The 317 Hydraulic Excavator boosts productivity on your jobsite. Standard, easy-to-use Cat® technologies, performance upgrades, and low fuel and maintenance costs allow you to move material all day with speed and precision while keeping more money in your pocket.
|
|
|
|
Engine
- Net Power - ISO 9249
- 133HP
- Net Power - ISO 9249 (DIN)
- 134hp (metric)
- Engine Model
- Cat C3.6
- Engine Power - ISO 14396
- 134HP
- Engine Power - ISO 14396 (DIN)
- 136hp (metric)
- Bore
- 4in
- Stroke
- 5in
- Displacement
- 220in³
- Biodiesel Capability
- Up to B20¹
- Emissions
- Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards.
- Note (1)
- Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator with engine speed at 2,200 rpm. Advertised power is tested per the specified standard in effect at the time
- Note (2)
- ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO
Weights
- Operating Weight
- 40200lb
Working Ranges & Forces
- Maximum Digging Depth
- 21ft
- Boom
- Reach 5.1 m (16'9")
- Stick
- Reach R2.9 m (9'6")
- Bucket
- GD 0.76 m³ (0.99 yd³)
- Maximum Reach at Ground Level
- 29.6ft
- Maximum Cutting Height
- 29.1ft
- Maximum Loading Height
- 20.6ft
- Minimum Loading Height
- 6.5ft
- Maximum Depth Cut for 2440 mm (8 ft) Level Bottom
- 20.2ft
- Maximum Vertical Wall Digging Depth
- 16.3ft
- Minimum Working Equipment Radius
- 9.6ft
- Bucket Digging Force - ISO
- 27650lbf
- Stick Digging Force - ISO
- 16860lbf
Hydraulic System
- Main System - Maximum Flow
- 296 L/min (78 gal/min)
- Maximum Pressure - Equipment
- 5076psi
- Maximum Pressure - Travel
- 5076psi
- Maximum Pressure - Swing
- 3741psi
Swing Mechanism
- Swing Speed
- 8.7r/min
- Maximum Swing Torque
- 47647ft·lbf
Service Refill Capacities
- Fuel Tank Capacity
- 71.6gal (US)
- Cooling System
- 5.8gal (US)
- Engine Oil
- 2.9gal (US)
- Final Drive - Each
- 1.6gal (US)
- Hydraulic System - Including Tank
- 24.8gal (US)
- Hydraulic Tank
- 23gal (US)
- DEF Tank
- 5.9gal (US)
Dimensions
- Boom
- Reach 5.1 m (16'9")
- Stick
- Reach R2.9 m (9'6")
- Bucket
- GD 0.76 m³ (0.99 yd³)
- Shipping Height - Top of Cab
- 9.6ft
- Handrail Height
- 9.6ft
- Shipping Length
- 28.1ft
- Tail Swing Radius
- 8.2ft
- Counterweight Clearance
- 3.3ft
- Ground Clearance
- 1.4ft
- Track Length
- 13ft
- Length to Center of Rollers
- 10.4ft
- Track Gauge
- 6.5ft
- Transport Width
- 8.8ft
Air Conditioning System
- Air Conditioning
- The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.9 hg of refrigerant which has a CO2 equivalent of 1.287 metric tonnes.
Standard Equipment:
-
- Note
-
- Standard and optional equipment may vary. Consult your Cat dealer for details.
-
- Boom And Sticks
-
- 5.1 m (16'9") Reach Boom
-
- Cab
-
- Rollover protective structure (ROPS)
- Deluxe Cab: air suspension heated seat, 10" touch screen monitor
-
- Cat Technologies
-
- Cat Product Link
- Remote Flash
- Remote Troubleshoot
- Cat Grade with 2D
- Cat Assist
- Cat Payload
- 2D E-Fence
- Work tool recognition
- Work tool tracking
- Auto hammer stop
-
- Electrical System
-
- Maintenance free battery
- LED chassis light, left-side/right-side boom lights, cab lights
- Programmable time-delay LED working lights
-
- Engine
-
- Cat C4.4 single turbo diesel engine
- One-touch low idle with automatic engine speed control
- Automatic engine shutdown
- Electric fuel priming pump
- Two-stage fuel filtration system with water separator and indicator
- Sealed double element air filter with integrated precleaner
- Electric cooling fans
- Biodiesel capability up to B20
-
- Hydraulic System
-
- Boom and stick regeneration circuit
- Auto hydraulic warm up
- Auto two speed travel
- Electric main control valve
- Boom and stick drift reduction valve
- Element-type main hydraulic filter
- Single-type electronic main pump
-
- Safety And Security
-
- Rear and right-side-view cameras
- Ground-level engine shutoff switch
- Service platform with anti-skid plate and countersunk bolts
- Signaling/warning horn
- Hydraulic lock out lever
-
- Service And Maintenance
-
- Side entry to service platform
- Grouped engine oil and fuel filters
- Ground-level engine oil dipstick
- Sampling ports for Scheduled Oil Sampling (S·O·S)
-
- Undercarriage And Structures
-
- Grease lubricated track link
- Tie down points on base frame
Optional Equipment:
-
- Note
-
- Standard and optional equipment may vary. Consult your Cat dealer for details.
-
- Boom And Sticks
-
- 2.6 m (8'6") Reach stick
- 2.9 m (9'6") Reach stick
- 2.9 m (9'6") Thumb Ready stick
- 3.1 m (10'2") Reach stick
-
- Cab
-
- Cat Stick Steer
- Auxiliary relay
-
- Cat Technologies
-
- Cat Grade with Advanced 2D
- Cat Grade with 3D single GNSS
- Cat Grade with 3D dual GNSS
-
- Electrical System
-
- 360° lighting
-
- Engine
-
- -18°C (-0°F) cold start capability
- -25°C (-13°F) cold start capability
-
- Hydraulic System
-
- Boom and stick lowering check valves
-
- Safety And Security
-
- 360° visibility
- Swing alarm
- Inspection lighting
-
- Service And Maintenance
-
- Integrated vehicle health management
-
- Undercarriage And Structures
-
- 600 mm (24 in) triple grouser shoes
- 600 mm (24 in) rubber track shoes
- 700 mm (28 in) triple grouser shoes
- 3.05 mt (6,720 lb) counterweight
- 3.57 mt (7,870 lb) counterweight
315/316-Linkage, 4 Tine
- Weight
- 1325 lb
- Width
- 48 in
- Tine Spacing
- 14.8 in
P218 Secondary Pulverizer
- Cycle Time - Open
- 1.8 s
- Cycle Time - Close
- 1.2 s
- Crushing Force - Primary Cutter
- 351 Sh Ton
HM4015 Standard Forestry Mulcher
- Motor
- Variable Torque Hydraulic Piston Motor
- Overall Width
- 74 in
- Drive Method
- Poly Chain Belt
HM3013 Dedicated Bite Limiter Forestry Mulcher
- Motor
- Variable Torque Hydraulic Piston Motor
- Overall Width
- 65 in
- Drive Method
- Poly Chain Belt
H120 S Hydraulic Hammer
- Impact Energy Class
- 3500 ft·lbf
- Blows per Minute
- 350-620
- Maximum Operating Weight
- 4101 lb
H115 GC S Hammer
- Impact Energy Class
- 2212 ft-lb
- Blows per Minute
- 450-800
- Maximum Operating Weight
- 2928.2 lb
GSH520-600
- Capacity
- 0.75 yd³
- Maximum Lift Capacity
- 17637 lb
- Shell Type Options
- Semi-open, Closed
GSH520-750
- Capacity
- 1 yd³
- Maximum Lift Capacity
- 17637 lb
- Shell Type Options
- Semi-open, Closed
GSH420-600-S
- Capacity
- 0.75 yd³
- Maximum Lift Capacity
- 17637 lb
- Shell Type Options
- Semi-open
GSH420-750-S
- Capacity
- 1 yd³
- Maximum Lift Capacity
- 17637 lb
- Shell Type Options
- Semi-open
GSH520-500
- Capacity
- 0.65 yd³
- Maximum Lift Capacity
- 17637 lb
- Shell Type Options
- Semi-open, Closed
GSH420-500-S
- Capacity
- 0.65 yd³
- Maximum Lift Capacity
- 17637 lb
- Shell Type Options
- Semi-open
G314 Demolition & Sorting Grapple
- Grapple Area
- 0.49 yd³
- Weight
- 2337 lb
- Machine Class
- 12-18 Ton Excavators
S60 S Type Excavator Coupler: 573-3166
- Weight
- 388 lb
- Lifting Hook Capacity
- 5 ton (US)
- Width
- 13.39 in
S60 S Type Excavator Coupler: 573-3161
- Weight
- 384 lb
- Lifting Hook Capacity
- 5 ton (US)
- Width
- 13.39 in
S60 S Type Excavator Coupler: 573-3168
- Weight
- 324 lb
- Lifting Hook Capacity
- 5 ton (US)
- Width
- 13.39 in
Pin Grabber Coupler (315-Linkage): 455-3916
- Minimum Carrier Weight
- 15 ton (US)
- Maximum Carrier Weight
- 18 ton (US)
- Weight
- 659 lb
Pin Grabber Coupler (315-Linkage): 391-4347
- Minimum Carrier Weight
- 15 ton (US)
- Maximum Carrier Weight
- 18 ton (US)
- Weight
- 659 lb
Hydraulic Connecting S Type Coupler HCS65: 583-0661
- Machine Class
- 14-20
- Height
- 16.1 in
- Maximum Operating Pressure
- 5076 psi
Hydraulic Connecting S Type Coupler HCS65: 590-2380
- Machine Class
- 14-20
- Height
- 15.2 in
- Maximum Operating Pressure
- 5076 psi
Hydraulic Connecting S Type Coupler HCS60: 590-2376
- Machine Class
- 12-19
- Height
- 15.4 in
- Weight
- 331 lb
Hydraulic Connecting S Type Coupler HCS60: 590-2377
- Machine Class
- 12-19
- Weight
- 390 lb
- Height
- 16.5 in
Severe Duty Bucket 1050 mm (42 in)
- Width
- 42 in
- Capacity
- 1 yd³
- Weight
- 1506 lb
Severe Duty Bucket 1050 mm (42 in)
- Width
- 42 in
- Capacity
- 1 yd³
- Weight
- 1506 lb
General Duty Bucket 1200 mm (48 in)
- Width
- 48 in
- Capacity
- 1.19 yd³
- Weight
- 1444 lb
General Duty Bucket 1050 mm (42 in)
- Width
- 42 in
- Capacity
- 1 yd³
- Weight
- 1307 lb
General Duty Bucket 900 mm (36 in)
- Width
- 36 in
- Capacity
- 0.81 yd³
- Weight
- 1202 lb
General Duty-Pin Grabber Performance Bucket 900 mm (36 in)
- Width
- 36 in
- Capacity
- 0.75 yd³
- Weight
- 1197 lb
General Duty Bucket 750 mm (30 in)
- Width
- 30 in
- Capacity
- 0.64 yd³
- Weight
- 1074 lb
General Duty Bucket 600 mm (24 in)
- Width
- 24 in
- Capacity
- 0.46 yd³
- Weight
- 955 lb
General Duty Bucket 600 mm (24 in)
- Width
- 24 in
- Capacity
- 0.43 yd³
- Weight
- 915 lb
Cat® Seat Belt Reminder
Cat® Detect with Smart Camera
Cat® Detect with Surround Cameras
Cat® Detect with Rear Camera
S3015 Rotating Scrap & Demolition Shear
- Weight - Boom Mount
- 3331 lb
- Weight - Stick Mount
- 3234 lb
- Length
- 105 in