The Cat® 272D3 XE Skid Steer Loader, with its powerful engine, high output hydraulic system, high lift forces and vertical lift design, provides the maximum performance for work tool productivity, digging, truck loading and material handling.
|
|
|
|
Engine
- Gross Power - SAE J1995
- 110HP
- Net Power - SAE 1349
- 106HP
- Displacement
- 232in³
- Stroke
- 4.7in
- Bore
- 3.9in
- Net Flywheel Power
- 106HP
- Engine Model
- Cat C3.8 DIT (turbo)
- Net Power - ISO 9249
- 107HP
- Peak Torque - 1,500 rpm - SAE J1995
- 276ft·lbf
Operating Specifications
- Rated Operating Capacity
- 3700lb
- Tipping Load
- 7400lb
- Breakout Force - Tilt Cylinder
- 7362lb
- Breakout Force - Lift Cylinder
- 6085lb
- Note
- Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, ride control, enclosed cab with glass door, side windows, air conditioning, air ride seat, advanced display, rearview camera, 1,000 CCA
- Rated Operating Capacity with Optional Counterweight
- 3950lb
Weights
- Operating Weight
- 9573lb
- Note
- Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, ride control, enclosed cab with glass door, side windows, air conditioning, air ride seat, advanced display, rearview camera, 1,000 CCA
Dimensions
- Wheel Base
- 54.6in
- Height - Top of Cab
- 84in
- Vehicle Width over Tires
- 76in
- Ground Clearance
- 10.4in
- Departure Angle
- 28°
- Maximum Dump Angle
- 51°
- Bumper Overhang - Behind Rear Axle
- 46.2in
- Turning Radius from Center - Machine Rear
- 74.7in
- Length - Without Bucket
- 127in
- Reach - Maximum Lift/Dump
- 29in
- Clearance at Maximum Lift and Dump
- 97.4in
- Bucket Pin Height - Maximum Lift
- 128.6in
- Bucket Pin Height - Carry Position
- 9.3in
- Turning Radius from Center - Coupler
- 57.7in
- Bucket Pin Reach - Maximum Lift
- 13.5in
- Rack Back Angle - Maximum Height
- 84°
- Maximum Overall Height
- 161.5in
- Length - With Bucket on Ground
- 155in
- Maximum Reach - With Arms Parallel to Ground
- 49.1in
- Turning Radius from Center - Bucket (racked)
- 90.6in
- Note
- Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, ride control, enclosed cab with glass door, side windows, air conditioning, air ride seat, advanced display, rearview camera, 1,000 CCA
- Roll Back Angle
- 28°
Cab
- ROPS
- ISO 3471:2008
- FOPS
- ISO 3449:2005 Level I
Service Refill Capacities
- Cooling System
- 4.1gal (US)
- Engine Crankcase
- 3.5gal (US)
- Fuel Tank
- 31.7gal (US)
- Hydraulic System
- 14.5gal (US)
- Hydraulic Tank
- 10.3gal (US)
- Chain Box - Each Side
- 2.7gal (US)
- Diesel Exhaust Fluid (DEF) Tank
- 5gal (US)
Hydraulic System
- Standard Flow Mode - Loader Hydraulic Pressure
- 3335psi
- Standard Flow Mode - Hydraulic Power - Calculated
- 44HP
- Standard Flow Mode - Loader Hydraulic Flow
- 23gal/min
- Note
- *When equipped with Cat 400 Series work tools.
- Hydraulic Flow - XE - Maximum Loader Hydraulic Pressure
- 4061psi
- Hydraulic Flow - XE - Maximum Loader Hydraulic Flow*
- 40gal/min
- Hydraulic Flow - XE - Hydraulic Power (calculated)
- 94HP
Power Train
- Travel Speed - Forward or Reverse - One Speed
- 7.2mile/h
- Travel Speed - Forward or Reverse - Two Speed
- 10.3mile/h
Air Conditioning System (if equipped)
- Air Conditioning
- The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes.
Noise Level
- Note (2)
- **The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan spe
- Outside Cab***
- 104dB(A)
- Inside Cab**
- 83dB(A)
- Note (1)
- Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
- Note (3)
- ***The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.
Standard Equipment:
-
- Electrical
-
- 12 volt Electrical System
- 100 ampere Alternator
- Ignition Key Start/Stop Switch
- Lights: Gauge Backlighting, Two Rear Tail Lights, Two Rear Halogen Working Lights, Two Adjustable Front Halogen Lights, Dome Light
- Backup Alarm
- Heavy Duty Battery, 1,000 CCA, with Battery Disconnect
-
- Operator Environment
-
- Gauges: Fuel Level, DEF Level, Hour Meter
- Operator Warning System Indicators: Air Filter Restriction, Alternator Output, Armrest Raised/Operator Out of Seat, Engine Coolant Temperature, Engine Oil Pressure, Air Inlet Heater Activation, Hydraulic Filter Restriction, Hydraulic Oil Temperature, Park Brake Engaged, Engine Emission System
- High Back Cloth Seat with Air Suspension, Heated with Recline and Lumbar Support and Fully Adjustable Seat Mounted Controls
- Fold In Ergonomic Contoured Armrest
- Control Interlock System, when operator leaves seat or armrest raised: Hydraulic System Disables, Hydrostatic Transmission Disables, Parking Brake Engages
- ROPS Cab, Enclosed, Tilt Up
- FOPS, Level I
- Top, Rear and Side Windows
- Headliner, Deluxe
- Floor Mat
- Interior Rearview Mirror
- 12 volt Electric Socket
- Horn
- Hand (Dial) and Foot Throttle, Electronic with Decel Feature
- Advanced Display with Rearview Camera: Full Color, 127 mm (5 in) LCD Screen, Advanced Multi-operator Security System, On-screen Adjustments for Implement Response, Hystat Drive Response, and Creep Control
- Storage Compartment with Netting
-
- Power Train
-
- Cat C3.8, Turbo Diesel Engine, Meeting Tier 4 Final and Stage V Emission Standards
- Air Cleaner, Dual Element, Radial Seal
- S·O·SSM Sampling Valve, Hydraulic Oil
- Filters, Cartridge-type, Hydraulic
- Filters, Canister-type, Fuel and Water Separator
- Radiator/Hydraulic Oil Cooler (side-by-side)
- Spring Applied, Hydraulically Released Parking Brakes
- Hydrostatic Transmission, Two Speed with Speed Sensitive Ride Control
- Four Wheel Chain Drive, 14 × 17.5 Tires
-
- Other
-
- Engine Enclosure, Lockable
- Extended Life Antifreeze, –37° C (–34° F)
- Machine Tie Down Points (6)
- Support, Lift Arm
- Hydraulic Oil Level Sight Gauge
- Radiator Coolant Level Sight Gauge
- Radiator, Expansion Bottle
- Cat ToughGuard™ Hose
- Auxiliary, Hydraulics, Continuous Flow
- Heavy Duty, Flat Faced Quick Disconnects with Integrated Pressure Release
- Split D-Ring to Route Work Tool Hoses Along Side of Left Lift Arm
- Electrical Outlet, Beacon
- Belly Pan Cleanout
- Variable Speed Demand Fan
- Product Link™ PL240, Cellular
-
- Mandatory Equipment
-
- Quick Coupler, Mechanical or Powered
- High Visibility Seat Belt, 50 mm (2 in) or 75 mm (3 in)
- PERFORMANCE PACKAGE:
– Performance Package H3: XE Hydraulics, Dual Direction Electronic Self Level (Raise and Lower), Work Tool Return to Dig, Work Tool Positioner, and Electronic Snubbing (Raise and Lower) - COMFORT PACKAGE:
– Enclosed ROPS with A/C (C3): Foot Throttle, Headliner, Heater and Defroster, Side Windows, Cup Holder, Radio Ready, Air Ride Seat (High Back and Heated) and Door (Glass or Polycarbonate)
Optional Equipment:
-
- Optional Equipment
-
- Beacon, Rotating
- Engine Block Heater – 120V
- Oil, Hydraulic, Cold Operation
- Paint, Custom
- Variable Speed Demand Fan with Reversing Functionality
- External Counterweights
- Product Link PL641, Cellular
- Bluetooth® Radio with Microphone (AM/FM/Weather Band Receiver with USB and Auxiliary Input Jack)
PR121 Manual Angle Power Box Rake
- Roller Width
- 84 in
- Overall Width
- 93 in
- Maximum Angle - Right or Left
- 20 degrees
PR123 Hydraulic Angle Power Box Rake
- Roller Width
- 90 in
- Overall Width
- 99 in
- Maximum Angle - Right or Left
- 20 degrees
PR118 Manual Angle Power Box Rake
- Roller Width
- 72 in
- Overall Width
- 81 in
- Maximum Angle - Right or Left
- 20 degrees
PR121 Hydraulic Angle Power Box Rake
- Roller Width
- 84 in
- Overall Width
- 93 in
- Maximum Angle - Right or Left
- 20 degrees
PR118 Hydraulic Angle Power Box Rake
- Roller Width
- 72 in
- Overall Width
- 81 in
- Maximum Angle - Right or Left
- 20 degrees
LR119 Landscape Rake
- Working Width
- 74.1 in
- Bucket Capacity - Struck
- 0.4 yd³
- Weight
- 1439.6 lb
2137 mm (84 in) Industrial Grapple Rake
- Width
- 84 in
- Height
- 33 in
- Weight
- 1115.1 lb
LR116 Landscape Rake
- Working Width
- 62 in
- Bucket Capacity - Struck
- 0.4 yd³
- Weight
- 1311.7 lb
1829 mm (72 in) Industrial Grapple Rake
- Width
- 72 in
- Height
- 33 in
- Weight
- 1069.9 lb
Manual Nursery Fork with Fixed Adjustments
- Overall Length
- 98.1 in
- Overall Width
- 52.2 in
- Weight
- 754 lb
Hydraulic Nursery Fork with Variable Adjustments
- Overall Length
- 98.1 in
- Overall Width
- 52.2 in
- Weight
- 798 lb
1148 mm (45 in) Tree Scoop Bucket
- Length
- 38.7 in
- Height
- 23.4 in
- Overall Width
- 45.2 in
HM418 High Flow XHP Hydraulics Bite Limiter Mulcher
- Overall Width
- 83.5 in
- Working Width
- 71.7 in
- Length
- 53.3 in
HM416 High Flow XHP Hydraulics Mulcher
- Overall Width
- 74.1 in
- Working Width
- 58.6 in
- Length
- 53.3 in
HM418 High Flow XHP Hydraulics Mulcher
- Overall Width
- 83.5 in
- Working Width
- 67.2 in
- Length
- 53.3 in
HM416 High Flow XHP Hydraulics Bite Limiter Mulcher
- Overall Width
- 74.1 in
- Working Width
- 62.3 in
- Length
- 53.3 in
HM316 High Flow XPS Hydraulics Mulcher
- Overall Width
- 74.1 in
- Working Width
- 62.3 in
- Length
- 53.3 in
HM316 High Flow XPS Hydraulics Bite Limiter Mulcher
- Overall Width
- 74.1 in
- Working Width
- 62.3 in
- Length
- 53.3 in
HM115 Standard Flow Mulcher
- Overall Width
- 69.2 in
- Working Width
- 58.3 in
- Length
- 48 in
H55s Hydraulic Hammer
- Operating Weight - With Tool
- 760.6 lb
- Energy Class
- 599.6 ft·lbf
- Machine Class
- 3-6 Ton Mini Excavators, 216-299 Skid Steer/Compact Track Loaders
H65s Hydraulic Hammer
- Operating Weight - With Tool
- 859.8 lb
- Energy Class
- 800.3 ft·lbf
- Machine Class
- 5-9 Ton Mini Excavators, 216-299 Skid Steer/Compact Track Loaders, 415-444 Backhoe Loaders
B8s Silenced Hydraulic Hammer
- Operating Weight - With Tool
- 758.4 lb
- Energy Class
- 848.2 ft·lbf
- Machine Class
- 6-9 Ton Mini Excavators, 216-299 Skid Steer/Compact Track Loaders, 415-444 Backhoe Loaders
B8 Non-Silenced Hydraulic Hammer
- Operating Weight - With Tool
- 771 lb
- Energy Class
- 848.2 ft·lbf
- Machine Class
- 6-9 Ton Mini Excavators, 216-299 Skid Steer/Compact Track Loaders, 415-444 Backhoe Loaders
1676 mm (66 in) Utility Grapple Forks
- Width
- 66 in
- Height - Grapples Closed
- 30.3 in
- Jaw Opening
- 34.5 in
1829 mm (72 in) Utility Grapple Forks
- Width
- 72 in
- Height - Grapples Closed
- 30.3 in
- Jaw Opening
- 34.5 in
1829 mm (72 in) Utility Forks
- Width
- 72 in
- Height
- 22.9 in
- Weight
- 485 lb
1676 mm (66 in) Utility Forks
- Width
- 66 in
- Height
- 22.9 in
- Weight
- 436.5 lb
1070 mm (42 in) Pallet Forks
- Height
- 36.8 in
- Width
- 45.8 in
- Weight
- 211.6 lb
1220 mm (48 in) Pallet Forks
- Height
- 36.8 in
- Width
- 45.8 in
- Weight
- 211.6 lb
1270 mm (50 in) Pallet Fork Carriage
- Height
- 35.9 in
- Width
- 50 in
- Weight
- 207.2 lb
1676 mm (66 in) Industrial Grapple Forks
- Width
- 66 in
- Height - Grapples Closed
- 31.9 in
- Jaw Opening
- 38 in
1829 mm (72 in) Industrial Grapple Forks
- Width
- 72 in
- Height - Grapples Closed
- 32 in
- Jaw Opening
- 38 in
1438 mm (57 in) Heavy Duty Fork Carriage
- Height
- 35.8 in
- Width
- 56.6 in
- Weight
- 319.7 lb
PC406 With Water High Flow XHP Cold Planer
- Working Width
- 23.6 in
- Maximum Cutting Depth
- 6.7 in
- Required Hydraulics
- XHP / XE
PC408 High Flow XHP Cold Planer
- Working Width
- 29.5 in
- Maximum Cutting Depth
- 6.7 in
- Required Hydraulics
- XHP / XE
PC412 High Flow XHP Cold Planer
- Working Width
- 47.2 in
- Maximum Cutting Depth
- 5.1 in
- Required Hydraulics
- XHP / XE
PC406 High Flow XHP Cold Planer
- Working Width
- 23.6 in
- Maximum Cutting Depth
- 6.7 in
- Required Hydraulics
- XHP / XE
PC306 XD High Flow XPS Cold Planer
- Working Width
- 23.6 in
- Maximum Cutting Depth
- 9.8 in
- Required Hydraulics
- High Flow XPS
PC310 High Flow XPS Cold Planer
- Working Width
- 39.4 in
- Maximum Cutting Depth
- 5.1 in
- Required Hydraulics
- High Flow XPS
PC305 High Flow Cold Planer
- Working Width
- 17.7 in
- Maximum Cutting Depth
- 6.7 in
- Required Hydraulics
- High Flow
PC306 High Flow Cold Planer
- Working Width
- 23.6 in
- Maximum Cutting Depth
- 6.7 in
- Required Hydraulics
- High Flow
PC306 With Water High Flow Cold Planer
- Working Width
- 23.6 in
- Maximum Cutting Depth
- 6.7 in
- Required Hydraulics
- High Flow
PC104 Standard Flow Cold Planer
- Working Width
- 13.8 in
- Maximum Cutting Depth
- 5.9 in
- Required Hydraulics
- Standard Flow
PC105 Standard Flow Cold Planer
- Working Width
- 17.7 in
- Maximum Cutting Depth
- 5.9 in
- Required Hydraulics
- Standard Flow
1730 mm (68 in) Utility Grapple Bucket
- Width
- 68.1 in
- Height - Grapples Closed
- 29.1 in
- Jaw Opening
- 35.5 in
1883 mm (74 in) Utility Grapple Bucket
- Width
- 74.1 in
- Height - Grapples Closed
- 29.1 in
- Jaw Opening
- 35.5 in
1730 mm (68 in) Utility Bucket With Bolt-On Cutting Edge
- Width
- 68.1 in
- Capacity
- 0.63 yd³
- Weight
- 569 lb
1883 mm (74 in) Utility Bucket With Bolt-On Cutting Edge
- Width
- 74.1 in
- Capacity
- 0.68 yd³
- Weight
- 609 lb
1168 mm (46 in) Stump Bucket
- Working Width
- 11.8 in
- Overall Width
- 46 in
- Weight
- 357.1 lb
1576 mm (62 in) Utility Bucket With Bolt-On Cutting Edge
- Width
- 62 in
- Capacity
- 0.56 yd³
- Weight
- 529 lb
2397 mm (94 in) Rod Tine Style Skeleton Bucket
- Width
- 94.4 in
- Weight
- 859.8 lb
- Height
- 25.4 in
2349 mm (92 in) Plate Tine Style Skeleton Bucket
- Width
- 92.5 in
- Weight
- 842.2 lb
- Height
- 21.4 in
2016 mm (80 in) Rod Tine Style Skeleton Bucket
- Width
- 79.4 in
- Weight
- 740.8 lb
- Height
- 25.4 in
2206 mm (86 in) Rod Tine Style Skeleton Bucket
- Width
- 86.9 in
- Weight
- 800.3 lb
- Height
- 25.4 in
1849 mm (74 in) Plate Tine Style Skeleton Bucket
- Width
- 72.8 in
- Weight
- 698.9 lb
- Height
- 21.4 in
BD118 Side Discharge Bucket With Sawdust Agitator
- Capacity
- 2 yd³
- Width
- 73.2 in
- Required Hydraulics
- Standard Flow
BD121 Side Discharge Bucket With Sawdust Agitator
- Capacity
- 2.3 yd³
- Width
- 85.2 in
- Required Hydraulics
- Standard Flow
BD121 Side Discharge Bucket With Sand Agitator
- Capacity
- 1.3 yd³
- Width
- 85.2 in
- Required Hydraulics
- Standard Flow
2188 mm (86 in) Multi-Purpose Bucket With Bolt-On Teeth And Spill Guard
- Width
- 86.1 in
- Capacity
- 0.56 yd³
- Weight
- 1018.5 lb
BD118 Side Discharge Bucket With Sand Agitator
- Capacity
- 1 yd³
- Width
- 73.2 in
- Required Hydraulics
- Standard Flow
2188 mm (86 in) Multi-Purpose Bucket With Bolt-On Cutting Edge And Spill Guard
- Width
- 86.1 in
- Capacity
- 0.56 yd³
- Weight
- 1071 lb
2036 mm (80 in) Multi-Purpose Bucket With Bolt-On Teeth And Spill Guard
- Width
- 80.2 in
- Capacity
- 0.52 yd³
- Weight
- 970 lb
2036 mm (80 in) Multi-Purpose Bucket With Bolt-On Cutting Edge And Spill Guard
- Width
- 80.2 in
- Capacity
- 0.52 yd³
- Weight
- 1016 lb
1883 mm (74 in) Multi-Purpose Bucket With Bolt-On Teeth And Spill Guard
- Width
- 74.1 in
- Capacity
- 0.48 yd³
- Weight
- 917.1 lb
1730 mm (68 in) Multi-Purpose Bucket With Bolt-On Teeth And Spill Guard
- Width
- 68.1 in
- Capacity
- 0.44 yd³
- Weight
- 868.6 lb
1883 mm (74 in) Multi-Purpose Bucket With Bolt-On Cutting Edge And Spill Guard
- Width
- 74.1 in
- Capacity
- 0.48 yd³
- Weight
- 961 lb
1576 mm (62 in) Multi-Purpose Bucket With Bolt-On Teeth And Spill Guard
- Width
- 62 in
- Capacity
- 0.39 yd³
- Weight
- 817.9 lb
1730 mm (68 in) Multi-Purpose Bucket With Bolt-On Cutting Edge And Spill Guard
- Width
- 68.1 in
- Capacity
- 0.44 yd³
- Weight
- 906 lb
MB250 Mixing Bucket
- Capacity
- 0.33 yd³
- Width
- 54.7 in
- Required Hydraulics
- Standard Flow
1576 mm (62 in) Multi-Purpose Bucket With Bolt-On Cutting Edge And Spill Guard
- Width
- 62 in
- Capacity
- 0.39 yd³
- Weight
- 851 lb
MB200 Mixing Bucket
- Capacity
- 0.26 yd³
- Width
- 54.6 in
- Required Hydraulics
- Standard Flow
2642 mm (104 in) Material Handling Bucket With Bolt-On Cutting Edge
- Width
- 104 in
- Capacity
- 1.74 yd³
- Weight
- 922 lb
2185 mm (86 in) Material Handling Bucket With Bolt-On Cutting Edge
- Width
- 86 in
- Capacity
- 1.4 yd³
- Weight
- 805 lb
2490 mm (98 in) Material Handling Bucket With Bolt-On Cutting Edge
- Width
- 98 in
- Capacity
- 1.63 yd³
- Weight
- 882 lb
1883 mm (74 in) Low Profile Bucket With Bolt-On Cutting Edge
- Width
- 74 in
- Capacity
- 0.54 yd³
- Weight
- 547 lb
2036 mm (80 in) Low Profile Bucket With Bolt-On Cutting Edge
- Width
- 80 in
- Capacity
- 0.58 yd³
- Weight
- 584 lb
1421 mm (56 in) Low Profile Bucket With Bolt-On Cutting Edge
- Width
- 56 in
- Capacity
- 0.39 yd³
- Weight
- 392 lb
1576 mm (62 in) Low Profile Bucket With Bolt-On Cutting Edge
- Width
- 62 in
- Capacity
- 0.44 yd³
- Weight
- 452 lb
1730 mm (68 in) Low Profile Bucket With Bolt-On Cutting Edge
- Width
- 68 in
- Capacity
- 0.48 yd³
- Weight
- 512 lb
2185 mm (86 in) Light Material Bucket With Bolt-On Cutting Edge
- Width
- 86 in
- Capacity
- 1.1 yd³
- Weight
- 747 lb
2490 mm (98 in) Light Material Bucket With Bolt-On Cutting Edge
- Width
- 98 in
- Capacity
- 1.22 yd³
- Weight
- 822 lb
1883 mm (74 in) Light Material Bucket With Bolt-On Cutting Edge
- Width
- 74.1 in
- Capacity
- 0.9 yd³
- Weight
- 666 lb
2036 mm (80 in) Light Material Bucket With Bolt-On Cutting Edge
- Width
- 80.2 in
- Capacity
- 0.98 yd³
- Weight
- 706 lb
2188 mm (86 in) Industrial Performance Bucket With Bolt-On Teeth
- Width
- 86.1 in
- Capacity
- 0.88 yd³
- Weight
- 762.8 lb
2340 mm (92 in) Industrial Performance Bucket With Bolt-On Cutting Edge
- Width
- 92.1 in
- Capacity
- 0.94 yd³
- Weight
- 855.4 lb
2340 mm (92 in) Industrial Performance Bucket With Bolt-On Teeth
- Width
- 92.1 in
- Capacity
- 0.94 yd³
- Weight
- 795.9 lb
2036 mm (80 in) Industrial Performance Bucket With Bolt-On Teeth
- Width
- 80.2 in
- Capacity
- 0.81 yd³
- Weight
- 729.7 lb
2188 mm (86 in) Industrial Performance Bucket With Bolt-On Cutting Edge
- Width
- 86.1 in
- Capacity
- 0.88 yd³
- Weight
- 815.7 lb
1883 mm (74 in) Industrial Performance Bucket With Bolt-On Teeth
- Width
- 74.1 in
- Capacity
- 0.75 yd³
- Weight
- 694.5 lb
2036 mm (80 in) Industrial Performance Bucket With Bolt-On Cutting Edge
- Width
- 80.2 in
- Capacity
- 0.81 yd³
- Weight
- 778.2 lb
1730 mm (68 in) Industrial Performance Bucket With Bolt-On Teeth
- Width
- 68.1 in
- Capacity
- 0.68 yd³
- Weight
- 663.6 lb
1883 mm (74 in) Industrial Performance Bucket With Bolt-On Cutting Edge
- Width
- 74.1 in
- Capacity
- 0.75 yd³
- Weight
- 740.8 lb
1730 mm (68 in) Industrial Performance Bucket With Bolt-On Cutting Edge
- Width
- 68.1 in
- Capacity
- 0.68 yd³
- Weight
- 701.1 lb
2036 mm (80 in) Industrial Grapple Bucket With Bolt-On Cutting Edge
- Width
- 80.2 in
- Weight
- 1201.5 lb
- Height - Grapples Closed
- 20.7 in
1576 mm (62 in) Industrial Grapple Bucket With Bolt-On Cutting Edge
- Width
- 62 in
- Weight
- 1062.6 lb
- Height - Grapples Closed
- 20.7 in
1730 mm (68 in) Industrial Grapple Bucket With Bolt-On Cutting Edge
- Width
- 68.1 in
- Weight
- 1111.1 lb
- Height - Grapples Closed
- 20.7 in
1883 mm (74 in) Industrial Grapple Bucket With Bolt-On Cutting Edge
- Width
- 74.1 in
- Weight
- 1159.6 lb
- Height - Grapples Closed
- 20.7 in
2188 mm (86 in) General Purpose Bucket With Bolt-On Cutting Edge
- Width
- 86.1 in
- Capacity
- 0.82 yd³
- Weight
- 723.1 lb
2188 mm (86 in) General Purpose Bucket With Bolt-On Teeth
- Width
- 86.1 in
- Capacity
- 0.82 yd³
- Weight
- 670.2 lb
2036 mm (80 in) General Purpose Bucket With Bolt-On Cutting Edge
- Width
- 80.2 in
- Capacity
- 0.63 yd³
- Weight
- 630.5 lb
2036 mm (80 in) General Purpose Bucket With Bolt-On Teeth
- Width
- 80.2 in
- Capacity
- 0.63 yd³
- Weight
- 582 lb
1883 mm (74 in) General Purpose Bucket With Bolt-On Cutting Edge
- Width
- 74.1 in
- Capacity
- 0.58 yd³
- Weight
- 597.5 lb
1883 mm (74 in) General Purpose Bucket With Bolt-On Teeth
- Width
- 74.1 in
- Capacity
- 0.58 yd³
- Weight
- 549 lb
1730 mm (68 in) General Purpose Bucket With Bolt-On Cutting Edge
- Width
- 68.1 in
- Capacity
- 0.52 yd³
- Weight
- 551.2 lb
1730 mm (68 in) General Purpose Bucket With Bolt-On Teeth
- Width
- 68.1 in
- Capacity
- 0.52 yd³
- Weight
- 509.3 lb
1576 mm (62 in) General Purpose Bucket With Bolt-On Cutting Edge
- Width
- 62 in
- Capacity
- 0.47 yd³
- Weight
- 440.9 lb
1576 mm (62 in) General Purpose Bucket With Bolt-On Teeth
- Width
- 62 in
- Capacity
- 0.47 yd³
- Weight
- 407.9 lb
1150 mm (45 in) Concrete Slab Bucket
- Width
- 23.9 in
- Maximum Slab Thickness
- 8 in
- Overall Width
- 45.3 in
BRX118 Industrial Brushcutter
- Overall Width
- 75.2 in
- Cutting Width
- 72 in
- Maximum Cutting Diameter
- 8 in
BRX318 Industrial Brushcutter
- Overall Width
- 75.2 in
- Cutting Width
- 72 in
- Maximum Cutting Diameter
- 8 in
BRX418 Industrial Brushcutter
- Overall Width
- 75.2 in
- Cutting Width
- 72 in
- Maximum Cutting Diameter
- 8 in
BR120 Brushcutter
- Overall Width
- 79.7 in
- Cutting Width
- 78 in
- Maximum Cutting Diameter
- 3 in
BR318 Brushcutter
- Overall Width
- 74 in
- Cutting Width
- 72 in
- Maximum Cutting Diameter
- 3 in
BR320 Brushcutter
- Overall Width
- 79.7 in
- Cutting Width
- 78 in
- Maximum Cutting Diameter
- 3 in
BR117 Brushcutter
- Overall Width
- 68 in
- Cutting Width
- 66 in
- Maximum Cutting Diameter
- 3 in
BR118 Brushcutter
- Overall Width
- 74 in
- Cutting Width
- 72 in
- Maximum Cutting Diameter
- 3 in
BU118 Utility Broom with Polypropylene Bristles
- Overall Width
- 83.3 in
- Sweeping Width
- 70.9 in
- Brush Diameter
- 26.2 in
BU118 Utility Broom
- Overall Width
- 83.3 in
- Sweeping Width
- 73.4 in
- Brush Diameter
- 26 in
BU115 Utility Broom with Polypropylene Bristles
- Overall Width
- 71.3 in
- Sweeping Width
- 59.1 in
- Brush Diameter
- 26.2 in
BU115 Utility Broom
- Overall Width
- 71.3 in
- Sweeping Width
- 59.4 in
- Brush Diameter
- 26 in
BP115C Pickup Broom
- Overall Width
- 78.3 in
- Sweeping Width
- 60 in
- Brush Diameter
- 26 in
BP118C Pickup Broom
- Overall Width
- 90.4 in
- Sweeping Width
- 72 in
- Brush Diameter
- 26 in
BA118C Manual Angle Broom
- Overall Width
- 104 in
- Sweeping Width
- 83 in
- Brush Diameter
- 32 in
BA118C Hydraulic Angle Broom
- Overall Width
- 104 in
- Sweeping Width
- 83 in
- Brush Diameter
- 32 in
GB120 Grader Blade
- Overall Width
- 78.4 in
- Blade Width
- 78 in
- Width - Fully Angled
- 68.8 in
GB120 Grader Blade with Wings and Smart Technology
- Overall Width
- 84.6 in
- Blade Width
- 78 in
- Width - Fully Angled
- 90.2 in
GB124 Grader Blade
- Overall Width
- 96.4 in
- Blade Width
- 96 in
- Width - Fully Angled
- 84.4 in
GB124 Grader Blade with Wings and Smart Technology
- Overall Width
- 102.6 in
- Blade Width
- 96 in
- Width - Fully Angled
- 105.8 in
2337 mm (92 in) Dozer Blade
- Blade Width
- 92 in
- Width - Fully Angled
- 80.7 in
- Maximum Blade Angle - Right/Left of Center
- 30 degrees
2007 mm (79 in) Dozer Blade
- Blade Width
- 79 in
- Width - Fully Angled
- 68.9 in
- Maximum Blade Angle - Right/Left of Center
- 30 degrees
BB124 Box Blade
- Overall Width
- 99.4 in
- Working Width
- 95.9 in
- Optimal Hydraulic Flow
- 30-85 L/min (8-22 gpm)
BB121 Box Blade
- Overall Width
- 87.4 in
- Working Width
- 83.9 in
- Optimal Hydraulic Flow
- 30-85 L/min (8-22 gpm)
1829 mm (72 in) Angle Blade
- Blade Width
- 72 in
- Width - Fully Angled
- 66.3 in
- Maximum Blade Angle - Right/Left of Center
- 30 degrees
2134 mm (84 in) Angle Blade
- Blade Width
- 84 in
- Width - Fully Angled
- 76.7 in
- Maximum Blade Angle - Right/Left of Center
- 30 degrees
1140 mm (45 in) Dual Tine Bale Spear
- Overall Width
- 55.4 in
- Overall Height
- 51.8 in
- Capacity
- 3007.1 lb
890 mm (35 in) Dual Tine Bale Spear
- Overall Width
- 55.4 in
- Overall Height
- 51.8 in
- Capacity
- 3007.1 lb
1140 mm (45 in) Single Tine Bale Spear
- Overall Width
- 50.6 in
- Overall Height
- 22.4 in
- Capacity
- 2004 lb
1803 mm (71 in) Bale Grab
- Overall Width
- 55.2 in
- Overall Height
- 34.4 in
- Maximum Opening Width
- 71 in
2133 mm (84 in) Bale Grab
- Overall Width
- 55.2 in
- Overall Height
- 34.4 in
- Maximum Opening Width
- 84 in
890 mm (35 in) Single Tine Bale Spear
- Overall Width
- 50.6 in
- Overall Height
- 22.4 in
- Capacity
- 2004 lb
BH130 Backhoe with Smart Technology
- Maximum Digging Depth
- 117 in
- Operating Weight
- 2325.9 lb
- Overall Length
- 87 in
A68 Auger
- Drive Shaft Torque at Maximum Pressure
- 5034.6 lb/ft
- Drive Method
- Gerotor Motor - Double Planetary Drive
- Mounting Bracket Design
- Skid Steer Loader Coupler
A41 Auger
- Drive Shaft Torque at Maximum Pressure
- 3037.3 lb/ft
- Drive Method
- Gerotor Motor - Single Planetary Reduction
- Mounting Bracket Design
- Skid Steer Loader Coupler
A23 Auger
- Drive Shaft Torque at Maximum Pressure
- 1699.3 lb/ft
- Drive Method
- Gerotor Motor - Direct Drive
- Mounting Bracket Design
- Skid Steer Loader Coupler
SG16 Stump Grinder
- Required Hydraulics
- Standard Flow
- Cutting Wheel Diameter - With Teeth
- 21.5 in
- Cutting Depth - Below Ground
- 20.5 in
SG36 Stump Grinder
- Required Hydraulics
- High Flow XPS
- Cutting Wheel Diameter - With Teeth
- 21.5 in
- Cutting Depth - Below Ground
- 20.5 in
3.66 m (12 ft) Straight Snow Push with rubber cutting edge
- Working Width
- 144 in
- Weight
- 952.4 lb
- Length
- 43.7 in
3.66 m (12 ft) Straight Snow Push with steel trip edge
- Working Width
- 144 in
- Weight
- 1402.1 lb
- Length
- 45 in
3.05 m (10 ft) Straight Snow Push with rubber cutting edge
- Working Width
- 120 in
- Weight
- 866.4 lb
- Length
- 43.7 in
3.66 m (12 ft) Straight Snow Push with rubber trip edge
- Working Width
- 144 in
- Weight
- 1347 lb
- Length
- 45 in
3.05 m (10 ft) Straight Snow Push with steel trip edge
- Working Width
- 120 in
- Weight
- 1201.5 lb
- Length
- 45 in
3.05 m (10 ft) Straight Snow Push with rubber trip edge
- Working Width
- 120 in
- Weight
- 1153 lb
- Length
- 45 in
2.44 m (8 ft) Straight Snow Push with rubber cutting edge
- Working Width
- 96 in
- Weight
- 778.2 lb
- Length
- 43.7 in
2.44 m (8 ft) Straight Snow Push with steel trip edge
- Working Width
- 96 in
- Weight
- 1082.5 lb
- Length
- 45 in
2.44 m (8 ft) Straight Snow Push with rubber trip edge
- Working Width
- 96 in
- Weight
- 1036.2 lb
- Length
- 45 in
2.4 m (8 ft) Snow Wing
- Working Width (Wings Closed)
- 96.5 in
- Overall Width (Wings Closed)
- 104.2 in
- Overall Width (Wings Open)
- 161.7 in
2.8 m (9 ft) Snow Wing
- Working Width (Wings Closed)
- 108.5 in
- Overall Width (Wings Closed)
- 116.2 in
- Overall Width (Wings Open)
- 173.7 in
3.0 m (10 ft) Snow Plow
- Width
- 119.9 in
- Angled Width
- 98.3 in
- Weight
- 1217 lb
2.7 m (9 ft) Snow Plow
- Width
- 108 in
- Angled Width
- 88.5 in
- Weight
- 1161.8 lb
1.8 m (6 ft) Snow Plow
- Width
- 71.9 in
- Angled Width
- 59 in
- Weight
- 992.1 lb
2.1 m (7 ft) Snow Plow
- Width
- 84 in
- Angled Width
- 68.8 in
- Weight
- 1051.6 lb
2.4 m (8 ft) Snow Plow
- Width
- 95.9 in
- Angled Width
- 78.6 in
- Weight
- 1106.7 lb
SR321 Snow Blower
- Intake Width
- 76.5 in
- Overall Width
- 85.9 in
- Weight
- 1016.3 lb
SR418 Snow Blower
- Intake Width
- 76.5 in
- Overall Width
- 85.9 in
- Weight
- 1016.3 lb
SR421 Snow Blower
- Intake Width
- 76.5 in
- Overall Width
- 85.9 in
- Weight
- 1016.3 lb
SR121 Snow Blower
- Intake Width
- 76.5 in
- Overall Width
- 85.9 in
- Weight
- 974.4 lb
SR318 Snow Blower
- Intake Width
- 63.5 in
- Overall Width
- 73.9 in
- Weight
- 996.5 lb
2134 mm (84 in) Multi V-Plow
- Straight Width
- 84 in
- Angled Width
- 73 in
- Interface Type
- Skid Steer Coupler
SR318 Snow Blower
- Intake Width
- 50.8 in
- Overall Width
- 61.9 in
- Weight
- 934.8 lb
SR118 Snow Blower
- Intake Width
- 63.5 in
- Overall Width
- 73.9 in
- Weight
- 954.6 lb
1524 mm (60 in) Multi V-Plow
- Straight Width
- 60 in
- Angled Width
- 53 in
- Interface Type
- Skid Steer Coupler
S308 Mobile Scrap & Demolition Shear
- Tip Force
- 43.3 Sh Ton
- Rotation
- 360 Degrees
- Jaw Opening
- 9.4 in
SW380, 250 mm (10 in) Wheel Saw
- Maximum Cutting Depth
- 31.5 in
- Wheel Width
- 9.8 in
- Weight
- 3196.7 lb
SW360, 200 mm (8 in) Wheel Saw
- Maximum Cutting Depth
- 23.6 in
- Wheel Width
- 7.9 in
- Weight
- 2921.1 lb
SW360, 80 mm (3 in) Wheel Saw
- Maximum Cutting Depth
- 23.6 in
- Wheel Width
- 3.1 in
- Weight
- 3174.7 lb
SW360, 130 mm (5 in) Wheel Saw
- Maximum Cutting Depth
- 23.6 in
- Wheel Width
- 5.1 in
- Weight
- 3009.3 lb
SW360, 100 mm (4 in) Wheel Saw
- Maximum Cutting Depth
- 23.6 in
- Wheel Width
- 3.9 in
- Weight
- 2943.2 lb
SW360, 160 mm (6 in) Wheel Saw
- Maximum Cutting Depth
- 23.6 in
- Wheel Width
- 6.3 in
- Weight
- 2899.1 lb
SW345, 80 mm (3 in) Wheel Saw
- Maximum Cutting Depth
- 17.7 in
- Wheel Width
- 3.1 in
- Weight
- 2482.4 lb
SW345, 130 mm (5 in) Wheel Saw
- Maximum Cutting Depth
- 17.7 in
- Wheel Width
- 5.1 in
- Weight
- 2239.9 lb
T315 High Flow Trencher with standard teeth
- Standard Boom Length
- 60 in
- Cutting Width
- 8 in
- Chain Type
- Standard
T315 High Flow Trencher with combo teeth
- Standard Boom Length
- 60 in
- Cutting Width
- 6 in
- Chain Type
- Standard
T315 High Flow Trencher with no chain
- Standard Boom Length
- 60 in
- Required Hydraulics
- High Flow XPS
- Overall Width
- 74.8 in
T112 Manual Trencher with standard teeth
- Standard Boom Length
- 48 in
- Cutting Width
- 6 in
- Chain Type
- Standard
T112 Manual Trencher with rockfrost teeth
- Standard Boom Length
- 48 in
- Cutting Width
- 6 in
- Chain Type
- Rockfrost
T315 High Flow Trencher with standard teeth
- Standard Boom Length
- 60 in
- Cutting Width
- 6 in
- Chain Type
- Standard
T112 Hydraulic Trencher with standard teeth
- Standard Boom Length
- 48 in
- Cutting Width
- 6 in
- Chain Type
- Standard
T112 Manual Trencher with combo teeth
- Standard Boom Length
- 48 in
- Cutting Width
- 6 in
- Chain Type
- Combo
T112 Manual Trencher with no chain
- Standard Boom Length
- 48 in
- Required Hydraulics
- Standard Flow
- Overall Width
- 74.8 in
T112 Hydraulic Trencher with rockfrost teeth
- Standard Boom Length
- 48 in
- Cutting Width
- 6 in
- Chain Type
- Rockfrost
T112 Hydraulic Trencher with combo teeth
- Standard Boom Length
- 48 in
- Cutting Width
- 6 in
- Chain Type
- Combo
T112 Hydraulic Trencher with no chain
- Standard Boom Length
- 48 in
- Required Hydraulics
- Standard Flow
- Overall Width
- 74.8 in
T109 Manual Trencher with standard teeth
- Standard Boom Length
- 36 in
- Cutting Width
- 8 in
- Chain Type
- Standard
T112 Hydraulic Trencher with standard teeth
- Standard Boom Length
- 48 in
- Cutting Width
- 8 in
- Chain Type
- Standard
T109 Manual Trencher with no chain
- Standard Boom Length
- 36 in
- Required Hydraulics
- Standard Flow
- Overall Width
- 56.1 in
T109 Manual Trencher with terminator teeth
- Standard Boom Length
- 36 in
- Cutting Width
- 6 in
- Chain Type
- Terminator
T109 Manual Trencher with rockfrost teeth
- Standard Boom Length
- 36 in
- Cutting Width
- 6 in
- Chain Type
- Rockfrost
T109 Manual Trencher with standard teeth
- Standard Boom Length
- 36 in
- Cutting Width
- 6 in
- Chain Type
- Standard
T109 Hydraulic Trencher with standard teeth
- Standard Boom Length
- 36 in
- Cutting Width
- 6 in
- Chain Type
- Standard
T109 Manual Trencher with combo teeth
- Standard Boom Length
- 36 in
- Cutting Width
- 6 in
- Chain Type
- Combo
T109 Hydraulic Trencher with no chain
- Standard Boom Length
- 36 in
- Required Hydraulics
- Standard Flow
- Overall Width
- 56.1 in
T109 Hydraulic Trencher with combo teeth
- Standard Boom Length
- 36 in
- Cutting Width
- 6 in
- Chain Type
- Combo
T109 Hydraulic Trencher with rockfrost teeth
- Standard Boom Length
- 36 in
- Cutting Width
- 6 in
- Chain Type
- Rockfrost
T109 Hydraulic Trencher with standard teeth
- Standard Boom Length
- 36 in
- Cutting Width
- 8 in
- Chain Type
- Standard
T109 Hydraulic Trencher with terminator teeth
- Standard Boom Length
- 36 in
- Cutting Width
- 6 in
- Chain Type
- Terminator
LT114 Landscape Tiller
- Working Width
- 53.3 in
- Working Depth
- 25-152 mm (1-6 in)
- Weight
- 925.9 lb
LT118 Landscape Tiller
- Working Width
- 72.8 in
- Working Depth
- 25-152 mm (1-6 in)
- Weight
- 925.9 lb
1576 mm (62 in) General Purpose Bucket
- Width
- 62 in
- Capacity
- 0.47 yd³
- Weight
- 374.8 lb
1730 mm (68 in) Utility Bucket
- Width
- 68.1 in
- Capacity
- 0.63 yd³
- Weight
- 496 lb
1883 mm (74 in) Utility Bucket
- Width
- 74.1 in
- Capacity
- 0.68 yd³
- Weight
- 526.9 lb
1576 mm (62 in) Utility Bucket
- Width
- 62 in
- Capacity
- 0.56 yd³
- Weight
- 463 lb
1883 mm (74 in) Light Material Bucket
- Width
- 74.1 in
- Capacity
- 0.9 yd³
- Weight
- 586.4 lb
2036 mm (80 in) Light Material Bucket
- Width
- 80.2 in
- Capacity
- 0.98 yd³
- Weight
- 619.5 lb
1730 mm (68 in) Industrial Grapple Bucket
- Width
- 68.1 in
- Weight
- 1038.4 lb
- Height - Grapples Closed
- 20.7 in
1883 mm (74 in) Industrial Grapple Bucket
- Width
- 74.1 in
- Weight
- 1080.3 lb
- Height - Grapples Closed
- 20.7 in
2035 mm (80 in) Industrial Grapple Bucket
- Width
- 80.2 in
- Weight
- 1115.5 lb
- Height - Grapples Closed
- 20.7 in
2188 mm (86 in) General Purpose Bucket
- Width
- 86.1 in
- Capacity
- 0.82 yd³
- Weight
- 634.9 lb
1576 mm (62 in) Industrial Grapple Bucket
- Width
- 62 in
- Weight
- 996.5 lb
- Height - Grapples Closed
- 20.7 in
1730 mm (68 in) General Purpose Bucket
- Width
- 68.1 in
- Capacity
- 0.52 yd³
- Weight
- 476.2 lb
1883 mm (74 in) General Purpose Bucket
- Width
- 74.1 in
- Capacity
- 0.58 yd³
- Weight
- 515.9 lb
2036 mm (80 in) General Purpose Bucket
- Width
- 80.2 in
- Capacity
- 0.63 yd³
- Weight
- 544.5 lb