The Cat® 262D3 Skid Steer Loader, with its vertical lift design, delivers extended reach and lift height for quick and easy truck loading. Its stability and lifting performance provides excellent material handling.
|
|
|
|
Engine
- Gross Power - SAE J1995
- 74.3HP
- Net Power - SAE 1349
- 72.9HP
- Displacement
- 203in³
- Stroke
- 4.7in
- Bore
- 3.7in
- Peak Torque - 1,500 rpm - SAE J1995
- 195ft·lbf
- Net Power - ISO 9249
- 73.7HP
- Engine Model
- Cat C3.3B DIT (turbo)
- Net Flywheel Power
- 72.9HP
Operating Specifications
- Rated Operating Capacity
- 2700lb
- Rated Operating Capacity with Optional Counterweight
- 3055lb
- Tipping Load
- 5400lb
- Breakout Force - Tilt Cylinder
- 7355lb
- Note
- Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS, 1730 mm (68 in) low profile bucket, Cat PC 12 × 16.5 tires, standard flow hydraulics, mechanical suspension seat, no optional cou
Weights
- Operating Weight
- 8296lb
- Note
- Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS, 1730 mm (68 in) low profile bucket, Cat PC 12 × 16.5 tires, standard flow hydraulics, mechanical suspension seat, no optional cou
Dimensions
- Wheel Base
- 49.2in
- Length - With Bucket on Ground
- 146.2in
- Length - Without Bucket
- 117.9in
- Height - Top of Cab
- 83.1in
- Vehicle Width over Tires
- 66in
- Maximum Overall Height
- 157.8in
- Bucket Pin Height - Maximum Lift
- 124.9in
- Bucket Pin Height - Carry Position
- 7.9in
- Reach - Maximum Lift/Dump
- 30.9in
- Clearance at Maximum Lift and Dump
- 93.7in
- Ground Clearance
- 8.9in
- Departure Angle
- 26°
- Bumper Overhang - Rear Axle
- 42.6in
- Maximum Dump Angle
- 51°
- Rack Back Angle - Maximum Height
- 84°
- Bucket Pin Reach - Maximum Lift
- 15.5in
- Turning Radius from Center - Bucket
- 85.9in
- Turning Radius from Center - Coupler
- 55.2in
- Note
- Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS, 1730 mm (68 in) low profile bucket, Cat PC 12 × 16.5 tires, standard flow hydraulics, mechanical suspension seat, no optional cou
- Maximum Reach - With Arms Parallel to Ground
- 50.9in
- Turning Radius from Center - Machine Rear
- 71.1in
Cab
- ROPS
- ISO 3471:2008
- FOPS
- ISO 3449:2005 Level I
Service Refill Capacities
- Chain Box - Each Side
- 3.3gal (US)
- Cooling System
- 3.7gal (US)
- Engine Crankcase
- 3gal (US)
- Fuel Tank
- 27.7gal (US)
- Hydraulic System
- 13.7gal (US)
- Hydraulic Tank
- 10.3gal (US)
Noise Level
- Note (1)
- Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
- Inside Cab*
- 81dB(A)
- Note (2)
- *The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan spee
- Outside Cab**
- 101dB(A)
- Note (3)
- **The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.
Air Conditioning System (if equipped)
- Air Conditioning
- The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.0 kg of refrigerant which has a CO2 equivalent of 1.430 metric tonnes.
Hydraulic System
- Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Pressure
- 4061psi
- Hydraulic Flow - High Flow XPS - Hydraulic Power (Calculated)
- 76HP
- Hydraulic Flow - Standard - Hydraulic Power (Calculated)
- 44HP
- Hydraulic Flow - Standard - Loader Hydraulic Pressure
- 3335psi
- Hydraulic Flow - Standard - Loader Hydraulic Flow
- 23gal/min
- Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Flow
- 32gal/min
Power Train
- Travel Speed - Forward or Reverse - Two Speed Option
- 11mile/h
- Travel Speed - Forward or Reverse - One Speed
- 7.7mile/h
Standard Equipment:
-
- Electrical
-
- 12 volt Electrical System
- 80 ampere Alternator
- Ignition Key Start/Stop Switch
- Lights: Gauge Backlighting, Two Rear Tail Lights, Two Rear Halogen Working Lights, Two Adjustable Front Halogen Lights, Dome Light
- Backup Alarm
- Heavy Duty Battery, 850 CCA
-
- Operator Environment
-
- Advanced Display with Rearview Camera: Full Color, 127 mm (5 in) LCD screen; Advanced Multi-operator Security System; On-screen Adjustments for Implement Response, Hystat Response and Creep Control
- Gauges: Fuel Level, Hour Meter
- Operator Warning System Indicators: Air Filter Restriction, Alternator Output, Armrest Raised/Operator Out of Seat, Engine Coolant Temperature, Engine Oil Pressure, Glow Plug Activation, Hydraulic Filter Restriction, Hydraulic Oil Temperature, Park Brake Engaged, Engine Emission System
- Adjustable Vinyl Seat
- Fold In Ergonomic Contoured Armrest
- Control Interlock System, when operator leaves seat or armrest raised: Hydraulic System Disables, Hydrostatic Transmission Disables, Parking Brake Engages
- ROPS Cab, Open, Tilt Up
- FOPS, Level I
- Top and Rear Windows
- Floor Mat
- Interior Rearview Mirror
- 12 volt Electric Socket
- Horn
- Hand (Dial) Throttle, Electronic
- Adjustable Joystick Controls
- Anti-theft Security System with 6-button Keypad
- Storage Compartment with Netting
-
- Power Train
-
- Cat C3.3B, Turbo Diesel Engine, Meeting Tier 4 Final and Stage V Emission Standards
- Air Cleaner, Dual Element, Radial Seal
- S·O·SSM Sampling Valve, Hydraulic Oil
- Filters, Cartridge-type, Hydraulic
- Filters, Canister-type, Fuel and Water Separator
- Radiator/Hydraulic Oil Cooler (side-by-side)
- Spring Applied, Hydraulically Released Parking Brakes
- Hydrostatic Transmission
- Four Wheel Chain Drive
-
- Other
-
- Engine Enclosure, Lockable
- Extended Life Antifreeze, –37° C (–34° F)
- Machine Tie Down Points (6)
- Support, Lift Arm
- Hydraulic Oil Level Sight Gauge
- Radiator Coolant Level Sight Gauge
- Radiator, Expansion Bottle
- Cat ToughGuard™ Hose
- Auxiliary, Hydraulics, Continuous Flow
- Heavy Duty, Flat Faced Quick Disconnects with Integrated Pressure Release
- Split D-Ring to Route Work Tool Hoses Along Side of Left Lift Arm
- Electrical Outlet, Beacon
- Belly Pan Cleanout
- Variable Speed Demand Fan
- Product Link™ PL240, Cellular
-
- Mandatory Equipment
-
- Hydraulics, Standard or High Flow XPS
- Quick Coupler, Mechanical or Powered
- High Visibility Seat Belt, 50 mm (2 in) or 75 mm (3 in)
- Power Train: One Speed, One Speed with Ride Control, Two Speed or Two Speed with Ride Control
- PERFORMANCE PACKAGES:
– Performance Package H1: Standard Flow Hydraulics (No Self Level)
– Performance Package H2: Standard Flow, Dual Direction Electronic Self Level (Raise and Lower), Work Tool Return to Dig, Work Tool Positioner, and Electronic Snubbing (Raise and Lower)
– Performance Package H3: High Flow XPS, Dual Direction Electronic Self Level (Raise and Lower), Work Tool Return to Dig, Work Tool Positioner, and Electronic Snubbing (Raise and Lower) - COMFORT PACKAGES:
– Open ROPS (C0): Static Seat (No Foot Throttle, Headliner, Heater or Door)
– Open ROPS (C1): Foot Throttle, Headliner, Cup Holder, and choice of Seat (Mechanical Suspension or High Back, Heated, Air Ride Seat) (No Heater or Door)
– Enclosed ROPS with Heater (C2): Foot Throttle, Headliner, Heater and Defroster, Side Windows, Cup Holder, Radio Ready, choice of Seat (Mechanical Suspension or High Back, Heated, Air Ride Seat) and Door (Glass or Polycarbonate)
– Enclosed ROPS with A/C (C3): C2 + Air Conditioner
Optional Equipment:
-
- Optional Equipment
-
- Hand-Foot Style Controls
- External Counterweights
- Beacon, Rotating
- Engine Block Heater – 120V
- Oil, Hydraulic, Cold Operation
- Paint, Custom
- Heavy Duty Battery, 1,000 CCA
- Product Link PL641, Cellular
- Bluetooth® Radio with Microphone (AM/FM/Weather Band Receiver with USB and Auxiliary Input Jack)
PR121 Manual Angle Power Box Rake
- Roller Width
- 84 in
- Overall Width
- 93 in
- Maximum Angle - Right or Left
- 20 degrees
PR123 Hydraulic Angle Power Box Rake
- Roller Width
- 90 in
- Overall Width
- 99 in
- Maximum Angle - Right or Left
- 20 degrees
PR118 Manual Angle Power Box Rake
- Roller Width
- 72 in
- Overall Width
- 81 in
- Maximum Angle - Right or Left
- 20 degrees
PR121 Hydraulic Angle Power Box Rake
- Roller Width
- 84 in
- Overall Width
- 93 in
- Maximum Angle - Right or Left
- 20 degrees
PR118 Hydraulic Angle Power Box Rake
- Roller Width
- 72 in
- Overall Width
- 81 in
- Maximum Angle - Right or Left
- 20 degrees
LR119 Landscape Rake
- Working Width
- 74.1 in
- Bucket Capacity - Struck
- 0.4 yd³
- Weight
- 1439.6 lb
2137 mm (84 in) Industrial Grapple Rake
- Width
- 84 in
- Height
- 33 in
- Weight
- 1115.1 lb
LR116 Landscape Rake
- Working Width
- 62 in
- Bucket Capacity - Struck
- 0.4 yd³
- Weight
- 1311.7 lb
1829 mm (72 in) Industrial Grapple Rake
- Width
- 72 in
- Height
- 33 in
- Weight
- 1069.9 lb
Manual Nursery Fork with Fixed Adjustments
- Overall Length
- 98.1 in
- Overall Width
- 52.2 in
- Weight
- 754 lb
Hydraulic Nursery Fork with Variable Adjustments
- Overall Length
- 98.1 in
- Overall Width
- 52.2 in
- Weight
- 798 lb
1148 mm (45 in) Tree Scoop Bucket
- Length
- 38.7 in
- Height
- 23.4 in
- Overall Width
- 45.2 in
HM316 High Flow XPS Hydraulics Mulcher
- Overall Width
- 74.1 in
- Working Width
- 62.3 in
- Length
- 53.3 in
HM316 High Flow XPS Hydraulics Bite Limiter Mulcher
- Overall Width
- 74.1 in
- Working Width
- 62.3 in
- Length
- 53.3 in
HM115 Standard Flow Mulcher
- Overall Width
- 69.2 in
- Working Width
- 58.3 in
- Length
- 48 in
H55s Hydraulic Hammer
- Operating Weight - With Tool
- 760.6 lb
- Energy Class
- 599.6 ft·lbf
- Machine Class
- 3-6 Ton Mini Excavators, 216-299 Skid Steer/Compact Track Loaders
H65s Hydraulic Hammer
- Operating Weight - With Tool
- 859.8 lb
- Energy Class
- 800.3 ft·lbf
- Machine Class
- 5-9 Ton Mini Excavators, 216-299 Skid Steer/Compact Track Loaders, 415-444 Backhoe Loaders
B8s Silenced Hydraulic Hammer
- Operating Weight - With Tool
- 758.4 lb
- Energy Class
- 848.2 ft·lbf
- Machine Class
- 6-9 Ton Mini Excavators, 216-299 Skid Steer/Compact Track Loaders, 415-444 Backhoe Loaders
B8 Non-Silenced Hydraulic Hammer
- Operating Weight - With Tool
- 771 lb
- Energy Class
- 848.2 ft·lbf
- Machine Class
- 6-9 Ton Mini Excavators, 216-299 Skid Steer/Compact Track Loaders, 415-444 Backhoe Loaders
1676 mm (66 in) Utility Grapple Forks
- Width
- 66 in
- Height - Grapples Closed
- 30.3 in
- Jaw Opening
- 34.5 in
1829 mm (72 in) Utility Grapple Forks
- Width
- 72 in
- Height - Grapples Closed
- 30.3 in
- Jaw Opening
- 34.5 in
1829 mm (72 in) Utility Forks
- Width
- 72 in
- Height
- 22.9 in
- Weight
- 485 lb
1676 mm (66 in) Utility Forks
- Width
- 66 in
- Height
- 22.9 in
- Weight
- 436.5 lb
1070 mm (42 in) Pallet Forks
- Height
- 36.8 in
- Width
- 45.8 in
- Weight
- 211.6 lb
1220 mm (48 in) Pallet Forks
- Height
- 36.8 in
- Width
- 45.8 in
- Weight
- 211.6 lb
1270 mm (50 in) Pallet Fork Carriage
- Height
- 35.9 in
- Width
- 50 in
- Weight
- 207.2 lb
1676 mm (66 in) Industrial Grapple Forks
- Width
- 66 in
- Height - Grapples Closed
- 31.9 in
- Jaw Opening
- 38 in
1829 mm (72 in) Industrial Grapple Forks
- Width
- 72 in
- Height - Grapples Closed
- 32 in
- Jaw Opening
- 38 in
1438 mm (57 in) Heavy Duty Fork Carriage
- Height
- 35.8 in
- Width
- 56.6 in
- Weight
- 319.7 lb
PC310 High Flow XPS Cold Planer
- Working Width
- 39.4 in
- Maximum Cutting Depth
- 5.1 in
- Required Hydraulics
- High Flow XPS
PC305 High Flow Cold Planer
- Working Width
- 17.7 in
- Maximum Cutting Depth
- 6.7 in
- Required Hydraulics
- High Flow
PC306 High Flow Cold Planer
- Working Width
- 23.6 in
- Maximum Cutting Depth
- 6.7 in
- Required Hydraulics
- High Flow
PC306 With Water High Flow Cold Planer
- Working Width
- 23.6 in
- Maximum Cutting Depth
- 6.7 in
- Required Hydraulics
- High Flow
PC104 Standard Flow Cold Planer
- Working Width
- 13.8 in
- Maximum Cutting Depth
- 5.9 in
- Required Hydraulics
- Standard Flow
PC105 Standard Flow Cold Planer
- Working Width
- 17.7 in
- Maximum Cutting Depth
- 5.9 in
- Required Hydraulics
- Standard Flow
1730 mm (68 in) Utility Grapple Bucket
- Width
- 68.1 in
- Height - Grapples Closed
- 29.1 in
- Jaw Opening
- 35.5 in
1883 mm (74 in) Utility Grapple Bucket
- Width
- 74.1 in
- Height - Grapples Closed
- 29.1 in
- Jaw Opening
- 35.5 in
1730 mm (68 in) Utility Bucket With Bolt-On Cutting Edge
- Width
- 68.1 in
- Capacity
- 0.63 yd³
- Weight
- 569 lb
1883 mm (74 in) Utility Bucket With Bolt-On Cutting Edge
- Width
- 74.1 in
- Capacity
- 0.68 yd³
- Weight
- 609 lb
1168 mm (46 in) Stump Bucket
- Working Width
- 11.8 in
- Overall Width
- 46 in
- Weight
- 357.1 lb
1576 mm (62 in) Utility Bucket With Bolt-On Cutting Edge
- Width
- 62 in
- Capacity
- 0.56 yd³
- Weight
- 529 lb
2397 mm (94 in) Rod Tine Style Skeleton Bucket
- Width
- 94.4 in
- Weight
- 859.8 lb
- Height
- 25.4 in
2349 mm (92 in) Plate Tine Style Skeleton Bucket
- Width
- 92.5 in
- Weight
- 842.2 lb
- Height
- 21.4 in
2016 mm (80 in) Rod Tine Style Skeleton Bucket
- Width
- 79.4 in
- Weight
- 740.8 lb
- Height
- 25.4 in
2206 mm (86 in) Rod Tine Style Skeleton Bucket
- Width
- 86.9 in
- Weight
- 800.3 lb
- Height
- 25.4 in
1849 mm (74 in) Plate Tine Style Skeleton Bucket
- Width
- 72.8 in
- Weight
- 698.9 lb
- Height
- 21.4 in
BD118 Side Discharge Bucket With Sawdust Agitator
- Capacity
- 2 yd³
- Width
- 73.2 in
- Required Hydraulics
- Standard Flow
BD121 Side Discharge Bucket With Sawdust Agitator
- Capacity
- 2.3 yd³
- Width
- 85.2 in
- Required Hydraulics
- Standard Flow
BD121 Side Discharge Bucket With Sand Agitator
- Capacity
- 1.3 yd³
- Width
- 85.2 in
- Required Hydraulics
- Standard Flow
2188 mm (86 in) Multi-Purpose Bucket With Bolt-On Teeth And Spill Guard
- Width
- 86.1 in
- Capacity
- 0.56 yd³
- Weight
- 1018.5 lb
BD118 Side Discharge Bucket With Sand Agitator
- Capacity
- 1 yd³
- Width
- 73.2 in
- Required Hydraulics
- Standard Flow
2188 mm (86 in) Multi-Purpose Bucket With Bolt-On Cutting Edge And Spill Guard
- Width
- 86.1 in
- Capacity
- 0.56 yd³
- Weight
- 1071 lb
2036 mm (80 in) Multi-Purpose Bucket With Bolt-On Teeth And Spill Guard
- Width
- 80.2 in
- Capacity
- 0.52 yd³
- Weight
- 970 lb
2036 mm (80 in) Multi-Purpose Bucket With Bolt-On Cutting Edge And Spill Guard
- Width
- 80.2 in
- Capacity
- 0.52 yd³
- Weight
- 1016 lb
1883 mm (74 in) Multi-Purpose Bucket With Bolt-On Teeth And Spill Guard
- Width
- 74.1 in
- Capacity
- 0.48 yd³
- Weight
- 917.1 lb
1730 mm (68 in) Multi-Purpose Bucket With Bolt-On Teeth And Spill Guard
- Width
- 68.1 in
- Capacity
- 0.44 yd³
- Weight
- 868.6 lb
1883 mm (74 in) Multi-Purpose Bucket With Bolt-On Cutting Edge And Spill Guard
- Width
- 74.1 in
- Capacity
- 0.48 yd³
- Weight
- 961 lb
1576 mm (62 in) Multi-Purpose Bucket With Bolt-On Teeth And Spill Guard
- Width
- 62 in
- Capacity
- 0.39 yd³
- Weight
- 817.9 lb
1730 mm (68 in) Multi-Purpose Bucket With Bolt-On Cutting Edge And Spill Guard
- Width
- 68.1 in
- Capacity
- 0.44 yd³
- Weight
- 906 lb
MB250 Mixing Bucket
- Capacity
- 0.33 yd³
- Width
- 54.7 in
- Required Hydraulics
- Standard Flow
1576 mm (62 in) Multi-Purpose Bucket With Bolt-On Cutting Edge And Spill Guard
- Width
- 62 in
- Capacity
- 0.39 yd³
- Weight
- 851 lb
MB200 Mixing Bucket
- Capacity
- 0.26 yd³
- Width
- 54.6 in
- Required Hydraulics
- Standard Flow
2642 mm (104 in) Material Handling Bucket With Bolt-On Cutting Edge
- Width
- 104 in
- Capacity
- 1.74 yd³
- Weight
- 922 lb
2185 mm (86 in) Material Handling Bucket With Bolt-On Cutting Edge
- Width
- 86 in
- Capacity
- 1.4 yd³
- Weight
- 805 lb
2490 mm (98 in) Material Handling Bucket With Bolt-On Cutting Edge
- Width
- 98 in
- Capacity
- 1.63 yd³
- Weight
- 882 lb
1883 mm (74 in) Low Profile Bucket With Bolt-On Cutting Edge
- Width
- 74 in
- Capacity
- 0.54 yd³
- Weight
- 547 lb
2036 mm (80 in) Low Profile Bucket With Bolt-On Cutting Edge
- Width
- 80 in
- Capacity
- 0.58 yd³
- Weight
- 584 lb
1421 mm (56 in) Low Profile Bucket With Bolt-On Cutting Edge
- Width
- 56 in
- Capacity
- 0.39 yd³
- Weight
- 392 lb
1576 mm (62 in) Low Profile Bucket With Bolt-On Cutting Edge
- Width
- 62 in
- Capacity
- 0.44 yd³
- Weight
- 452 lb
1730 mm (68 in) Low Profile Bucket With Bolt-On Cutting Edge
- Width
- 68 in
- Capacity
- 0.48 yd³
- Weight
- 512 lb
2185 mm (86 in) Light Material Bucket With Bolt-On Cutting Edge
- Width
- 86 in
- Capacity
- 1.1 yd³
- Weight
- 747 lb
2490 mm (98 in) Light Material Bucket With Bolt-On Cutting Edge
- Width
- 98 in
- Capacity
- 1.22 yd³
- Weight
- 822 lb
1883 mm (74 in) Light Material Bucket With Bolt-On Cutting Edge
- Width
- 74.1 in
- Capacity
- 0.9 yd³
- Weight
- 666 lb
2036 mm (80 in) Light Material Bucket With Bolt-On Cutting Edge
- Width
- 80.2 in
- Capacity
- 0.98 yd³
- Weight
- 706 lb
2188 mm (86 in) Industrial Performance Bucket With Bolt-On Teeth
- Width
- 86.1 in
- Capacity
- 0.88 yd³
- Weight
- 762.8 lb
2340 mm (92 in) Industrial Performance Bucket With Bolt-On Cutting Edge
- Width
- 92.1 in
- Capacity
- 0.94 yd³
- Weight
- 855.4 lb
2340 mm (92 in) Industrial Performance Bucket With Bolt-On Teeth
- Width
- 92.1 in
- Capacity
- 0.94 yd³
- Weight
- 795.9 lb
2036 mm (80 in) Industrial Performance Bucket With Bolt-On Teeth
- Width
- 80.2 in
- Capacity
- 0.81 yd³
- Weight
- 729.7 lb
2188 mm (86 in) Industrial Performance Bucket With Bolt-On Cutting Edge
- Width
- 86.1 in
- Capacity
- 0.88 yd³
- Weight
- 815.7 lb
1883 mm (74 in) Industrial Performance Bucket With Bolt-On Teeth
- Width
- 74.1 in
- Capacity
- 0.75 yd³
- Weight
- 694.5 lb
2036 mm (80 in) Industrial Performance Bucket With Bolt-On Cutting Edge
- Width
- 80.2 in
- Capacity
- 0.81 yd³
- Weight
- 778.2 lb
1730 mm (68 in) Industrial Performance Bucket With Bolt-On Teeth
- Width
- 68.1 in
- Capacity
- 0.68 yd³
- Weight
- 663.6 lb
1883 mm (74 in) Industrial Performance Bucket With Bolt-On Cutting Edge
- Width
- 74.1 in
- Capacity
- 0.75 yd³
- Weight
- 740.8 lb
1730 mm (68 in) Industrial Performance Bucket With Bolt-On Cutting Edge
- Width
- 68.1 in
- Capacity
- 0.68 yd³
- Weight
- 701.1 lb
2036 mm (80 in) Industrial Grapple Bucket With Bolt-On Cutting Edge
- Width
- 80.2 in
- Weight
- 1201.5 lb
- Height - Grapples Closed
- 20.7 in
1576 mm (62 in) Industrial Grapple Bucket With Bolt-On Cutting Edge
- Width
- 62 in
- Weight
- 1062.6 lb
- Height - Grapples Closed
- 20.7 in
1730 mm (68 in) Industrial Grapple Bucket With Bolt-On Cutting Edge
- Width
- 68.1 in
- Weight
- 1111.1 lb
- Height - Grapples Closed
- 20.7 in
1883 mm (74 in) Industrial Grapple Bucket With Bolt-On Cutting Edge
- Width
- 74.1 in
- Weight
- 1159.6 lb
- Height - Grapples Closed
- 20.7 in
2188 mm (86 in) General Purpose Bucket With Bolt-On Cutting Edge
- Width
- 86.1 in
- Capacity
- 0.82 yd³
- Weight
- 723.1 lb
2188 mm (86 in) General Purpose Bucket With Bolt-On Teeth
- Width
- 86.1 in
- Capacity
- 0.82 yd³
- Weight
- 670.2 lb
2036 mm (80 in) General Purpose Bucket With Bolt-On Cutting Edge
- Width
- 80.2 in
- Capacity
- 0.63 yd³
- Weight
- 630.5 lb
2036 mm (80 in) General Purpose Bucket With Bolt-On Teeth
- Width
- 80.2 in
- Capacity
- 0.63 yd³
- Weight
- 582 lb
1883 mm (74 in) General Purpose Bucket With Bolt-On Cutting Edge
- Width
- 74.1 in
- Capacity
- 0.58 yd³
- Weight
- 597.5 lb
1883 mm (74 in) General Purpose Bucket With Bolt-On Teeth
- Width
- 74.1 in
- Capacity
- 0.58 yd³
- Weight
- 549 lb
1730 mm (68 in) General Purpose Bucket With Bolt-On Cutting Edge
- Width
- 68.1 in
- Capacity
- 0.52 yd³
- Weight
- 551.2 lb
1730 mm (68 in) General Purpose Bucket With Bolt-On Teeth
- Width
- 68.1 in
- Capacity
- 0.52 yd³
- Weight
- 509.3 lb
1576 mm (62 in) General Purpose Bucket With Bolt-On Cutting Edge
- Width
- 62 in
- Capacity
- 0.47 yd³
- Weight
- 440.9 lb
1576 mm (62 in) General Purpose Bucket With Bolt-On Teeth
- Width
- 62 in
- Capacity
- 0.47 yd³
- Weight
- 407.9 lb
1150 mm (45 in) Concrete Slab Bucket
- Width
- 23.9 in
- Maximum Slab Thickness
- 8 in
- Overall Width
- 45.3 in
BR120 Brushcutter
- Overall Width
- 79.7 in
- Cutting Width
- 78 in
- Maximum Cutting Diameter
- 3 in
BR318 Brushcutter
- Overall Width
- 74 in
- Cutting Width
- 72 in
- Maximum Cutting Diameter
- 3 in
BR320 Brushcutter
- Overall Width
- 79.7 in
- Cutting Width
- 78 in
- Maximum Cutting Diameter
- 3 in
BR117 Brushcutter
- Overall Width
- 68 in
- Cutting Width
- 66 in
- Maximum Cutting Diameter
- 3 in
BR118 Brushcutter
- Overall Width
- 74 in
- Cutting Width
- 72 in
- Maximum Cutting Diameter
- 3 in
BU118 Utility Broom with Polypropylene Bristles
- Overall Width
- 83.3 in
- Sweeping Width
- 70.9 in
- Brush Diameter
- 26.2 in
BU118 Utility Broom
- Overall Width
- 83.3 in
- Sweeping Width
- 73.4 in
- Brush Diameter
- 26 in
BU115 Utility Broom with Polypropylene Bristles
- Overall Width
- 71.3 in
- Sweeping Width
- 59.1 in
- Brush Diameter
- 26.2 in
BU115 Utility Broom
- Overall Width
- 71.3 in
- Sweeping Width
- 59.4 in
- Brush Diameter
- 26 in
BP115C Pickup Broom
- Overall Width
- 78.3 in
- Sweeping Width
- 60 in
- Brush Diameter
- 26 in
BP118C Pickup Broom
- Overall Width
- 90.4 in
- Sweeping Width
- 72 in
- Brush Diameter
- 26 in
BA118C Manual Angle Broom
- Overall Width
- 104 in
- Sweeping Width
- 83 in
- Brush Diameter
- 32 in
BA118C Hydraulic Angle Broom
- Overall Width
- 104 in
- Sweeping Width
- 83 in
- Brush Diameter
- 32 in
GB120 Grader Blade
- Overall Width
- 78.4 in
- Blade Width
- 78 in
- Width - Fully Angled
- 68.8 in
GB120 Grader Blade with Wings and Smart Technology
- Overall Width
- 84.6 in
- Blade Width
- 78 in
- Width - Fully Angled
- 90.2 in
GB124 Grader Blade
- Overall Width
- 96.4 in
- Blade Width
- 96 in
- Width - Fully Angled
- 84.4 in
GB124 Grader Blade with Wings and Smart Technology
- Overall Width
- 102.6 in
- Blade Width
- 96 in
- Width - Fully Angled
- 105.8 in
2337 mm (92 in) Dozer Blade
- Blade Width
- 92 in
- Width - Fully Angled
- 80.7 in
- Maximum Blade Angle - Right/Left of Center
- 30 degrees
2007 mm (79 in) Dozer Blade
- Blade Width
- 79 in
- Width - Fully Angled
- 68.9 in
- Maximum Blade Angle - Right/Left of Center
- 30 degrees
BB124 Box Blade
- Overall Width
- 99.4 in
- Working Width
- 95.9 in
- Optimal Hydraulic Flow
- 30-85 L/min (8-22 gpm)
BB121 Box Blade
- Overall Width
- 87.4 in
- Working Width
- 83.9 in
- Optimal Hydraulic Flow
- 30-85 L/min (8-22 gpm)
1829 mm (72 in) Angle Blade
- Blade Width
- 72 in
- Width - Fully Angled
- 66.3 in
- Maximum Blade Angle - Right/Left of Center
- 30 degrees
2134 mm (84 in) Angle Blade
- Blade Width
- 84 in
- Width - Fully Angled
- 76.7 in
- Maximum Blade Angle - Right/Left of Center
- 30 degrees
1140 mm (45 in) Dual Tine Bale Spear
- Overall Width
- 55.4 in
- Overall Height
- 51.8 in
- Capacity
- 3007.1 lb
890 mm (35 in) Dual Tine Bale Spear
- Overall Width
- 55.4 in
- Overall Height
- 51.8 in
- Capacity
- 3007.1 lb
1140 mm (45 in) Single Tine Bale Spear
- Overall Width
- 50.6 in
- Overall Height
- 22.4 in
- Capacity
- 2004 lb
1803 mm (71 in) Bale Grab
- Overall Width
- 55.2 in
- Overall Height
- 34.4 in
- Maximum Opening Width
- 71 in
2133 mm (84 in) Bale Grab
- Overall Width
- 55.2 in
- Overall Height
- 34.4 in
- Maximum Opening Width
- 84 in
890 mm (35 in) Single Tine Bale Spear
- Overall Width
- 50.6 in
- Overall Height
- 22.4 in
- Capacity
- 2004 lb
BH130 Backhoe with Smart Technology
- Maximum Digging Depth
- 117 in
- Operating Weight
- 2325.9 lb
- Overall Length
- 87 in
A68 Auger
- Drive Shaft Torque at Maximum Pressure
- 5034.6 lb/ft
- Drive Method
- Gerotor Motor - Double Planetary Drive
- Mounting Bracket Design
- Skid Steer Loader Coupler
A41 Auger
- Drive Shaft Torque at Maximum Pressure
- 3037.3 lb/ft
- Drive Method
- Gerotor Motor - Single Planetary Reduction
- Mounting Bracket Design
- Skid Steer Loader Coupler
A23 Auger
- Drive Shaft Torque at Maximum Pressure
- 1699.3 lb/ft
- Drive Method
- Gerotor Motor - Direct Drive
- Mounting Bracket Design
- Skid Steer Loader Coupler
SG16 Stump Grinder
- Required Hydraulics
- Standard Flow
- Cutting Wheel Diameter - With Teeth
- 21.5 in
- Cutting Depth - Below Ground
- 20.5 in
SG36 Stump Grinder
- Required Hydraulics
- High Flow XPS
- Cutting Wheel Diameter - With Teeth
- 21.5 in
- Cutting Depth - Below Ground
- 20.5 in
3.66 m (12 ft) Straight Snow Push with rubber cutting edge
- Working Width
- 144 in
- Weight
- 952.4 lb
- Length
- 43.7 in
3.66 m (12 ft) Straight Snow Push with steel trip edge
- Working Width
- 144 in
- Weight
- 1402.1 lb
- Length
- 45 in
3.05 m (10 ft) Straight Snow Push with rubber cutting edge
- Working Width
- 120 in
- Weight
- 866.4 lb
- Length
- 43.7 in
3.66 m (12 ft) Straight Snow Push with rubber trip edge
- Working Width
- 144 in
- Weight
- 1347 lb
- Length
- 45 in
3.05 m (10 ft) Straight Snow Push with steel trip edge
- Working Width
- 120 in
- Weight
- 1201.5 lb
- Length
- 45 in
3.05 m (10 ft) Straight Snow Push with rubber trip edge
- Working Width
- 120 in
- Weight
- 1153 lb
- Length
- 45 in
2.44 m (8 ft) Straight Snow Push with rubber cutting edge
- Working Width
- 96 in
- Weight
- 778.2 lb
- Length
- 43.7 in
2.44 m (8 ft) Straight Snow Push with steel trip edge
- Working Width
- 96 in
- Weight
- 1082.5 lb
- Length
- 45 in
2.44 m (8 ft) Straight Snow Push with rubber trip edge
- Working Width
- 96 in
- Weight
- 1036.2 lb
- Length
- 45 in
2.4 m (8 ft) Snow Wing
- Working Width (Wings Closed)
- 96.5 in
- Overall Width (Wings Closed)
- 104.2 in
- Overall Width (Wings Open)
- 161.7 in
2.8 m (9 ft) Snow Wing
- Working Width (Wings Closed)
- 108.5 in
- Overall Width (Wings Closed)
- 116.2 in
- Overall Width (Wings Open)
- 173.7 in
3.0 m (10 ft) Snow Plow
- Width
- 119.9 in
- Angled Width
- 98.3 in
- Weight
- 1217 lb
2.7 m (9 ft) Snow Plow
- Width
- 108 in
- Angled Width
- 88.5 in
- Weight
- 1161.8 lb
1.8 m (6 ft) Snow Plow
- Width
- 71.9 in
- Angled Width
- 59 in
- Weight
- 992.1 lb
2.1 m (7 ft) Snow Plow
- Width
- 84 in
- Angled Width
- 68.8 in
- Weight
- 1051.6 lb
2.4 m (8 ft) Snow Plow
- Width
- 95.9 in
- Angled Width
- 78.6 in
- Weight
- 1106.7 lb
SR321 Snow Blower
- Intake Width
- 76.5 in
- Overall Width
- 85.9 in
- Weight
- 1016.3 lb
SR121 Snow Blower
- Intake Width
- 76.5 in
- Overall Width
- 85.9 in
- Weight
- 974.4 lb
SR318 Snow Blower
- Intake Width
- 63.5 in
- Overall Width
- 73.9 in
- Weight
- 996.5 lb
2134 mm (84 in) Multi V-Plow
- Straight Width
- 84 in
- Angled Width
- 73 in
- Interface Type
- Skid Steer Coupler
SR318 Snow Blower
- Intake Width
- 50.8 in
- Overall Width
- 61.9 in
- Weight
- 934.8 lb
SR118 Snow Blower
- Intake Width
- 63.5 in
- Overall Width
- 73.9 in
- Weight
- 954.6 lb
1524 mm (60 in) Multi V-Plow
- Straight Width
- 60 in
- Angled Width
- 53 in
- Interface Type
- Skid Steer Coupler
S308 Mobile Scrap & Demolition Shear
- Tip Force
- 43.3 Sh Ton
- Rotation
- 360 Degrees
- Jaw Opening
- 9.4 in
SW360, 200 mm (8 in) Wheel Saw
- Maximum Cutting Depth
- 23.6 in
- Wheel Width
- 7.9 in
- Weight
- 2921.1 lb
SW360, 130 mm (5 in) Wheel Saw
- Maximum Cutting Depth
- 23.6 in
- Wheel Width
- 5.1 in
- Weight
- 3009.3 lb
SW360, 100 mm (4 in) Wheel Saw
- Maximum Cutting Depth
- 23.6 in
- Wheel Width
- 3.9 in
- Weight
- 2943.2 lb
SW360, 160 mm (6 in) Wheel Saw
- Maximum Cutting Depth
- 23.6 in
- Wheel Width
- 6.3 in
- Weight
- 2899.1 lb
SW345, 80 mm (3 in) Wheel Saw
- Maximum Cutting Depth
- 17.7 in
- Wheel Width
- 3.1 in
- Weight
- 2482.4 lb
SW345, 130 mm (5 in) Wheel Saw
- Maximum Cutting Depth
- 17.7 in
- Wheel Width
- 5.1 in
- Weight
- 2239.9 lb
T315 High Flow Trencher with standard teeth
- Standard Boom Length
- 60 in
- Cutting Width
- 8 in
- Chain Type
- Standard
T315 High Flow Trencher with combo teeth
- Standard Boom Length
- 60 in
- Cutting Width
- 6 in
- Chain Type
- Standard
T315 High Flow Trencher with no chain
- Standard Boom Length
- 60 in
- Required Hydraulics
- High Flow XPS
- Overall Width
- 74.8 in
T112 Manual Trencher with standard teeth
- Standard Boom Length
- 48 in
- Cutting Width
- 6 in
- Chain Type
- Standard
T112 Manual Trencher with rockfrost teeth
- Standard Boom Length
- 48 in
- Cutting Width
- 6 in
- Chain Type
- Rockfrost
T315 High Flow Trencher with standard teeth
- Standard Boom Length
- 60 in
- Cutting Width
- 6 in
- Chain Type
- Standard
T112 Hydraulic Trencher with standard teeth
- Standard Boom Length
- 48 in
- Cutting Width
- 6 in
- Chain Type
- Standard
T112 Manual Trencher with combo teeth
- Standard Boom Length
- 48 in
- Cutting Width
- 6 in
- Chain Type
- Combo
T112 Manual Trencher with no chain
- Standard Boom Length
- 48 in
- Required Hydraulics
- Standard Flow
- Overall Width
- 74.8 in
T112 Hydraulic Trencher with rockfrost teeth
- Standard Boom Length
- 48 in
- Cutting Width
- 6 in
- Chain Type
- Rockfrost
T112 Hydraulic Trencher with combo teeth
- Standard Boom Length
- 48 in
- Cutting Width
- 6 in
- Chain Type
- Combo
T112 Hydraulic Trencher with no chain
- Standard Boom Length
- 48 in
- Required Hydraulics
- Standard Flow
- Overall Width
- 74.8 in
T109 Manual Trencher with standard teeth
- Standard Boom Length
- 36 in
- Cutting Width
- 8 in
- Chain Type
- Standard
T112 Hydraulic Trencher with standard teeth
- Standard Boom Length
- 48 in
- Cutting Width
- 8 in
- Chain Type
- Standard
T109 Manual Trencher with no chain
- Standard Boom Length
- 36 in
- Required Hydraulics
- Standard Flow
- Overall Width
- 56.1 in
T109 Manual Trencher with terminator teeth
- Standard Boom Length
- 36 in
- Cutting Width
- 6 in
- Chain Type
- Terminator
T109 Manual Trencher with rockfrost teeth
- Standard Boom Length
- 36 in
- Cutting Width
- 6 in
- Chain Type
- Rockfrost
T109 Manual Trencher with standard teeth
- Standard Boom Length
- 36 in
- Cutting Width
- 6 in
- Chain Type
- Standard
T109 Hydraulic Trencher with standard teeth
- Standard Boom Length
- 36 in
- Cutting Width
- 6 in
- Chain Type
- Standard
T109 Manual Trencher with combo teeth
- Standard Boom Length
- 36 in
- Cutting Width
- 6 in
- Chain Type
- Combo
T109 Hydraulic Trencher with no chain
- Standard Boom Length
- 36 in
- Required Hydraulics
- Standard Flow
- Overall Width
- 56.1 in
T109 Hydraulic Trencher with combo teeth
- Standard Boom Length
- 36 in
- Cutting Width
- 6 in
- Chain Type
- Combo
T109 Hydraulic Trencher with rockfrost teeth
- Standard Boom Length
- 36 in
- Cutting Width
- 6 in
- Chain Type
- Rockfrost
T109 Hydraulic Trencher with standard teeth
- Standard Boom Length
- 36 in
- Cutting Width
- 8 in
- Chain Type
- Standard
T109 Hydraulic Trencher with terminator teeth
- Standard Boom Length
- 36 in
- Cutting Width
- 6 in
- Chain Type
- Terminator
LT114 Landscape Tiller
- Working Width
- 53.3 in
- Working Depth
- 25-152 mm (1-6 in)
- Weight
- 925.9 lb
LT118 Landscape Tiller
- Working Width
- 72.8 in
- Working Depth
- 25-152 mm (1-6 in)
- Weight
- 925.9 lb
1576 mm (62 in) General Purpose Bucket
- Width
- 62 in
- Capacity
- 0.47 yd³
- Weight
- 374.8 lb
1730 mm (68 in) Utility Bucket
- Width
- 68.1 in
- Capacity
- 0.63 yd³
- Weight
- 496 lb
1883 mm (74 in) Utility Bucket
- Width
- 74.1 in
- Capacity
- 0.68 yd³
- Weight
- 526.9 lb
1576 mm (62 in) Utility Bucket
- Width
- 62 in
- Capacity
- 0.56 yd³
- Weight
- 463 lb
1883 mm (74 in) Light Material Bucket
- Width
- 74.1 in
- Capacity
- 0.9 yd³
- Weight
- 586.4 lb
2036 mm (80 in) Light Material Bucket
- Width
- 80.2 in
- Capacity
- 0.98 yd³
- Weight
- 619.5 lb
1730 mm (68 in) Industrial Grapple Bucket
- Width
- 68.1 in
- Weight
- 1038.4 lb
- Height - Grapples Closed
- 20.7 in
1883 mm (74 in) Industrial Grapple Bucket
- Width
- 74.1 in
- Weight
- 1080.3 lb
- Height - Grapples Closed
- 20.7 in
2035 mm (80 in) Industrial Grapple Bucket
- Width
- 80.2 in
- Weight
- 1115.5 lb
- Height - Grapples Closed
- 20.7 in
2188 mm (86 in) General Purpose Bucket
- Width
- 86.1 in
- Capacity
- 0.82 yd³
- Weight
- 634.9 lb
1576 mm (62 in) Industrial Grapple Bucket
- Width
- 62 in
- Weight
- 996.5 lb
- Height - Grapples Closed
- 20.7 in
1730 mm (68 in) General Purpose Bucket
- Width
- 68.1 in
- Capacity
- 0.52 yd³
- Weight
- 476.2 lb
1883 mm (74 in) General Purpose Bucket
- Width
- 74.1 in
- Capacity
- 0.58 yd³
- Weight
- 515.9 lb
2036 mm (80 in) General Purpose Bucket
- Width
- 80.2 in
- Capacity
- 0.63 yd³
- Weight
- 544.5 lb