The Cat® 326 Excavator brings premium performance with simple-to-use technologies like Cat Grade with 2D, Grade Assist, and Payload – all standard equipment from the factory to boost your operator efficiencies up to 45%. Combine these features with an ergonomic cab, longer maintenance intervals that lower your maintenance costs up to 20%, and a power system that reduces fuel consumption by up to 10% and you have a low-cost-per-unit-of-production excavator that’s perfect for medium- to heavy-duty applications.
Not all features are available in all regions. Consult your Cat dealer for specific configurations available in your region.
|
|
|
|
|
|
|
|
Engine
- Net Power - ISO 9249
- 201HP
- Net Power - ISO 9249 (DIN)
- 204hp (metric)
- Engine Model
- Cat C7.1
- Engine Power - ISO 14396
- 202HP
- Engine Power - ISO 14396 (DIN)
- 205hp (metric)
- Bore
- 4in
- Stroke
- 5in
- Displacement
- 428in³
- Biodiesel Capability
- Up to B20¹
- Emissions
- Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards.
- Note (1)
- Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator with engine speed at 2,200 rpm. Advertised power is tested per the specified standard in effect at the time
- Note (2)
- ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO
Weights
- Operating Weight
- 56400lb
- Note
- Long undercarriage, Reach boom, R2.95 m (9'7") stick, 1.54 m³ (2.01 yd³) Heavy Duty (HD) bucket, 600 mm (24") triple grouser shoes and 4600 kg (10,140 lb) counterweight.
Working Ranges & Forces
- Maximum Digging Depth
- 22.4ft
- Boom
- Reach 5.9 m (19'4")
- Stick
- Reach 2.95 m (9'8")
- Bucket
- HD 1.54 m³ (2.01 yd³)
- Maximum Reach at Ground Level
- 33.2ft
- Maximum Cutting Height
- 31.8ft
- Maximum Loading Height
- 21.7ft
- Minimum Loading Height
- 7.8ft
- Maximum Depth Cut for 2440 mm (8 ft) Level Bottom
- 21.8ft
- Maximum Vertical Wall Digging Depth
- 17.5ft
- Bucket Digging Force - ISO
- 37318lbf
- Stick Digging Force - ISO
- 27202lbf
Hydraulic System
- Main System - Maximum Flow
- 481 l/min (127 gal/min)
- Maximum Pressure - Equipment
- 5075psi
- Maximum Pressure - Equipment - Lift Mode
- 5510psi
- Maximum Pressure - Travel
- 5075psi
- Maximum Pressure - Swing
- 4118psi
Swing Mechanism
- Swing Speed
- 9.9r/min
- Maximum Swing Torque
- 78180ft·lbf
Service Refill Capacities
- Fuel Tank Capacity
- 125.2gal (US)
- Cooling System
- 6.6gal (US)
- Engine Oil
- 6.6gal (US)
- Swing Drive
- 3gal (US)
- Final Drive - Each
- 1.2gal (US)
- Hydraulic System - Including Tank
- 81.9gal (US)
- Hydraulic Tank
- 38.8gal (US)
- DEF Tank
- 10.8gal (US)
Dimensions
- Boom
- Reach 5.9 m (19'4")
- Stick
- Reach 2.95 m (9'8")
- Bucket
- HD 1.54 m³ (2.01 yd³)
- Shipping Height - Top of Cab
- 9.8ft
- Handrail Height
- 9.8ft
- Shipping Length
- 33ft
- Tail Swing Radius
- 9.8ft
- Counterweight Clearance
- 1.4ft
- Ground Clearance
- 3.5ft
- Track Length
- 15.2ft
- Length to Center of Rollers
- 12.6ft
- Track Gauge
- 8.5ft
- Transport Width
- 10.5ft
Air Conditioning System
- Note (1)
- The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.85 kg of refrigerant which has a CO2 equivalent of 1.216 metric tonnes.
Sustainability
- Recyclability
- 97%
Standard Equipment:
-
- Note
-
- Standard and optional equipment may vary. Consult your Cat dealer for details.
-
- Cab
-
- Rollover protective structure (ROPS)
-
- Cat Technologies
-
- VisionLink®
- Remote Flash
- Remote Troubleshoot
- Cat Grade 2D
- Cat Assist
- Cat Payload
-
- Electrical System
-
- Maintenance free batteries
- Programmable time-delay LED working lights
- LED chassis light, left-hand/right-hand boom lights, cab lights
-
- Engine
-
- Cat C7.1 single turbo diesel engine
- Three selectable power modes
- One-touch low idle with automatic
- engine speed control
- Auto engine idle shutdown
- 52° C (125° F) high-ambient cooling capacity with de-rate
- –18° C (0° F) cold start capability
- Double element air filter with integrated precleaner
- Reversing electric cooling fans
-
- Hydraulic System
-
- Boom and stick regeneration circuits
- Auto hydraulic warm up
- Auto two-speed travel
- Boom and stick drift reduction valve
- Auto dig boost
- Auto heavy lift
- Tandem-type electronic main pump
- Element-type main hydraulic filter
-
- Safety And Security
-
- 2D E-Fence
- Auto hammer stop
- Rearview camera
- Right-side-view camera
- Lift assist
- Ground-level engine shutoff switch
- Lockable disconnect switch
- Right-hand handrail and hand hold
- Signaling/warning horn
-
- Service And Maintenance
-
- Scheduled Oil Sampling (S·O·S℠) ports
- Ground-level and platform-level engine oil dipsticks
- Integrated vehicle health management system
-
- Undercarriage And Structures
-
- Long undercarriage
- Tie-down points on base frame
- 4600 kg (10,141 lb) counterweight
Optional Equipment:
-
- Note
-
- Standard and optional equipment may vary. Consult your Cat dealer for details.
-
- Booms And Sticks
-
- 5.9 m (19'4") Reach boom
- 5.9 m (19'4") HD Reach boom
- 2.8 m + 3.3 m (9'2" + 10'10") Variable Angle boom
- 10.2 m (33'6") Super Long Reach boom
- 3.6 m (11'10") Reach stick
- 2.95 m (9'8") Reach stick
- 2.95 m (9'8") HD Reach stick
- 2.5 m (8'2") Reach stick
- 7.85 m (25'9") Super Long Reach stick
-
- Cab
-
- Mechanical-suspension seat (Comfort only)
- Air-adjustable seat with heat (Deluxe only)
- Auto adjustable seat with heat and air ventilation (Premium only)
- High-resolution 203 mm (8 in) LCD touchscreen monitor
- High-resolution 254 mm (10 in) LCD touchscreen monitor
- Cat Stick Steer
- Auxiliary relay
-
- Cat Technologies
-
- VisionLink Productivity
- Cat Grade Connectivity
- Cat Grade 2D with Attachment Ready Option (ARO)
- Cat Grade 3D single GNSS
- Cat Grade 3D dual GNSS
- Cat Tilt Rotator (TRS) Integration
- Operator Coaching
-
- Electrical System
-
- 360° lighting
-
- Engine
-
- –32° C (–25° F) cold start capability
-
- Hydraulic System
-
- SmartBoom™ (Europe only)
- Hydraulic efficiency monitoring
-
- Safety And Security
-
- Cat Command (remote control)
- 360° visibility
- Swing alarm
- Inspection lighting
-
- Service And Maintenance
-
- Electric refueling pump with auto shutoff
-
- Undercarriage And Structures
-
- Long narrow undercarriage
- 600 mm (24") triple grouser shoes
- 600 mm (24") double grouser shoes
- 600 mm (24") single grouser shoes
- 700 mm (28") triple grouser shoes
- 790 mm (31") triple grouser shoes
- 900 mm (35") triple grouser track shoes
- 7400 kg (16,300 lb) counterweight for Super Long Reach
CB-Linkage, 4 Tine
- Weight
- 2022 lb
- Width
- 48 in
- Tine Spacing
- 15.75 in
CB-Linkage, 5 Tine
- Weight
- 2406 lb
- Width
- 60 in
- Tine Spacing
- 15.75 in
CB-Linkage, 3 Tine
- Weight
- 1555 lb
- Width
- 36 in
- Tine Spacing
- 15.75 in
P224 Secondary Pulverizer
- Cycle Time - Open
- 1.9 s
- Cycle Time - Close
- 1.3 s
- Crushing Force - Primary Cutter
- 409 Sh Ton
P318 Primary Pulverizer
- Cycle Time - Open
- 1.6 s
- Cycle Time - Close
- 1 s
- Crushing Force - Primary Cutter
- 308 Sh Ton
P324 Primary Pulverizer
- Cycle Time - Open
- 1.8 s
- Cycle Time - Close
- 1.2 s
- Crushing Force - Primary Cutter
- 446 Sh Ton
MP318 Universal Jaw
- Cycle Time - Open
- 1.6 s
- Excavator Minimum
- 18 tons
- Cycle Time - Close
- 1 s
MP324 Universal Jaw
- Cycle Time - Open
- 1.6 s
- Excavator Minimum
- 24 tons
- Cycle Time - Close
- 1 s
MP324 Tank Shear
- Cycle Time - Open
- 1.8 s
- Excavator Minimum
- 24 tons
- Cycle Time - Close
- 1.2 s
MP318 Shear Jaw
- Cycle Time - Open
- 1.6 s
- Excavator Minimum
- 18 tons
- Cycle Time - Close
- 1 s
MP324 Shear Jaw
- Cycle Time - Open
- 1.8 s
- Excavator Minimum
- 24 tons
- Cycle Time - Close
- 1.2 s
MP318 Pulverizer Jaw
- Cycle Time - Open
- 1.6 s
- Excavator Minimum
- 18 tons
- Cycle Time - Close
- 1 s
MP324 Pulverizer Jaw
- Cycle Time - Open
- 1.8 s
- Excavator Minimum
- 24 tons
- Cycle Time - Close
- 1.2 s
MP318 Demolition Jaw
- Cycle Time - Open
- 1.6 s
- Excavator Minimum
- 18 tons
- Cycle Time - Close
- 1 s
MP324 Demolition Jaw
- Cycle Time - Open
- 1.8 s
- Excavator Minimum
- 24 tons
- Cycle Time - Close
- 1.2 s
MP318 Concrete Cutter Jaw
- Cycle Time - Open
- 1.6 s
- Excavator Minimum
- 18 tons
- Excavator Maximum
- 25 tons
MP324 Concrete Cutter Jaw
- Cycle Time - Open
- 1.8 s
- Excavator Minimum
- 24 tons
- Cycle Time - Close
- 1.2 s
HM4015 Standard Forestry Mulcher
- Motor
- Variable Torque Hydraulic Piston Motor
- Overall Width
- 74 in
- Drive Method
- Poly Chain Belt
HM4815 Dedicated Bite Limiter Forestry Mulcher
- Motor
- Variable Torque Hydraulic Piston Motor
- Overall Width
- 77.6 in
- Drive Method
- Poly Chain Belt
HM5515 Standard Forestry Mulcher
- Motor
- Variable Torque Hydraulic Piston Motor
- Overall Width
- 78 in
- Drive Method
- Poly Chain Belt
H120 S Hydraulic Hammer
- Impact Energy Class
- 3500 ft·lbf
- Blows per Minute
- 350-620
- Maximum Operating Weight
- 4101 lb
H120 GC S Hammer
- Impact Energy Class
- 2950 ft-lb
- Blows per Minute
- 400-800
- Maximum Operating Weight
- 3927 lb
H130 GC S Hammer
- Impact Energy Class
- 4425 ft-lb
- Blows per Minute
- 350-700
- Maximum Operating Weight
- 5471.4 lb
GSH440-1550-5
- Capacity
- 2 yd³
- Maximum Lift Capacity
- 22046 lb
- Shell Type Options
- Semi-open
GSH440-1150-S
- Capacity
- 1.5 yd³
- Maximum Lift Capacity
- 22046 lb
- Shell Type Options
- Semi-open
GSH525-950
- Capacity
- 1.25 yd³
- Maximum Lift Capacity
- 22046 lb
- Shell Type Options
- Semi-open, Closed
GSH425-750-S
- Capacity
- 1 yd³
- Maximum Lift Capacity
- 22046 lb
- Shell Type Options
- Semi-open
GSH425-950-S
- Capacity
- 1.25 yd³
- Maximum Lift Capacity
- 22046 lb
- Shell Type Options
- Semi-open
GSH525-750
- Capacity
- 1 yd³
- Maximum Lift Capacity
- 22046 lb
- Shell Type Options
- Semi-open, Closed
G324 WH Demolition & Sorting Grapple
- Grapple Area
- 2.35 yd³
- Weight
- 4639 lb
- Machine Class
- 23-30 Ton Excavators
G324 WH Demolition & Sorting Grapple
- Grapple Area
- 2.62 yd³
- Weight
- 4861 lb
- Machine Class
- 23-30 Ton Excavators
G324 Demolition & Sorting Grapple
- Grapple Area
- 0.98 yd³
- Weight
- 3940 lb
- Machine Class
- 23-30 Ton Excavators
G324 WH Demolition & Sorting Grapple
- Grapple Area
- 1.96 yd³
- Weight
- 4418 lb
- Machine Class
- 23-30 Ton Excavators
CTV20-1500-BOCE
- Capacity
- 2 yd³
- Operating Weight
- 4480 lb
- Bolt-on Cutting Edge Included
- Yes
CTV20-1700
- Capacity
- 2.25 yd³
- Operating Weight
- 4180 lb
- Bolt-on Cutting Edge Included
- No
CTV20-1300
- Capacity
- 1.75 yd³
- Operating Weight
- 3893 lb
- Bolt-on Cutting Edge Included
- No
CTV20-1500
- Capacity
- 2 yd³
- Operating Weight
- 4045 lb
- Bolt-on Cutting Edge Included
- No
CTV15-1900
- Capacity
- 2.5 yd³
- Operating Weight
- 3673 lb
- Bolt-on Cutting Edge Included
- No
CTV15-1900
- Capacity
- 2.5 yd³
- Operating Weight
- 4028 lb
- Bolt-on Cutting Edge Included
- Yes
CTV15-1500
- Capacity
- 2 yd³
- Operating Weight
- 3318 lb
- Bolt-on Cutting Edge Included
- No
CTV15-1700
- Capacity
- 2.25 yd³
- Operating Weight
- 3497 lb
- Bolt-on Cutting Edge Included
- No
CTV15-1000
- Capacity
- 1.25 yd³
- Operating Weight
- 2877 lb
- Bolt-on Cutting Edge Included
- No
CTV15-1200
- Capacity
- 1.5 yd³
- Operating Weight
- 3053 lb
- Bolt-on Cutting Edge Included
- No
S80 S Type Excavator Coupler: 573-3169
- Weight
- 939 lb
- Lifting Hook Capacity
- 10 ton (US)
- Width
- 23.23 in
S80 S Type Excavator Coupler: 573-3171
- Weight
- 1005 lb
- Lifting Hook Capacity
- 10 ton (US)
- Width
- 23.23 in
S70 S Type Excavator Coupler: 566-2349
- Weight
- 571 lb
- Lifting Hook Capacity
- 8 ton (US)
- Width
- 17.72 in
S70 S Type Excavator Coupler: 566-2351
- Weight
- 628 lb
- Lifting Hook Capacity
- 8 ton (US)
- Width
- 17.72 in
Pin Grabber Coupler (312-Linkage): 388-6156
- Minimum Carrier Weight
- 11 ton (US)
- Maximum Carrier Weight
- 15 ton (US)
- Weight
- 414 lb
Pin Grabber Coupler (312-Linkage): 455-3914
- Minimum Carrier Weight
- 11 ton (US)
- Maximum Carrier Weight
- 15 ton (US)
- Weight
- 414 lb
Hydraulic Connecting S Type Coupler HCS70/55: 598-7849
- Machine Class
- 24-30
- Weight
- 789 lb
- Height
- 20.2 in
Hydraulic Connecting S Type Coupler HCS80: 583-0203
- Machine Class
- 24-40
- Height
- 20.2 in
- Weight
- 959 lb
Hydraulic Connecting S Type Coupler HCS80: 583-0212
- Machine Class
- 24-40
- Weight
- 1027 lb
- Height
- 21.2 in
Hydraulic Connecting S Type Coupler HCS70/55: 582-9886
- Machine Class
- 24-30
- Height
- 17.9 in
- Maximum Operating Pressure
- 5076 psi
Hydraulic Connecting S Type Coupler HCS70/55: 582-9976
- Machine Class
- 24-30
- Height
- 20.1 in
- Maximum Operating Pressure
- 5076 psi
Hydraulic Connecting S Type Coupler HCS70: 582-8929
- Machine Class
- 14-30
- Maximum Operating Pressure
- 5076 psi
- Weight
- 648 lb
Hydraulic Connecting S Type Coupler HCS70: 580-0407
- Machine Class
- 14-30
- Height
- 20.6 in
- Maximum Operating Pressure
- 5076 psi
Hydraulic Connecting S Type Coupler HCS70: 598-7847
- Machine Class
- 14-30
- Height
- 20.7 in
- Maximum Operating Pressure
- 5076 psi
Severe Duty Bucket 1050 mm (42 in)
- Width
- 42 in
- Capacity
- 1.41 yd³
- Weight
- 2441 lb
Severe Duty Bucket 1200 mm (48 in)
- Width
- 48 in
- Capacity
- 1.74 yd³
- Weight
- 2456 lb
Severe Duty Bucket 900 mm (36 in)
- Width
- 36 in
- Capacity
- 1.15 yd³
- Weight
- 2229 lb
Severe Duty Bucket 1050 mm (42 in)
- Width
- 42 in
- Capacity
- 1.46 yd³
- Weight
- 2284 lb
Severe Duty Bucket 900 mm (36 in)
- Width
- 36 in
- Capacity
- 1.19 yd³
- Weight
- 2092 lb
Severe Duty Bucket 750 mm (30 in)
- Width
- 30 in
- Capacity
- 0.93 yd³
- Weight
- 1933 lb
Severe Duty Bucket 600 mm (24 in)
- Width
- 24 in
- Capacity
- 0.68 yd³
- Weight
- 1702 lb
Severe Duty Bucket 600 mm (24 in)
- Width
- 24 in
- Capacity
- 0.67 yd³
- Weight
- 1751 lb
Heavy Duty Bucket 1650 mm (66 in)
- Width
- 66 in
- Capacity
- 2.58 yd³
- Weight
- 2853 lb
Heavy Duty Bucket 1500 mm (60 in)
- Width
- 60 in
- Capacity
- 2.21 yd³
- Weight
- 2903 lb
Heavy Duty Bucket 1500 mm (60 in)
- Width
- 60 in
- Capacity
- 2.3 yd³
- Weight
- 2683 lb
Heavy Duty Bucket 1350 mm (54 in)
- Width
- 54 in
- Capacity
- 1.95 yd³
- Weight
- 2696 lb
Heavy Duty Power Bucket 1350 mm (54 in)
- Width
- 54 in
- Capacity
- 2.01 yd³
- Weight
- 2595 lb
Heavy Duty Bucket 1200 mm (48 in)
- Width
- 48 in
- Capacity
- 1.67 yd³
- Weight
- 2487 lb
Heavy Duty Bucket 1350 mm (54 in)
- Width
- 54 in
- Capacity
- 2.01 yd³
- Weight
- 2504 lb
Heavy Duty Bucket 1200 mm (47 in)
- Width
- 47 in
- Capacity
- 1.74 yd³
- Weight
- 2313 lb
Heavy Duty Power Bucket 1200 mm (48 in)
- Width
- 48 in
- Capacity
- 1.74 yd³
- Weight
- 2392 lb
Heavy Duty Power Bucket 1050 mm (42 in)
- Width
- 42 in
- Capacity
- 1.46 yd³
- Weight
- 2220 lb
Heavy Duty Bucket 1050 mm (42 in)
- Width
- 42 in
- Capacity
- 1.46 yd³
- Weight
- 2156 lb
Heavy Duty Bucket 900 mm (36 in)
- Width
- 36 in
- Capacity
- 1.19 yd³
- Weight
- 1978 lb
Heavy Duty Bucket 750 mm (30 in)
- Width
- 30 in
- Capacity
- 0.9 yd³
- Weight
- 1854 lb
Heavy Duty Bucket 750 mm (30 in)
- Width
- 30 in
- Capacity
- 0.93 yd³
- Weight
- 1792 lb
Heavy Duty Bucket 600 mm (24 in)
- Width
- 24 in
- Capacity
- 0.68 yd³
- Weight
- 1618 lb
General Duty – Wide Tip Bucket 1550 mm (62 in)
- Width
- 70.9 in
- Capacity
- 2.97 yd³
- Weight
- 3276 lb
General Duty-Wide Tip Bucket 1350 mm (54 in)
- Width
- 54 in
- Capacity
- 2.4 yd³
- Weight
- 2672 lb
General Duty Bucket 1350 mm (54 in)
- Width
- 54 in
- Capacity
- 2.4 yd³
- Weight
- 2511 lb
General Duty-Wide Tip Bucket 1200 mm (48 in)
- Width
- 48 in
- Capacity
- 2.07 yd³
- Weight
- 2467 lb
General Duty Bucket 1200 mm (48 in)
- Width
- 48 in
- Capacity
- 2.07 yd³
- Weight
- 2319 lb
General Duty Bucket 1050 mm (42 in)
- Width
- 42 in
- Capacity
- 1.75 yd³
- Weight
- 2130 lb
General Duty-Wide Tip Bucket 1050 mm (42 in)
- Width
- 42 in
- Capacity
- 1.75 yd³
- Weight
- 2251 lb
General Duty Bucket 900 mm (36 in)
- Width
- 36 in
- Capacity
- 1.43 yd³
- Weight
- 1980 lb
General Duty-Wide Tip Bucket 900 mm (36 in)
- Width
- 36 in
- Capacity
- 1.43 yd³
- Weight
- 2103 lb
General Duty-Wide Tip Bucket 750 mm (30 in)
- Width
- 30 in
- Capacity
- 1.13 yd³
- Weight
- 1863 lb
General Duty Bucket 750 mm (30 in)
- Width
- 30 in
- Capacity
- 1.12 yd³
- Weight
- 1764 lb
General Duty Bucket 600 mm (24 in)
- Width
- 24 in
- Capacity
- 0.82 yd³
- Weight
- 1605 lb
General Duty-Wide Tip Bucket 600 mm (24 in)
- Width
- 24 in
- Capacity
- 0.83 yd³
- Weight
- 1670 lb
PROPLUS Thumb 1332 mm (52 in)
- Number of Teeth/Tines
- 4
- Stored Height
- 39.8 in
- Overall Width
- 52.4 in
PROPLUS Thumb 1206 mm (47 in)
- Number of Teeth/Tines
- 4
- Stored Height
- 39.8 in
- Overall Width
- 47.5 in
PROPLUS Thumb 1086 mm (43 in)
- Number of Teeth/Tines
- 4
- Stored Height
- 39.8 in
- Overall Width
- 42.8 in
PROPLUS Thumb 1332 mm (52 in)
- Number of Teeth/Tines
- 6
- Stored Height
- 35.2 in
- Overall Width
- 52.4 in
PROPLUS Thumb 1206 mm (47 in)
- Number of Teeth/Tines
- 6
- Stored Height
- 35.2 in
- Overall Width
- 47.5 in
PROPLUS Thumb 1086 mm (43 in)
- Number of Teeth/Tines
- 6
- Stored Height
- 35.2 in
- Overall Width
- 42.8 in
PROPLUS Thumb 1086 mm (43 in)
- Number of Teeth/Tines
- 5
- Stored Height
- 35.2 in
- Overall Width
- 42.8 in
PROPLUS Thumb 1086 mm (43 in)
- Number of Teeth/Tines
- 2
- Stored Height
- 39.8 in
- Overall Width
- 42.8 in
PROPLUS Thumb 926 mm (36 in)
- Number of Teeth/Tines
- 5
- Stored Height
- 35.2 in
- Overall Width
- 36.5 in
PROPLUS Thumb 926 mm (36 in)
- Number of Teeth/Tines
- 2
- Stored Height
- 39.8 in
- Overall Width
- 36.5 in
PROPLUS Thumb 926 mm (36 in)
- Number of Teeth/Tines
- 2
- Stored Height
- 39.8 in
- Overall Width
- 36.5 in
PROPLUS Thumb 741 mm (29 in)
- Number of Teeth/Tines
- 2
- Stored Height
- 39.8 in
- Overall Width
- 29.2 in
PROPLUS Thumb 741 mm (29 in)
- Number of Teeth/Tines
- 2
- Stored Height
- 39.8 in
- Overall Width
- 29.2 in
PROPLUS Thumb 741 mm (29 in)
- Number of Teeth/Tines
- 2
- Stored Height
- 39.8 in
- Overall Width
- 29.2 in
PROPLUS Thumb 926 mm (36 in)
- Number of Teeth/Tines
- 4
- Stored Height
- 35.2 in
- Overall Width
- 36.5 in
PROPLUS Thumb 775 mm (31 in)
- Number of Teeth/Tines
- 4
- Stored Height
- 35.2 in
- Overall Width
- 30.5 in
PROPLUS Thumb 775 mm (31 in)
- Number of Teeth/Tines
- 3
- Stored Height
- 35.2 in
- Overall Width
- 30.5 in
PROPLUS Thumb 775 mm (31 in)
- Number of Teeth/Tines
- 4
- Stored Height
- 35.2 in
- Overall Width
- 30.5 in
PRO Thumb 1332 mm (52 in)
- Number of Teeth/Tines
- 4
- Stored Height
- 39.8 in
- Overall Width
- 52.4 in
PRO Thumb 1206 mm (48 in)
- Number of Teeth/Tines
- 4
- Stored Height
- 39.8 in
- Overall Width
- 47.5 in
PRO Thumb 1086 mm (43 in)
- Number of Teeth/Tines
- 4
- Stored Height
- 39.8 in
- Overall Width
- 42.8 in
PRO Thumb 1332 mm (52 in)
- Number of Teeth/Tines
- 6
- Stored Height
- 35.2 in
- Overall Width
- 52.4 in
PRO Thumb 1086 mm (43 in)
- Number of Teeth/Tines
- 6
- Stored Height
- 35.2 in
- Overall Width
- 42.8 in
PRO Thumb 1206 mm (48 in)
- Number of Teeth/Tines
- 6
- Stored Height
- 35.2 in
- Overall Width
- 47.5 in
PRO Thumb 1086 mm (43 in)
- Number of Teeth/Tines
- 2
- Stored Height
- 39.8 in
- Overall Width
- 42.8 in
PRO Thumb 1086 mm (43 in)
- Number of Teeth/Tines
- 5
- Stored Height
- 35.2 in
- Overall Width
- 42.8 in
PRO Thumb 926 mm (36 in)
- Number of Teeth/Tines
- 5
- Stored Height
- 35.2 in
- Overall Width
- 36.5 in
PRO Thumb 926 mm (37 in)
- Number of Teeth/Tines
- 2
- Stored Height
- 39.8 in
- Overall Width
- 36.5 in
PRO Thumb 926 mm (37 in)
- Number of Teeth/Tines
- 2
- Stored Height
- 39.8 in
- Overall Width
- 36.5 in
PRO Thumb 741 mm (29 in)
- Number of Teeth/Tines
- 2
- Stored Height
- 39.8 in
- Overall Width
- 29.2 in
PRO Thumb 741 mm (29 in)
- Number of Teeth/Tines
- 2
- Stored Height
- 39.8 in
- Overall Width
- 29.2 in
PRO Thumb 775 mm (31 in)
- Number of Teeth/Tines
- 4
- Stored Height
- 35.2 in
- Overall Width
- 30.5 in
PRO Thumb 926 mm (37 in)
- Number of Teeth/Tines
- 4
- Stored Height
- 35.2 in
- Overall Width
- 36.5 in
PRO Thumb 775 mm (31 in)
- Number of Teeth/Tines
- 3
- Stored Height
- 35.2 in
- Overall Width
- 30.5 in
PRO Thumb 775 mm (31 in)
- Number of Teeth/Tines
- 4
- Stored Height
- 35.2 in
- Overall Width
- 30.5 in
PRO Thumb 741 mm (29 in)
- Number of Teeth/Tines
- 2
- Stored Height
- 39.8 in
- Overall Width
- 29.2 in
Cat® Grade Connectivity
Cat® Seat Belt Reminder
Cat® Detect with Smart Camera
Cat® Detect with Surround Cameras
Cat® Detect with Rear Camera
S3025 Rotating Scrap & Demolition Shear
- Weight - Boom Mount
- 5370 lb
- Weight - Stick Mount
- 5117 lb
- Length
- 126 in
S3035 Rotating Scrap & Demolition Shear
- Weight - Boom Mount
- 7553 lb
- Weight - Stick Mount
- 7057 lb
- Length
- 137 in
UTIL Thumb 600 mm (24 in)
- Number of Teeth/Tines
- 2
- Stored Height
- 18.6 in
- Overall Width
- 16 in
UTIL Thumb 612 mm (24 in)
- Number of Teeth/Tines
- 2
- Stored Height
- 19.6 in
- Overall Width
- 24.1 in
SL Thumb 732 mm (29 in)
- Number of Teeth/Tines
- 4
- Stored Height
- 23.1 in
- Overall Width
- 28.8 in
SL Thumb 732 mm (29 in)
- Number of Teeth/Tines
- 4
- Stored Height
- 22 in
- Overall Width
- 23.9 in
SL Thumb 596 mm (24 in)
- Number of Teeth/Tines
- 4
- Stored Height
- 23.1 in
- Overall Width
- 23.5 in
SL Thumb 446 mm (18 in)
- Number of Teeth/Tines
- 3
- Stored Height
- 22 in
- Overall Width
- 17.6 in
SL Thumb 596 mm (24 in)
- Number of Teeth/Tines
- 4
- Stored Height
- 22 in
- Overall Width
- 23.5 in