fbpx

M319 Wheeled Excavator

The Cat® M319 Wheeled Excavator provides top performance to get the job done faster. Save time and money with low maintenance costs, longer service intervals, and 100 percent daily ground level maintenance. The M319 gives you the power to work longer while putting money in your pocket.

Engine Power - ISO 14396
174 HP
Operating Weight Maximum
46407 lb
Maximum Travel Speed
21.7 mile/h
Engine Power - ISO 14396 (DIN)
176 hp (metric)

Engine

Engine Power - ISO 14396
174HP
Engine Power - ISO 14396 (DIN)
176hp (metric)
Engine Model
C4.4
Net Power - ISO 9249
171HP
Net Power - ISO 9249 (DIN)
174hp (metric)
Bore
4.1in
Displacement
268.5in³
Stroke
127mm
Biodiesel Capability
Up to B20¹
Emissions
Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards.
Note (1)
Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, CEM exhaust gas aftertreatment, alternator, and cooling fan with engine speed at 2,200 rpm. Advertised power is tested per the specified standar
Note (2)
¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO

Machine Weight

Operating Weight Maximum
46407lb
Operating Weight Minimum
41888lb

Transmission

Maximum Travel Speed
21.7mile/h
Forward/Reverse - 1st Gear
6.2mile/h
Forward/Reverse - 2nd Gear
21.7mile/h
Creeper Speed - 1st Gear
3.4mile/h
Creeper Speed - 2nd Gear
9.3mile/h
Drawbar Pull
23380lbf

Hydraulic System

Main System - Maximum Flow - Implement
67gal/min
Maximum Pressure - Implement Circuit - Heavy Lift
5366psi
Maximum Pressure - Implement Circuit - Travel Circuit
5076psi
Maximum Pressure - Implement Circuit - Normal
5076psi

Swing Mechanism

Maximum Swing Torque
32560ft·lbf
Swing Speed
9.4r/min

Service Refill Capacities

Fuel Tank
76.6gal (US)
Diesel Exhaust Fluid (DEF)
5.3gal (US)
Cooling System
35l
Hydraulic Tank
31.7gal (US)
Hydraulic System - Including Tank
74gal (US)

Dimensions

Boom
VA 5.2 m (17'1")
Stick
2.5m (8'2")
Bucket
GD 0.91 m³ (1.19 yd³ )
Shipping Height - Top of Cab
10.7ft
Support Point
11.6ft
Shipping Length
26.6ft
Tail Swing Radius
6.25ft
Counterweight Clearance
4.25ft
Ground Clearance
1.4ft
Undercarriage Length
16.6ft
Wheel Base
8.8ft

Working Ranges and Forces

Boom Type
VA 5.2 m (17'1")
Stick
2.5m (8'2")
Bucket
GD 0.91 m³ (1.19 yd³ )
Dump Height
25.6ft
Digging Height
18.9ft
Reach at Ground Level
30.2ft
Vertical Wall Digging Depth
14.6ft
Stick Forces (ISO)
16861lbf
Bucket Forces (ISO)
26752lbf

working Ranges and Forces

Cutting Height
35.2ft

Air Conditioning System

Note
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.0 kg of refrigerant which has a CO2 equivalent of 1.43 metric tonnes.

Standard Equipment:

  • Note
    • Standard and optional equipment may vary. Consult your Cat dealer for details.
  • Boom And Sticks
    • 5.2 m (17'1") variable adjustable boom
  • Cab
    • ROPS, sound suppression
    • High-resolution 254 mm (10 in) LCD touchscreen monitor
  • Cat Technology
    • VisionLink
    • Remote Flash
    • Remote Troubleshoot
  • Engine
    • Power mode selector
    • One-touch low idle with auto engine speed control
    • Auto engine idle shutdown
    • 52°C (125°F) high-ambient cooling capacity
    • Cold start capability-18°C (0°F)
    • Double element air filter with integrated precleaner
    • Electric fuel priming pump
    • On-demand electric cooling fans
  • Electrical System
    • LED lights on chassis (left-hand, right-hand) and counterweight
    • Programmable time-delay LED working lights
    • Roading and indicator lights, front and rear
    • Maintenance-free batteries
    • Centralized electrical disconnect switch
  • Hydraulic System
    • Automatic swing brake
    • Auto hydraulic oil warm up
    • Electronic main control valve
    • Boom and stick drift reduction valves
    • 1-slider joysticks
    • Heavy lift mode
    • Quick coupler circuit
    • Separate dedicated swing pump
  • Safety And Security
    • Rear- and right-side-view cameras
    • Wide angle mirrors
    • Ground-level engine shutoff switch
    • Anti-skid plate and countersunk bolts on service platform
  • Service And Maintenance
    • Integrated vehicle health management system
    • Sampling ports for Scheduled Oil Sampling (S-O-S)
  • Undercarriage And Structures
    • Automatic brake/axle lock
    • 5000 kg (11,020 lb) counterweight
    • All wheel drive

Optional Equipment:

  • Note
    • Standard and optional equipment may vary. Consult your Cat dealer for details.
  • Boom And Sticks
    • 2.2 m (7'3") stick
    • 2.5 m (8'2") stick
    • 2.9 m (9'6") stick
  • Cab
    • Deluxe cab
    • Premium cab
    • Auxiliary relay
  • Cat Technology
    • Cat Grade Connectivity
    • Cat Grade 2D
    • Cat Grade with Attachment Ready Option (ARO)
    • Cat Grade 3D dual GNSS
    • Laser catcher
    • Grade Assist
    • Cat Payload
    • Cat Tilt Rotator (TRS) Integration
  • Electrical System
    • Electrical refueling pump
  • Hydraulic System
    • 2-slider joysticks
    • Second high-pressure auxiliary circuit (one/ two-way high-pressure flow)
    • Medium pressure auxiliary circuit (one/twoway medium-pressure flow)
    • SmartBoom
    • Ride control
    • Cat tiltrotator support
    • Joystick steering
  • Safety And Security
    • 360° visibility
    • Cat asset tracker
    • Signaling/warning horn
    • Inspection lighting
    • 2D E-Fence
  • Service And Maintenance
    • Automatic lubrication system for implement and swing system
  • Undercarriage And Structures
    • 10.00-20 16 PR, dual tires
    • 11.00-20 16 PR, dual tires
    • 315/70R22.5, no gap dual tires
    • 445/70R 19.5, single tires
    • 300-80-22.5 dual pneumatic, spacerless tre

CTV15-1000

Capacity
1.25 yd³
Operating Weight
2877 lb
Bolt-on Cutting Edge Included
No

CTV15-1200

Capacity
1.5 yd³
Operating Weight
3053 lb
Bolt-on Cutting Edge Included
No

TRS18 Tiltrotator

Machine Class
18-25
Interface Options: Top-Bottom
HCS70/55 / HCS70/55
Rotation Speed
7 seconds, per 1 full rotation

TRS18 Tiltrotator

Machine Class
18-25
Interface Options: Top-Bottom
Pin-on / HCS70/55
Rotation Speed
7 seconds, per 1 full rotation

TRS18 Tiltrotator

Machine Class
18-25
Interface Options: Top-Bottom
Pin-on High Flow / HCS70/55
Rotation Speed
7 seconds, per 1 full rotation

TRS18 Tiltrotator

Machine Class
18-25
Interface Options: Top-Bottom
HCS70/55 / S70/55
Rotation Speed
7 seconds, per 1 full rotation

TRS18 Tiltrotator

Machine Class
18-25
Interface Options: Top-Bottom
Pin-on High Flow / HCS70
Rotation Speed
7 seconds, per 1 full rotation

TRS18 Tiltrotator

Machine Class
18-25
Interface Options: Top-Bottom
HCS70 / S70
Rotation Speed
7 seconds, per 1 full rotation

TRS18 Tiltrotator

Machine Class
18-25
Interface Options: Top-Bottom
HCS70 / HCS70
Rotation Speed
7 seconds, per 1 full rotation

TRS18 Tiltrotator

Machine Class
18-25
Interface Options: Top-Bottom
Pin-on / HCS70
Rotation Speed
7 seconds, per 1 full rotation

SL Thumb 868 mm (34 in)

Number of Teeth/Tines
5
Stored Height
20.4 in
Overall Width
34 in

SL Thumb 545 mm (21 in)

Number of Teeth/Tines
5
Stored Height
20.39 in
Overall Width
21.4 in

SL Thumb 715 mm (28 in)

Number of Teeth/Tines
4
Stored Height
19.5 in
Overall Width
28 in

SL Thumb 595 mm (23 in)

Number of Teeth/Tines
4
Stored Height
20.4 in
Overall Width
23 in

SL Thumb 715 mm (28 in)

Number of Teeth/Tines
4
Stored Height
20.4 in
Overall Width
28 in

SL Thumb 595 mm (23 in)

Number of Teeth/Tines
4
Stored Height
19.5 in
Overall Width
23 in

SL Thumb 664 mm (26 in)

Number of Teeth/Tines
4
Stored Height
19.5 in
Overall Width
26 in

SL Thumb 505 mm (20 in)

Number of Teeth/Tines
4
Stored Height
19.5 in
Overall Width
20 in

SL Thumb 664 mm (26 in)

Number of Teeth/Tines
4
Stored Height
18.8 in
Overall Width
26 in

SL Thumb 505 mm (20 in)

Number of Teeth/Tines
4
Stored Height
18.8 in
Overall Width
20 in

SL Thumb 505 mm (20 in)

Number of Teeth/Tines
3
Stored Height
19.5 in
Overall Width
20 in

SL Thumb 512 mm (20 in)

Number of Teeth/Tines
3
Stored Height
18.8 in
Overall Width
20 in

SL Thumb 345 mm (14 in)

Number of Teeth/Tines
3
Stored Height
19.5 in
Overall Width
14 in

SL Thumb 345 mm (14 in)

Number of Teeth/Tines
3
Stored Height
18.8 in
Overall Width
14 in

Specifications

Standard/Optional Features

Attachments