226D3 Skid Steer Loader
The Cat® 226D3 Skid Steer Loader, with its radial lift design, delivers impressive mid-lift reach and excellent digging performance with outstanding drawbar power.
|
|
|
|
Engine
- Gross Power - SAE J1995
- 67.1HP
- Net Power - SAE 1349
- 65.8HP
- Displacement
- 134.3in³
- Stroke
- 3.9in
- Bore
- 3.3in
- Engine Model
- Cat C2.2 CRDI
- Peak Torque - 1,500 rpm - SAE J1995
- 153ft·lbf
- Net Power - ISO 9249
- 66.5HP
Operating Specifications
- Rated Operating Capacity
- 1550lb
- Rated Operating Capacity with Optional Counterweight
- 1650lb
- Tipping Load
- 3100lb
- Breakout Force - Tilt Cylinder
- 3927lb
- Note
- * Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1576 mm (62 in) low profile bucket, Cat 10 × 16.5 tires, standard flow hydraulics, C1 cab (OROPS, mechanical seat), 850 CCA battery
Weights
- Operating Weight
- 5849lb
- Note
- * Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1576 mm (62 in) low profile bucket, Cat 10 × 16.5 tires, standard flow hydraulics, C1 cab (OROPS, mechanical seat), 850 CCA battery
Dimensions
- Wheel Base
- 41.5in
- Length - With Bucket on Ground
- 127.3in
- Length - Without Bucket
- 99.4in
- Height - Top of Cab
- 79.8in
- Vehicle Width over Tires
- 58.9in
- Maximum Overall Height
- 143.8in
- Bucket Pin Height - Maximum Lift
- 110.9in
- Bucket Pin Height - Carry Position
- 8.5in
- Reach - Maximum Lift/Dump
- 21in
- Clearance at Maximum Lift and Dump
- 81.8in
- Ground Clearance
- 6.9in
- Departure Angle
- 27.9°
- Maximum Dump Angle
- 46.7°
- Rack Back Angle - Maximum Height
- 88.9°
- Bumper Overhang - Behind Rear Axle
- 35.2in
- Turning Radius from Center - Bucket
- 77.8in
- Maximum Reach - With Arms Parallel to Ground
- 50.7in
- Turning Radius from Center - Machine Rear
- 59.6in
- Turning Radius from Center - Coupler
- 43.5in
- Note
- * Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1576 mm (62 in) low profile bucket, Cat 10 × 16.5 tires, standard flow hydraulics, C1 cab (OROPS, mechanical seat), 850 CCA battery
Cab
- ROPS
- ISO 3471:2008
- FOPS
- ISO 3449:2005 Level I
Service Refill Capacities
- Chain Box - Each Side
- 1.8gal (US)
- Cooling System
- 3.2gal (US)
- Engine Crankcase
- 2.6gal (US)
- Fuel Tank
- 15.1gal (US)
- Hydraulic System
- 11.9gal (US)
- Hydraulic Tank
- 9gal (US)
Hydraulic System
- Hydraulic Flow - Standard - Loader Hydraulic Pressure
- 3336psi
- Hydraulic Flow - High Flow - Maximum Loader Hydraulic Pressure
- 3336psi
- Hydraulic Flow - Standard - Hydraulic Power (Calculated)
- 33.5HP
- Hydraulic Flow - High Flow - Hydraulic Power (Calculated)
- 50.9HP
- Hydraulic Flow - Standard - Loader Hydraulic Flow
- 18gal/min
- Hydraulic Flow - High Flow - Maximum Loader Hydraulic Flow
- 26gal/min
Power Train
- Travel Speed - Forward or Reverse - One Speed
- 7.6mile/h
- Travel Speed - Forward or Reverse - Two Speed Option
- 11.1mile/h
Air Conditioning System (if equipped)
- Air Conditioning
- The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes.
Noise Level
- Outside Cab***
- 102dB(A)
- Inside Cab**
- 83dB(A)
- Note (3)
- ***The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.
- Note (1)
- Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
- Note (2)
- **The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan spe
Standard Equipment:
-
- Electrical
-
- 12 volt Electrical System
- 80 ampere Alternator
- Ignition Key Start/Stop Switch
- Lights: Gauge Backlighting, Two Rear Tail Lights, Two Adjustable Front and Rear Halogen Lights, Dome Light
- Backup Alarm
- Heavy Duty Battery, 850 CCA
-
- Operator Environment
-
- Gauges: Fuel Level, Hour Meter
- Operator Warning System Indicators: Air Filter Restriction, Alternator Output, Armrest Raised/Operator Out of Seat, Engine Coolant Temperature, Engine Oil Pressure, Glow Plug Activation, Hydraulic Filter Restriction, Hydraulic Oil Temperature, Parking Brake Engaged
- Fold In Ergonomic Contoured Armrest
- Control Interlock System, when operator leaves seat or armrest raised: Hydraulic System Disables, Hydrostatic Transmission Disables, Parking Brake Engages
- ROPS Cab, Open, Tilt Up
- FOPS, Level I
- Top and Rear Windows
- Floor Mat
- Interior Rearview Mirror
- 12 volt Electric Socket
- Horn
- Hand (Dial) Throttle, Electronic
- Adjustable Joystick Controls
- Anti-theft Security System with 6-button Keypad
- Storage Compartment with Netting
-
- Power Train
-
- Cat C2.2, Turbo Diesel Engine, Meeting Tier 4 Final and Stage V emission standards
- Air Cleaner, Dual Element, Radial Seal
- S·O·SSM Sampling Valve, Hydraulic Oil
- Filters, Cartridge-type, Hydraulic
- Filters, Canister-type, Fuel and Water Separator
- ATAAC/Radiator/Hydraulic Oil Cooler (side-by-side)
- Spring Applied, Hydraulically Released Parking Brakes
- Hydrostatic Transmission
- Four Wheel Chain Drive
-
- Other
-
- Engine Enclosure, Lockable
- Extended Life Antifreeze, –36° C (–33° F)
- Machine Tie Down Points (6)
- Support, Lift Arm
- Hydraulic Oil Level Sight Gauge
- Radiator Coolant Level Sight Gauge
- Radiator, Expansion Bottle
- Cat ToughGuard™ Hose
- Auxiliary, Hydraulics, Continuous Flow
- Heavy Duty, Flat Faced Quick Disconnects with Integrated Pressure Release
- Split D-Ring to Route Work Tool Hoses Along Side of Left Lift Arm
- Electrical Outlet, Beacon
- Belly Pan Cleanout
- Variable Speed Demand Fan
- Product Link™ PL240, Cellular
-
- Mandatory Equipment
-
- Hydraulics, Standard or High Flow
- Quick Coupler, Mechanical or Powered
- Highly Visible Seat Belt, 50 mm (2 in) or 75 mm (3 in)
- EU Preparation Package (Europe only)
- Power Train: One Speed, One Speed with Ride Control, Two Speed
- Tires, 10 × 16.5
- PERFORMANCE PACKAGES:
– Performance Package H1: Standard Flow Hydraulics (No Self Level)
– Performance Package H2: Standard Flow Hydraulics, Dual Direction Electronic Self Level (Raise and Lower), Work Tool Return to Dig, Work Tool Positioner, and Electronic Snubbing (Raise and Lower)
– Performance Package H3: High Flow Hydraulics, Dual Direction Electronic Self Level (Raise and Lower), Work Tool Return to Dig, Work Tool Positioner, and Electronic Snubbing (Raise and Lower) - COMFORT PACKAGES:
– Open ROPS (C1): Foot Throttle, Headliner, Cup Holder, and choice of Seat (High Back, Heated, Air Ride Seat) (No Heater or Door)
– Enclosed ROPS with A/C (C3): Foot Throttle, Headliner, Heater and Defroster, Air Conditioner, Side Windows, Cup Holder, Radio Ready, choice of Seat (Mechanical Suspension or High Back, Heated, Air Ride Seat) and Door (Glass or Polycarbonate)
Optional Equipment:
-
- Optional Equipment
-
- Hand-Foot Style Controls
- External Counterweights
- Beacon, Rotating
- Engine Block Heater – 120V
- Oil, Hydraulic, Cold Operation
- Product Link PL641, Cellular
- Advanced Display with Rearview Camera: Full Color, 127 mm (5 in) LCD screen, Advanced Multi-operator Security System, On-screen Adjustments for Implement Response, Hystat Response, and Creep Control; Standard Equipment in Europe Only
- Bluetooth® Radio with Microphone (AM/FM/Weather Band Receiver with USB and Auxiliary Input Jack)
T315 High Flow Trencher with combo teeth
- Standard Boom Length
- 60 in
- Cutting Width
- 6 in
- Chain Type
- Standard
T315 High Flow Trencher with standard teeth
- Standard Boom Length
- 60 in
- Cutting Width
- 8 in
- Chain Type
- Standard
T315 High Flow Trencher with standard teeth
- Standard Boom Length
- 60 in
- Cutting Width
- 6 in
- Chain Type
- Standard
T112 Manual Trencher with rockfrost teeth
- Standard Boom Length
- 48 in
- Cutting Width
- 6 in
- Chain Type
- Rockfrost
T112 Manual Trencher with standard teeth
- Standard Boom Length
- 48 in
- Cutting Width
- 6 in
- Chain Type
- Standard
T112 Manual Trencher with combo teeth
- Standard Boom Length
- 48 in
- Cutting Width
- 6 in
- Chain Type
- Combo
T112 Hydraulic Trencher with standard teeth
- Standard Boom Length
- 48 in
- Cutting Width
- 6 in
- Chain Type
- Standard
T112 Hydraulic Trencher with combo teeth
- Standard Boom Length
- 48 in
- Cutting Width
- 6 in
- Chain Type
- Combo
T112 Hydraulic Trencher with rockfrost teeth
- Standard Boom Length
- 48 in
- Cutting Width
- 6 in
- Chain Type
- Rockfrost
T112 Hydraulic Trencher with standard teeth
- Standard Boom Length
- 48 in
- Cutting Width
- 8 in
- Chain Type
- Standard
T109 Manual Trencher with standard teeth
- Standard Boom Length
- 36 in
- Cutting Width
- 8 in
- Chain Type
- Standard
T109 Manual Trencher with standard teeth
- Standard Boom Length
- 36 in
- Cutting Width
- 6 in
- Chain Type
- Standard
T109 Manual Trencher with rockfrost teeth
- Standard Boom Length
- 36 in
- Cutting Width
- 6 in
- Chain Type
- Rockfrost
T109 Manual Trencher with terminator teeth
- Standard Boom Length
- 36 in
- Cutting Width
- 6 in
- Chain Type
- Terminator
T109 Manual Trencher with combo teeth
- Standard Boom Length
- 36 in
- Cutting Width
- 6 in
- Chain Type
- Combo
T109 Hydraulic Trencher with standard teeth
- Standard Boom Length
- 36 in
- Cutting Width
- 6 in
- Chain Type
- Standard
T109 Hydraulic Trencher with standard teeth
- Standard Boom Length
- 36 in
- Cutting Width
- 8 in
- Chain Type
- Standard
T109 Hydraulic Trencher with rockfrost teeth
- Standard Boom Length
- 36 in
- Cutting Width
- 6 in
- Chain Type
- Rockfrost
T109 Hydraulic Trencher with terminator teeth
- Standard Boom Length
- 36 in
- Cutting Width
- 6 in
- Chain Type
- Terminator
T109 Hydraulic Trencher with combo teeth
- Standard Boom Length
- 36 in
- Cutting Width
- 6 in
- Chain Type
- Combo
3.66 m (12 ft) Straight Snow Push with rubber cutting edge
- Working Width
- 144 in
- Weight
- 952.4 lb
- Length
- 43.7 in
3.05 m (10 ft) Straight Snow Push with rubber cutting edge
- Working Width
- 120 in
- Weight
- 866.4 lb
- Length
- 43.7 in
2.44 m (8 ft) Straight Snow Push with rubber cutting edge
- Working Width
- 96 in
- Weight
- 778.2 lb
- Length
- 43.7 in
DFS124 Silage Defacer
- Overall Width
- 96.5 in
- Weight
- 1108.9 lb
- Required Hydraulics
- Standard Flow
DFS121 Silage Defacer
- Overall Width
- 84.5 in
- Weight
- 1051.6 lb
- Required Hydraulics
- Standard Flow
DFS118 Silage Defacer
- Overall Width
- 72.5 in
- Weight
- 937 lb
- Required Hydraulics
- Standard Flow
HM418 High Flow XHP Hydraulics Mulcher
- Overall Width
- 83.5 in
- Working Width
- 67.2 in
- Length
- 53.3 in
HM316 High Flow XPS Hydraulics Mulcher
- Overall Width
- 74.1 in
- Working Width
- 62.3 in
- Length
- 53.3 in
HM416 High Flow XHP Hydraulics Mulcher
- Overall Width
- 74.1 in
- Working Width
- 58.6 in
- Length
- 53.3 in
HM215 High Flow Mulcher
- Overall Width
- 69.2 in
- Working Width
- 58.3 in
- Length
- 48 in
HM115 Standard Flow Mulcher
- Overall Width
- 69.2 in
- Working Width
- 58.3 in
- Length
- 48 in
HM112 Standard Flow Mulcher
- Overall Width
- 59.8 in
- Working Width
- 48.8 in
- Length
- 48 in
H65s Hydraulic Hammer
- Operating Weight - With Tool
- 859.8 lb
- Energy Class
- 800.3 ft·lbf
- Machine Class
- 5-9 Ton Mini Excavators, 216-299 Skid Steer/Compact Track Loaders, 415-444 Backhoe Loaders
H55s Hydraulic Hammer
- Operating Weight - With Tool
- 760.6 lb
- Energy Class
- 599.6 ft·lbf
- Machine Class
- 3-6 Ton Mini Excavators, 216-299 Skid Steer/Compact Track Loaders
B8s Silenced Hydraulic Hammer
- Operating Weight - With Tool
- 758.4 lb
- Energy Class
- 848.2 ft·lbf
- Machine Class
- 6-9 Ton Mini Excavators, 216-299 Skid Steer/Compact Track Loaders, 415-444 Backhoe Loaders
B8 Non-Silenced Hydraulic Hammer
- Operating Weight - With Tool
- 771 lb
- Energy Class
- 848.2 ft·lbf
- Machine Class
- 6-9 Ton Mini Excavators, 216-299 Skid Steer/Compact Track Loaders, 415-444 Backhoe Loaders
1220 mm (48 in) Pallet Forks
- Height
- 36.8 in
- Width
- 45.8 in
- Weight
- 211.6 lb
1070 mm (42 in) Pallet Forks
- Height
- 36.8 in
- Width
- 45.8 in
- Weight
- 211.6 lb
2397 mm (94 in) Rod Tine Style Skeleton Bucket
- Width
- 94.4 in
- Weight
- 859.8 lb
- Height
- 25.4 in
2016 mm (80 in) Rod Tine Style Skeleton Bucket
- Width
- 79.4 in
- Weight
- 740.8 lb
- Height
- 25.4 in
2206 mm (86 in) Rod Tine Style Skeleton Bucket
- Width
- 86.9 in
- Weight
- 800.3 lb
- Height
- 25.4 in
BD121 Side Discharge Bucket with sawdust agitator
- Capacity
- 2.3 yd³
- Width
- 85.2 in
- Required Hydraulics
- Standard Flow
BD121 Side Discharge Bucket with sand agitator
- Capacity
- 1.3 yd³
- Width
- 85.2 in
- Required Hydraulics
- Standard Flow
BD118 Side Discharge Bucket with sawdust agitator
- Capacity
- 2 yd³
- Width
- 73.2 in
- Required Hydraulics
- Standard Flow
2188 mm (86 in) Multi-Purpose Bucket with bolt-on teeth and spill guard
- Width
- 86.1 in
- Capacity
- 0.56 yd³
- Weight
- 1018.5 lb
BD118 Side Discharge Bucket with sand agitator
- Capacity
- 1 yd³
- Width
- 73.2 in
- Required Hydraulics
- Standard Flow
2036 mm (80 in) Multi-Purpose Bucket with bolt-on teeth and spill guard
- Width
- 80.2 in
- Capacity
- 0.52 yd³
- Weight
- 970 lb
1883 mm (74 in) Multi-Purpose Bucket with bolt-on teeth and spill guard
- Width
- 74.1 in
- Capacity
- 0.48 yd³
- Weight
- 917.1 lb
1576 mm (62 in) Multi-Purpose Bucket with bolt-on teeth and spill guard
- Width
- 62 in
- Capacity
- 0.39 yd³
- Weight
- 817.9 lb
1730 mm (68 in) Multi-Purpose Bucket with bolt-on teeth and spill guard
- Width
- 68.1 in
- Capacity
- 0.44 yd³
- Weight
- 868.6 lb
MB250 Mixing Bucket
- Capacity
- 0.33 yd³
- Width
- 54.7 in
- Required Hydraulics
- Standard Flow
2340 mm (92 in) Industrial Performance Bucket with bolt-on teeth
- Width
- 92.1 in
- Capacity
- 0.94 yd³
- Weight
- 795.9 lb
MB200 Mixing Bucket
- Capacity
- 0.26 yd³
- Width
- 54.6 in
- Required Hydraulics
- Standard Flow
2188 mm (86 in) Industrial Performance Bucket with bolt-on teeth
- Width
- 86.1 in
- Capacity
- 0.88 yd³
- Weight
- 762.8 lb
2340 mm (92 in) Industrial Performance Bucket with bolt-on cutting edge
- Width
- 92.1 in
- Capacity
- 0.94 yd³
- Weight
- 855.4 lb
2036 mm (80 in) Industrial Performance Bucket with bolt-on teeth
- Width
- 80.2 in
- Capacity
- 0.81 yd³
- Weight
- 729.7 lb
2188 mm (86 in) Industrial Performance Bucket with bolt-on cutting edge
- Width
- 86.1 in
- Capacity
- 0.88 yd³
- Weight
- 815.7 lb
1883 mm (74 in) Industrial Performance Bucket with bolt-on teeth
- Width
- 74.1 in
- Capacity
- 0.75 yd³
- Weight
- 694.5 lb
2036 mm (80 in) Industrial Performance Bucket with bolt-on cutting edge
- Width
- 80.2 in
- Capacity
- 0.81 yd³
- Weight
- 778.2 lb
1730 mm (68 in) Industrial Performance Bucket with bolt-on teeth
- Width
- 68.1 in
- Capacity
- 0.68 yd³
- Weight
- 663.6 lb
1883 mm (74 in) Industrial Performance Bucket with bolt-on cutting edge
- Width
- 74.1 in
- Capacity
- 0.75 yd³
- Weight
- 740.8 lb
1730 mm (68 in) Industrial Performance Bucket with bolt-on cutting edge
- Width
- 68.1 in
- Capacity
- 0.68 yd³
- Weight
- 701.1 lb
1576 mm (62 in) Industrial Grapple Bucket with bolt-on cutting edge
- Width
- 62 in
- Weight
- 1062.6 lb
- Height - Grapples Closed
- 20.7 in
2188 mm (86 in) General Purpose Bucket with bolt-on cutting edge
- Width
- 86.1 in
- Capacity
- 0.82 yd³
- Weight
- 723.1 lb
2036 mm (80 in) General Purpose Bucket with bolt-on cutting edge
- Width
- 80.2 in
- Capacity
- 0.63 yd³
- Weight
- 630.5 lb
1883 mm (74 in) General Purpose Bucket with bolt-on cutting edge
- Width
- 74.1 in
- Capacity
- 0.58 yd³
- Weight
- 597.5 lb
1576 mm (62 in) General Purpose Bucket with bolt-on cutting edge
- Width
- 62 in
- Capacity
- 0.47 yd³
- Weight
- 440.9 lb
1730 mm (68 in) General Purpose Bucket with bolt-on cutting edge
- Width
- 68.1 in
- Capacity
- 0.52 yd³
- Weight
- 551.2 lb
BRX418 Industrial Brushcutter
- Overall Width
- 75.2 in
- Cutting Width
- 72 in
- Maximum Cutting Diameter
- 8 in
BRX318 Industrial Brushcutter
- Overall Width
- 75.2 in
- Cutting Width
- 72 in
- Maximum Cutting Diameter
- 8 in
BRX118 Industrial Brushcutter
- Overall Width
- 75.2 in
- Cutting Width
- 72 in
- Maximum Cutting Diameter
- 8 in
BR118 Brushcutter
- Overall Width
- 74 in
- Cutting Width
- 72 in
- Maximum Cutting Diameter
- 3 in
BR117 Brushcutter
- Overall Width
- 68 in
- Cutting Width
- 66 in
- Maximum Cutting Diameter
- 3 in
BP118C Pickup Broom
- Overall Width
- 90.4 in
- Sweeping Width
- 72 in
- Brush Diameter
- 26 in
BP115C Pickup Broom
- Overall Width
- 78.3 in
- Sweeping Width
- 60 in
- Brush Diameter
- 26 in
BA118C Hydraulic Angle Broom
- Overall Width
- 104 in
- Sweeping Width
- 83 in
- Brush Diameter
- 32 in
BA118C Manual Angle Broom
- Overall Width
- 104 in
- Sweeping Width
- 83 in
- Brush Diameter
- 32 in
2133 mm (84 in) Bale Grab
- Overall Width
- 55.2 in
- Overall Height
- 34.4 in
- Maximum Opening Width
- 84 in
1140 mm (45 in) Dual Tine Bale Spear
- Overall Width
- 55.4 in
- Overall Height
- 51.8 in
- Capacity
- 3007.1 lb
1803 mm (71 in) Bale Grab
- Overall Width
- 55.2 in
- Overall Height
- 34.4 in
- Maximum Opening Width
- 71 in
1883 mm (74 in) Utility Bucket
- Width
- 74.1 in
- Capacity
- 0.68 yd³
- Weight
- 526.9 lb
1576 mm (62 in) Utility Bucket
- Width
- 62 in
- Capacity
- 0.56 yd³
- Weight
- 463 lb
1730 mm (68 in) Utility Bucket
- Width
- 68.1 in
- Capacity
- 0.63 yd³
- Weight
- 496 lb
2036 mm (80 in) Light Material Bucket
- Width
- 80.2 in
- Capacity
- 0.98 yd³
- Weight
- 619.5 lb
1883 mm (74 in) Light Material Bucket
- Width
- 74.1 in
- Capacity
- 0.9 yd³
- Weight
- 586.4 lb
1883 mm (74 in) Industrial Grapple Bucket
- Width
- 74.1 in
- Weight
- 1080.3 lb
- Height - Grapples Closed
- 20.7 in
2035 mm (80 in) Industrial Grapple Bucket
- Width
- 80.2 in
- Weight
- 1115.5 lb
- Height - Grapples Closed
- 20.7 in
1730 mm (68 in) Industrial Grapple Bucket
- Width
- 68.1 in
- Weight
- 1038.4 lb
- Height - Grapples Closed
- 20.7 in
2188 mm (86 in) General Purpose Bucket
- Width
- 86.1 in
- Capacity
- 0.82 yd³
- Weight
- 634.9 lb
1576 mm (62 in) Industrial Grapple Bucket
- Width
- 62 in
- Weight
- 996.5 lb
- Height - Grapples Closed
- 20.7 in
2036 mm (80 in) General Purpose Bucket
- Width
- 80.2 in
- Capacity
- 0.63 yd³
- Weight
- 544.5 lb
1730 mm (68 in) General Purpose Bucket
- Width
- 68.1 in
- Capacity
- 0.52 yd³
- Weight
- 476.2 lb
1883 mm (74 in) General Purpose Bucket
- Width
- 74.1 in
- Capacity
- 0.58 yd³
- Weight
- 515.9 lb
1576 mm (62 in) General Purpose Bucket
- Width
- 62 in
- Capacity
- 0.47 yd³
- Weight
- 374.8 lb
Specifications
Engine
- Gross Power - SAE J1995
- 67.1HP
- Net Power - SAE 1349
- 65.8HP
- Displacement
- 134.3in³
- Stroke
- 3.9in
- Bore
- 3.3in
- Engine Model
- Cat C2.2 CRDI
- Peak Torque - 1,500 rpm - SAE J1995
- 153ft·lbf
- Net Power - ISO 9249
- 66.5HP
Operating Specifications
- Rated Operating Capacity
- 1550lb
- Rated Operating Capacity with Optional Counterweight
- 1650lb
- Tipping Load
- 3100lb
- Breakout Force - Tilt Cylinder
- 3927lb
- Note
- * Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1576 mm (62 in) low profile bucket, Cat 10 × 16.5 tires, standard flow hydraulics, C1 cab (OROPS, mechanical seat), 850 CCA battery
Weights
- Operating Weight
- 5849lb
- Note
- * Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1576 mm (62 in) low profile bucket, Cat 10 × 16.5 tires, standard flow hydraulics, C1 cab (OROPS, mechanical seat), 850 CCA battery
Dimensions
- Wheel Base
- 41.5in
- Length - With Bucket on Ground
- 127.3in
- Length - Without Bucket
- 99.4in
- Height - Top of Cab
- 79.8in
- Vehicle Width over Tires
- 58.9in
- Maximum Overall Height
- 143.8in
- Bucket Pin Height - Maximum Lift
- 110.9in
- Bucket Pin Height - Carry Position
- 8.5in
- Reach - Maximum Lift/Dump
- 21in
- Clearance at Maximum Lift and Dump
- 81.8in
- Ground Clearance
- 6.9in
- Departure Angle
- 27.9°
- Maximum Dump Angle
- 46.7°
- Rack Back Angle - Maximum Height
- 88.9°
- Bumper Overhang - Behind Rear Axle
- 35.2in
- Turning Radius from Center - Bucket
- 77.8in
- Maximum Reach - With Arms Parallel to Ground
- 50.7in
- Turning Radius from Center - Machine Rear
- 59.6in
- Turning Radius from Center - Coupler
- 43.5in
- Note
- * Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1576 mm (62 in) low profile bucket, Cat 10 × 16.5 tires, standard flow hydraulics, C1 cab (OROPS, mechanical seat), 850 CCA battery
Cab
- ROPS
- ISO 3471:2008
- FOPS
- ISO 3449:2005 Level I
Service Refill Capacities
- Chain Box - Each Side
- 1.8gal (US)
- Cooling System
- 3.2gal (US)
- Engine Crankcase
- 2.6gal (US)
- Fuel Tank
- 15.1gal (US)
- Hydraulic System
- 11.9gal (US)
- Hydraulic Tank
- 9gal (US)
Hydraulic System
- Hydraulic Flow - Standard - Loader Hydraulic Pressure
- 3336psi
- Hydraulic Flow - High Flow - Maximum Loader Hydraulic Pressure
- 3336psi
- Hydraulic Flow - Standard - Hydraulic Power (Calculated)
- 33.5HP
- Hydraulic Flow - High Flow - Hydraulic Power (Calculated)
- 50.9HP
- Hydraulic Flow - Standard - Loader Hydraulic Flow
- 18gal/min
- Hydraulic Flow - High Flow - Maximum Loader Hydraulic Flow
- 26gal/min
Power Train
- Travel Speed - Forward or Reverse - One Speed
- 7.6mile/h
- Travel Speed - Forward or Reverse - Two Speed Option
- 11.1mile/h
Air Conditioning System (if equipped)
- Air Conditioning
- The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes.
Noise Level
- Outside Cab***
- 102dB(A)
- Inside Cab**
- 83dB(A)
- Note (3)
- ***The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.
- Note (1)
- Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
- Note (2)
- **The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan spe
Standard/Optional Features
Standard Equipment:
-
- Electrical
-
- 12 volt Electrical System
- 80 ampere Alternator
- Ignition Key Start/Stop Switch
- Lights: Gauge Backlighting, Two Rear Tail Lights, Two Adjustable Front and Rear Halogen Lights, Dome Light
- Backup Alarm
- Heavy Duty Battery, 850 CCA
-
- Operator Environment
-
- Gauges: Fuel Level, Hour Meter
- Operator Warning System Indicators: Air Filter Restriction, Alternator Output, Armrest Raised/Operator Out of Seat, Engine Coolant Temperature, Engine Oil Pressure, Glow Plug Activation, Hydraulic Filter Restriction, Hydraulic Oil Temperature, Parking Brake Engaged
- Fold In Ergonomic Contoured Armrest
- Control Interlock System, when operator leaves seat or armrest raised: Hydraulic System Disables, Hydrostatic Transmission Disables, Parking Brake Engages
- ROPS Cab, Open, Tilt Up
- FOPS, Level I
- Top and Rear Windows
- Floor Mat
- Interior Rearview Mirror
- 12 volt Electric Socket
- Horn
- Hand (Dial) Throttle, Electronic
- Adjustable Joystick Controls
- Anti-theft Security System with 6-button Keypad
- Storage Compartment with Netting
-
- Power Train
-
- Cat C2.2, Turbo Diesel Engine, Meeting Tier 4 Final and Stage V emission standards
- Air Cleaner, Dual Element, Radial Seal
- S·O·SSM Sampling Valve, Hydraulic Oil
- Filters, Cartridge-type, Hydraulic
- Filters, Canister-type, Fuel and Water Separator
- ATAAC/Radiator/Hydraulic Oil Cooler (side-by-side)
- Spring Applied, Hydraulically Released Parking Brakes
- Hydrostatic Transmission
- Four Wheel Chain Drive
-
- Other
-
- Engine Enclosure, Lockable
- Extended Life Antifreeze, –36° C (–33° F)
- Machine Tie Down Points (6)
- Support, Lift Arm
- Hydraulic Oil Level Sight Gauge
- Radiator Coolant Level Sight Gauge
- Radiator, Expansion Bottle
- Cat ToughGuard™ Hose
- Auxiliary, Hydraulics, Continuous Flow
- Heavy Duty, Flat Faced Quick Disconnects with Integrated Pressure Release
- Split D-Ring to Route Work Tool Hoses Along Side of Left Lift Arm
- Electrical Outlet, Beacon
- Belly Pan Cleanout
- Variable Speed Demand Fan
- Product Link™ PL240, Cellular
-
- Mandatory Equipment
-
- Hydraulics, Standard or High Flow
- Quick Coupler, Mechanical or Powered
- Highly Visible Seat Belt, 50 mm (2 in) or 75 mm (3 in)
- EU Preparation Package (Europe only)
- Power Train: One Speed, One Speed with Ride Control, Two Speed
- Tires, 10 × 16.5
- PERFORMANCE PACKAGES:
– Performance Package H1: Standard Flow Hydraulics (No Self Level)
– Performance Package H2: Standard Flow Hydraulics, Dual Direction Electronic Self Level (Raise and Lower), Work Tool Return to Dig, Work Tool Positioner, and Electronic Snubbing (Raise and Lower)
– Performance Package H3: High Flow Hydraulics, Dual Direction Electronic Self Level (Raise and Lower), Work Tool Return to Dig, Work Tool Positioner, and Electronic Snubbing (Raise and Lower) - COMFORT PACKAGES:
– Open ROPS (C1): Foot Throttle, Headliner, Cup Holder, and choice of Seat (High Back, Heated, Air Ride Seat) (No Heater or Door)
– Enclosed ROPS with A/C (C3): Foot Throttle, Headliner, Heater and Defroster, Air Conditioner, Side Windows, Cup Holder, Radio Ready, choice of Seat (Mechanical Suspension or High Back, Heated, Air Ride Seat) and Door (Glass or Polycarbonate)
Optional Equipment:
-
- Optional Equipment
-
- Hand-Foot Style Controls
- External Counterweights
- Beacon, Rotating
- Engine Block Heater – 120V
- Oil, Hydraulic, Cold Operation
- Product Link PL641, Cellular
- Advanced Display with Rearview Camera: Full Color, 127 mm (5 in) LCD screen, Advanced Multi-operator Security System, On-screen Adjustments for Implement Response, Hystat Response, and Creep Control; Standard Equipment in Europe Only
- Bluetooth® Radio with Microphone (AM/FM/Weather Band Receiver with USB and Auxiliary Input Jack)
Attachments
T315 High Flow Trencher with combo teeth
- Standard Boom Length
- 60 in
- Cutting Width
- 6 in
- Chain Type
- Standard
T315 High Flow Trencher with standard teeth
- Standard Boom Length
- 60 in
- Cutting Width
- 8 in
- Chain Type
- Standard
T315 High Flow Trencher with standard teeth
- Standard Boom Length
- 60 in
- Cutting Width
- 6 in
- Chain Type
- Standard
T112 Manual Trencher with rockfrost teeth
- Standard Boom Length
- 48 in
- Cutting Width
- 6 in
- Chain Type
- Rockfrost
T112 Manual Trencher with standard teeth
- Standard Boom Length
- 48 in
- Cutting Width
- 6 in
- Chain Type
- Standard
T112 Manual Trencher with combo teeth
- Standard Boom Length
- 48 in
- Cutting Width
- 6 in
- Chain Type
- Combo
T112 Hydraulic Trencher with standard teeth
- Standard Boom Length
- 48 in
- Cutting Width
- 6 in
- Chain Type
- Standard
T112 Hydraulic Trencher with combo teeth
- Standard Boom Length
- 48 in
- Cutting Width
- 6 in
- Chain Type
- Combo
T112 Hydraulic Trencher with rockfrost teeth
- Standard Boom Length
- 48 in
- Cutting Width
- 6 in
- Chain Type
- Rockfrost
T112 Hydraulic Trencher with standard teeth
- Standard Boom Length
- 48 in
- Cutting Width
- 8 in
- Chain Type
- Standard
T109 Manual Trencher with standard teeth
- Standard Boom Length
- 36 in
- Cutting Width
- 8 in
- Chain Type
- Standard
T109 Manual Trencher with standard teeth
- Standard Boom Length
- 36 in
- Cutting Width
- 6 in
- Chain Type
- Standard
T109 Manual Trencher with rockfrost teeth
- Standard Boom Length
- 36 in
- Cutting Width
- 6 in
- Chain Type
- Rockfrost
T109 Manual Trencher with terminator teeth
- Standard Boom Length
- 36 in
- Cutting Width
- 6 in
- Chain Type
- Terminator
T109 Manual Trencher with combo teeth
- Standard Boom Length
- 36 in
- Cutting Width
- 6 in
- Chain Type
- Combo
T109 Hydraulic Trencher with standard teeth
- Standard Boom Length
- 36 in
- Cutting Width
- 6 in
- Chain Type
- Standard
T109 Hydraulic Trencher with standard teeth
- Standard Boom Length
- 36 in
- Cutting Width
- 8 in
- Chain Type
- Standard
T109 Hydraulic Trencher with rockfrost teeth
- Standard Boom Length
- 36 in
- Cutting Width
- 6 in
- Chain Type
- Rockfrost
T109 Hydraulic Trencher with terminator teeth
- Standard Boom Length
- 36 in
- Cutting Width
- 6 in
- Chain Type
- Terminator
T109 Hydraulic Trencher with combo teeth
- Standard Boom Length
- 36 in
- Cutting Width
- 6 in
- Chain Type
- Combo
3.66 m (12 ft) Straight Snow Push with rubber cutting edge
- Working Width
- 144 in
- Weight
- 952.4 lb
- Length
- 43.7 in
3.05 m (10 ft) Straight Snow Push with rubber cutting edge
- Working Width
- 120 in
- Weight
- 866.4 lb
- Length
- 43.7 in
2.44 m (8 ft) Straight Snow Push with rubber cutting edge
- Working Width
- 96 in
- Weight
- 778.2 lb
- Length
- 43.7 in
DFS124 Silage Defacer
- Overall Width
- 96.5 in
- Weight
- 1108.9 lb
- Required Hydraulics
- Standard Flow
DFS121 Silage Defacer
- Overall Width
- 84.5 in
- Weight
- 1051.6 lb
- Required Hydraulics
- Standard Flow
DFS118 Silage Defacer
- Overall Width
- 72.5 in
- Weight
- 937 lb
- Required Hydraulics
- Standard Flow
HM418 High Flow XHP Hydraulics Mulcher
- Overall Width
- 83.5 in
- Working Width
- 67.2 in
- Length
- 53.3 in
HM316 High Flow XPS Hydraulics Mulcher
- Overall Width
- 74.1 in
- Working Width
- 62.3 in
- Length
- 53.3 in
HM416 High Flow XHP Hydraulics Mulcher
- Overall Width
- 74.1 in
- Working Width
- 58.6 in
- Length
- 53.3 in
HM215 High Flow Mulcher
- Overall Width
- 69.2 in
- Working Width
- 58.3 in
- Length
- 48 in
HM115 Standard Flow Mulcher
- Overall Width
- 69.2 in
- Working Width
- 58.3 in
- Length
- 48 in
HM112 Standard Flow Mulcher
- Overall Width
- 59.8 in
- Working Width
- 48.8 in
- Length
- 48 in
H65s Hydraulic Hammer
- Operating Weight - With Tool
- 859.8 lb
- Energy Class
- 800.3 ft·lbf
- Machine Class
- 5-9 Ton Mini Excavators, 216-299 Skid Steer/Compact Track Loaders, 415-444 Backhoe Loaders
H55s Hydraulic Hammer
- Operating Weight - With Tool
- 760.6 lb
- Energy Class
- 599.6 ft·lbf
- Machine Class
- 3-6 Ton Mini Excavators, 216-299 Skid Steer/Compact Track Loaders
B8s Silenced Hydraulic Hammer
- Operating Weight - With Tool
- 758.4 lb
- Energy Class
- 848.2 ft·lbf
- Machine Class
- 6-9 Ton Mini Excavators, 216-299 Skid Steer/Compact Track Loaders, 415-444 Backhoe Loaders
B8 Non-Silenced Hydraulic Hammer
- Operating Weight - With Tool
- 771 lb
- Energy Class
- 848.2 ft·lbf
- Machine Class
- 6-9 Ton Mini Excavators, 216-299 Skid Steer/Compact Track Loaders, 415-444 Backhoe Loaders
1220 mm (48 in) Pallet Forks
- Height
- 36.8 in
- Width
- 45.8 in
- Weight
- 211.6 lb
1070 mm (42 in) Pallet Forks
- Height
- 36.8 in
- Width
- 45.8 in
- Weight
- 211.6 lb
2397 mm (94 in) Rod Tine Style Skeleton Bucket
- Width
- 94.4 in
- Weight
- 859.8 lb
- Height
- 25.4 in
2016 mm (80 in) Rod Tine Style Skeleton Bucket
- Width
- 79.4 in
- Weight
- 740.8 lb
- Height
- 25.4 in
2206 mm (86 in) Rod Tine Style Skeleton Bucket
- Width
- 86.9 in
- Weight
- 800.3 lb
- Height
- 25.4 in
BD121 Side Discharge Bucket with sawdust agitator
- Capacity
- 2.3 yd³
- Width
- 85.2 in
- Required Hydraulics
- Standard Flow
BD121 Side Discharge Bucket with sand agitator
- Capacity
- 1.3 yd³
- Width
- 85.2 in
- Required Hydraulics
- Standard Flow
BD118 Side Discharge Bucket with sawdust agitator
- Capacity
- 2 yd³
- Width
- 73.2 in
- Required Hydraulics
- Standard Flow
2188 mm (86 in) Multi-Purpose Bucket with bolt-on teeth and spill guard
- Width
- 86.1 in
- Capacity
- 0.56 yd³
- Weight
- 1018.5 lb
BD118 Side Discharge Bucket with sand agitator
- Capacity
- 1 yd³
- Width
- 73.2 in
- Required Hydraulics
- Standard Flow
2036 mm (80 in) Multi-Purpose Bucket with bolt-on teeth and spill guard
- Width
- 80.2 in
- Capacity
- 0.52 yd³
- Weight
- 970 lb
1883 mm (74 in) Multi-Purpose Bucket with bolt-on teeth and spill guard
- Width
- 74.1 in
- Capacity
- 0.48 yd³
- Weight
- 917.1 lb
1576 mm (62 in) Multi-Purpose Bucket with bolt-on teeth and spill guard
- Width
- 62 in
- Capacity
- 0.39 yd³
- Weight
- 817.9 lb
1730 mm (68 in) Multi-Purpose Bucket with bolt-on teeth and spill guard
- Width
- 68.1 in
- Capacity
- 0.44 yd³
- Weight
- 868.6 lb
MB250 Mixing Bucket
- Capacity
- 0.33 yd³
- Width
- 54.7 in
- Required Hydraulics
- Standard Flow
2340 mm (92 in) Industrial Performance Bucket with bolt-on teeth
- Width
- 92.1 in
- Capacity
- 0.94 yd³
- Weight
- 795.9 lb
MB200 Mixing Bucket
- Capacity
- 0.26 yd³
- Width
- 54.6 in
- Required Hydraulics
- Standard Flow
2188 mm (86 in) Industrial Performance Bucket with bolt-on teeth
- Width
- 86.1 in
- Capacity
- 0.88 yd³
- Weight
- 762.8 lb
2340 mm (92 in) Industrial Performance Bucket with bolt-on cutting edge
- Width
- 92.1 in
- Capacity
- 0.94 yd³
- Weight
- 855.4 lb
2036 mm (80 in) Industrial Performance Bucket with bolt-on teeth
- Width
- 80.2 in
- Capacity
- 0.81 yd³
- Weight
- 729.7 lb
2188 mm (86 in) Industrial Performance Bucket with bolt-on cutting edge
- Width
- 86.1 in
- Capacity
- 0.88 yd³
- Weight
- 815.7 lb
1883 mm (74 in) Industrial Performance Bucket with bolt-on teeth
- Width
- 74.1 in
- Capacity
- 0.75 yd³
- Weight
- 694.5 lb
2036 mm (80 in) Industrial Performance Bucket with bolt-on cutting edge
- Width
- 80.2 in
- Capacity
- 0.81 yd³
- Weight
- 778.2 lb
1730 mm (68 in) Industrial Performance Bucket with bolt-on teeth
- Width
- 68.1 in
- Capacity
- 0.68 yd³
- Weight
- 663.6 lb
1883 mm (74 in) Industrial Performance Bucket with bolt-on cutting edge
- Width
- 74.1 in
- Capacity
- 0.75 yd³
- Weight
- 740.8 lb
1730 mm (68 in) Industrial Performance Bucket with bolt-on cutting edge
- Width
- 68.1 in
- Capacity
- 0.68 yd³
- Weight
- 701.1 lb
1576 mm (62 in) Industrial Grapple Bucket with bolt-on cutting edge
- Width
- 62 in
- Weight
- 1062.6 lb
- Height - Grapples Closed
- 20.7 in
2188 mm (86 in) General Purpose Bucket with bolt-on cutting edge
- Width
- 86.1 in
- Capacity
- 0.82 yd³
- Weight
- 723.1 lb
2036 mm (80 in) General Purpose Bucket with bolt-on cutting edge
- Width
- 80.2 in
- Capacity
- 0.63 yd³
- Weight
- 630.5 lb
1883 mm (74 in) General Purpose Bucket with bolt-on cutting edge
- Width
- 74.1 in
- Capacity
- 0.58 yd³
- Weight
- 597.5 lb
1576 mm (62 in) General Purpose Bucket with bolt-on cutting edge
- Width
- 62 in
- Capacity
- 0.47 yd³
- Weight
- 440.9 lb
1730 mm (68 in) General Purpose Bucket with bolt-on cutting edge
- Width
- 68.1 in
- Capacity
- 0.52 yd³
- Weight
- 551.2 lb
BRX418 Industrial Brushcutter
- Overall Width
- 75.2 in
- Cutting Width
- 72 in
- Maximum Cutting Diameter
- 8 in
BRX318 Industrial Brushcutter
- Overall Width
- 75.2 in
- Cutting Width
- 72 in
- Maximum Cutting Diameter
- 8 in
BRX118 Industrial Brushcutter
- Overall Width
- 75.2 in
- Cutting Width
- 72 in
- Maximum Cutting Diameter
- 8 in
BR118 Brushcutter
- Overall Width
- 74 in
- Cutting Width
- 72 in
- Maximum Cutting Diameter
- 3 in
BR117 Brushcutter
- Overall Width
- 68 in
- Cutting Width
- 66 in
- Maximum Cutting Diameter
- 3 in
BP118C Pickup Broom
- Overall Width
- 90.4 in
- Sweeping Width
- 72 in
- Brush Diameter
- 26 in
BP115C Pickup Broom
- Overall Width
- 78.3 in
- Sweeping Width
- 60 in
- Brush Diameter
- 26 in
BA118C Hydraulic Angle Broom
- Overall Width
- 104 in
- Sweeping Width
- 83 in
- Brush Diameter
- 32 in
BA118C Manual Angle Broom
- Overall Width
- 104 in
- Sweeping Width
- 83 in
- Brush Diameter
- 32 in
2133 mm (84 in) Bale Grab
- Overall Width
- 55.2 in
- Overall Height
- 34.4 in
- Maximum Opening Width
- 84 in
1140 mm (45 in) Dual Tine Bale Spear
- Overall Width
- 55.4 in
- Overall Height
- 51.8 in
- Capacity
- 3007.1 lb
1803 mm (71 in) Bale Grab
- Overall Width
- 55.2 in
- Overall Height
- 34.4 in
- Maximum Opening Width
- 71 in
1883 mm (74 in) Utility Bucket
- Width
- 74.1 in
- Capacity
- 0.68 yd³
- Weight
- 526.9 lb
1576 mm (62 in) Utility Bucket
- Width
- 62 in
- Capacity
- 0.56 yd³
- Weight
- 463 lb
1730 mm (68 in) Utility Bucket
- Width
- 68.1 in
- Capacity
- 0.63 yd³
- Weight
- 496 lb
2036 mm (80 in) Light Material Bucket
- Width
- 80.2 in
- Capacity
- 0.98 yd³
- Weight
- 619.5 lb
1883 mm (74 in) Light Material Bucket
- Width
- 74.1 in
- Capacity
- 0.9 yd³
- Weight
- 586.4 lb
1883 mm (74 in) Industrial Grapple Bucket
- Width
- 74.1 in
- Weight
- 1080.3 lb
- Height - Grapples Closed
- 20.7 in
2035 mm (80 in) Industrial Grapple Bucket
- Width
- 80.2 in
- Weight
- 1115.5 lb
- Height - Grapples Closed
- 20.7 in
1730 mm (68 in) Industrial Grapple Bucket
- Width
- 68.1 in
- Weight
- 1038.4 lb
- Height - Grapples Closed
- 20.7 in
2188 mm (86 in) General Purpose Bucket
- Width
- 86.1 in
- Capacity
- 0.82 yd³
- Weight
- 634.9 lb
1576 mm (62 in) Industrial Grapple Bucket
- Width
- 62 in
- Weight
- 996.5 lb
- Height - Grapples Closed
- 20.7 in
2036 mm (80 in) General Purpose Bucket
- Width
- 80.2 in
- Capacity
- 0.63 yd³
- Weight
- 544.5 lb
1730 mm (68 in) General Purpose Bucket
- Width
- 68.1 in
- Capacity
- 0.52 yd³
- Weight
- 476.2 lb
1883 mm (74 in) General Purpose Bucket
- Width
- 74.1 in
- Capacity
- 0.58 yd³
- Weight
- 515.9 lb
1576 mm (62 in) General Purpose Bucket
- Width
- 62 in
- Capacity
- 0.47 yd³
- Weight
- 374.8 lb