
- 50.4 in
3.05 m (10 ft) Straight Snow Push with steel trip edge
- Working Width
- 120 in
- Weight
- 1995.2 lb
- Length
- 69.1 in
3.05 m (10 ft) Straight Snow Push with rubber trip edge
- Working Width
- 120 in
- Weight
- 1865.1 lb
- Length
- 69.1 in
3.7 m (12 ft) Snow Plow
- Width
- 144 in
- Angled Width
- 118 in
- Weight
- 2180.4 lb
3.0 m (10 ft) Snow Plow
- Width
- 120 in
- Angled Width
- 98.3 in
- Weight
- 1988.6 lb
3.0 m (10 ft) Snow Plow
- Width
- 120 in
- Angled Width
- 98.3 in
- Weight
- 3062.2 lb
2.7 m (9 ft) Snow Plow
- Width
- 108 in
- Angled Width
- 88.5 in
- Weight
- 1885 lb
1.8 m3 (2.4 yd3) Pin On General Purpose Bucket – Performance Series
- Width
- 94 in
- Weight
- 1302.9 lb
- Height
- 45.2 in
1.8 m3 (2.4 yd3) ISO Coupler General Purpose Bucket – Performance Series
- Width
- 94 in
- Weight
- 1321.9 lb
- Height
- 45.2 in
1.7 m3 (2.2 yd3) Pin On General Purpose Bucket – Performance Series
- Width
- 94 in
- Weight
- 1263 lb
- Height
- 45.2 in
1.8 m3 (2.4 yd3) IT Coupler General Purpose Bucket – Performance Series
- Width
- 94 in
- Weight
- 1265 lb
- Height
- 45.2 in
1.6 m3 (2.1 yd3) ISO Coupler General Purpose Bucket – Performance Series
- Width
- 94 in
- Weight
- 1246.1 lb
- Height
- 45.2 in
1.6 m3 (2.1 yd3) IT Coupler General Purpose Bucket – Performance Series
- Width
- 94 in
- Weight
- 1205.9 lb
- Height
- 45.2 in
1.5 m3 (2.0 yd3) Pin On General Purpose Bucket – Performance Series
- Width
- 94 in
- Weight
- 1175.1 lb
- Height
- 42.1 in
1.4 m3 (1.8 yd3) ISO Coupler General Purpose Bucket – Performance Series
- Width
- 94 in
- Weight
- 1118 lb
- Height
- 42.1 in
1.5 m3 (2.0 yd3) IT Coupler General Purpose Bucket – Performance Series
- Width
- 94 in
- Weight
- 1154.6 lb
- Height
- 42.1 in
1.2 m3 (1.6 yd3) ISO Coupler General Purpose Bucket – Performance Series
- Width
- 94 in
- Weight
- 1074.1 lb
- Height
- 42.1 in
1.3 m3 (1.7 yd3) Pin On General Purpose Bucket – Performance Series
- Width
- 94 in
- Weight
- 1088.4 lb
- Height
- 42.1 in
1.4 m3 (1.8 yd3) IT Coupler General Purpose Bucket – Performance Series
- Width
- 94 in
- Weight
- 1118.8 lb
- Height
- 42.1 in
1.2 m3 (1.6 yd3) IT Coupler General Purpose Bucket – Performance Series
- Width
- 94 in
- Weight
- 1033.7 lb
- Height
- 42.1 in