Buy Parts View Specs Locations Contact Us Careers Email Signup

Drills

MD6310 Rotary Blasthole Drill 13.7 m or 17.5 m (44.9 ft or 57.4 ft) Mast Configuration

Bit Load Up to 42 149 kg (Up to 92,922 lb)
Hole Diameter 203-311 mm (8-12.25 in)
Engine C32® @ 1,800 rpm
13.7 m (44.9 ft) Mast: Hole diameter range 203-279 mm (8-11 in)

Specifications

Bit Load
Up to 42 149 kg (Up to 92,922 lb)
Hole Diameter
203-311 mm (8-12.25 in)
Engine
C32® @ 1,800 rpm

Basic Specs

13.7 m (44.9 ft) Mast: Hole diameter range
203-279 mm (8-11 in)
13.7 m (44.9 ft) Mast: Hole diameter range 203-279 mm (8-11 in) – Single pass depth
44.9ft
13.7 m (44.9 ft) Mast: Hole diameter range 203-279 mm (8-11 in) – Multi pass depth
Down to 62.5 m (Down to 205 ft)
13.7 m (44.9 ft) Mast: Pull-down capacity
Up to 289.13 kN (Up to 65,000 lb)
13.7 m (44.9 ft) Mast: Hoist capacity
Up to 289.13 kN (Up to 65,000 lb)
13.7 m (44.9 ft) Mast: Hoist speed
146.8ft/min
13.7 m (44.9 ft) Mast: Bit load (single pass)
Up to 31 640 kg (Up to 69,755 lb)
17.5 m (57.4 ft) Mast: Hole diameter range
203-311 mm (8-12.25 in)
17.5 m (57.4 ft) Mast: Hole diameter range 203-311 mm (8-12.25 in) – Single pass depth
57.4ft
Angle Drilling
Vertical to 30° (in 5° increments)
Compressor - DTH Drilling
42.2 m³/min (1,500 ft³/min) @ 34.4 bar (500 psi)
17.5 m (57.4 ft) Mast: Pull-down capacity
Up to 382.5 kN (Up to 86,000 lb)
17.5 m (57.4 ft) Mast: Hoist capacity
Up to 382.5 kN (Up to 86,000 lb)
17.5 m (57.4 ft) Mast: Hoist speed
122.7ft/min
17.5 m (57.4 ft) Mast: Bit load (single pass)
Up to 42 149 kg (Up to 92,922 lb)
Emissions: U.S. EPA Tier 4 Final – Engine
C32 @ 1,800 rpm
Emissions: U.S. EPA Tier 4 Final – Rated horsepower SAE J1995
1018hp
Emissions: U.S. EPA Tier 4 Final – Rated horsepower ISO 14396
1008hp
Emissions: Equivalent to Tier 2 – Engine
C32 @ 1,800 rpm
Emissions: Equivalent to Tier 2 – Rated horsepower SAE J1995
1032hp
Emissions: Equivalent to Tier 2 – Rated horsepower ISO 14396
1025hp
Compressor: Rotary drilling
56.6 m³/min (2,000 ft3/min) @ 8.6 bar (125 psi)
Compressor: Rotary drilling
73.6 m³/min (2,600 ft3/min) @ 7.6 bar (110 psi)
Compressor: DTH drilling
42.2 m³/min (1,500 ft3/min) @ 34.4 bar (500 psi)
Elevation capable: Tier 2 Equivalent engine
15000ft
Elevation capable: Tier 4 Final engine
12000ft
Angle drilling
30° (in 5° increments)
13.7 m (44.9 ft) Mast - Bit Load - Single Pass
Up to 41 165 kg (Up to 90,753 lb)
13.7 m (44.9 ft) Mast - Hoist Capacity
Up to 29 484 kg (Up to 65,000 lb)
13.7 m (44.9 ft) Mast - Hoist Speed
122.7ft/min
13.7 m (44.9 ft) Mast - Hole Diameter Range
203-311 mm (8-12.25 in)
13.7 m (44.9 ft) Mast - Hole Diameter Range 203-279 mm (8-11 in) - Multi Pass Depth
Down to 62.5 m (Down to 205 ft)
13.7 m (44.9 ft) Mast - Hole Diameter Range 203-279 mm (8-11 in) - Single Pass Depth
44.9ft
13.7 m (44.9 ft) Mast - Pulldown Capacity
Up to 39 009 kg (Up to 86,000 lb)
17.5 m (57.4 ft) Mast - Bit Load - Single Pass
Up to 42 149 kg (Up to 92,922 lb)
17.5 m (57.4 ft) Mast - Hoist Capacity
Up to 29 484 kg (Up to 65,000 lb)
17.5 m (57.4 ft) Mast - Hoist Speed
122.7ft/min
17.5 m (57.4 ft) Mast - Hole Diameter Range
203-311 mm (8-12.25 in)
17.5 m (57.4 ft) Mast - Hole Diameter Range 203-311 mm (8-12.25 in) - Multi Pass Depth
Down to 47.9 m (Down to 157.4 ft)
17.5 m (57.4 ft) Mast - Hole Diameter Range 203-311 mm (8-12.25 in) - Single Pass Depth
57.4ft
17.5 m (57.4 ft) Mast - Pulldown Capacity
Up to 39 009 kg (Up to 86,000 lb)
Compressor - Rotary Drilling (1)
56.6 m³/min (2,000 ft³/min) @ 8.6 bar (125 psi)
Compressor - Rotary Drilling (2)
73.6 m³/min (2,600 ft³/min) @ 7.6 bar (110 psi)
Elevation Capable - Tier 2 Equivalent Engine
15000ft
Elevation Capable - Tier 4 Final Engine
12000ft
Emissions (Equivalent to Tier 2): Engine
C32 @ 1,800 rpm
Emissions (Equivalent to Tier 2): Rated Horsepower - ISO 14396
1025mm H2O
Emissions (Equivalent to Tier 2): Rated Horsepower - SAE J1995
1032mm H2O
Emissions (U.S. EPA Tier 4 Final): Engine
C32 @ 1,800 rpm
Emissions (U.S. EPA Tier 4 Final): Rated Horsepower - ISO 14396
1008mm H2O
Emissions (U.S. EPA Tier 4 Final): Rated Horsepower - SAE J1995
1018mm H2O
13.7 m (44.9 ft) Mast - Hole Diameter Range 203-311 mm (8-12.25 in) - Multi Pass Depth
Down to 74.6 m (Down to 244.9 ft)
Emissions (U.S. EPA Tier 4 Final): Power Rating ISO 14396
1007HP
13.7 m (44.9 ft) Mast - Hole Diameter Range 203-311 mm (8-12.25 in) - Single Pass Depth
44.9ft
Emissions (Equivalent to Tier 2): Power Rating ISO 14396
1031HP

Cooling

Components (1)
Coolers with easy cleaning access
Components (2)
Separate engine cooling module
Components (3)
Replaceable cooler core sections
Features
Functional in ambient temperature of 52° C (125° F)
Components (4)
Automatic variable speed fan control
Components (5)
Automatic variable speed fan control

Hydraulics

Components (1)
Two (2) primary pumps – 210 cc (piston, with proportional electronic controls)
Components (2)
One (1) auxiliary circuit pump – 110 cc (piston, load sensing)
Components (3)
Two (2) fan pumps – 1,000 cc (piston, with proportional electronic controls)
Components (5)
Scheduled Oil Sampling (S∙O∙S) ports
Components (4)
Two (2) charge pumps – 43.9 + 56.5 cc (double stack gear, fixed displacement)

Climate Choices

Climate Level 1 standard fluids and lubricants
–1° C (30° F) temperatures
Climate Level 1 standard fluids and lubricants
Withstands high heat to 52° C (125° F)
Climate Level 1 Standard Fluids and Lubricants (2)
Withstands high heat to 52° C (125° F)
Climate Level 4 Arctic Fluids and Lubricants (1)
–40° C (–40° F) temperatures
Climate Level 4 Arctic Fluids and Lubricants (2)
Engine coolant and water tank heater, battery trays and provision for fuel heating – diesel fired
Climate Level 4 Arctic Fluids and Lubricants (4)
Arctic fluids, Genset ready, heaters and blankets for tanks, extra batteries, heated water suction lines
Climate Level 4 Arctic Fluids and Lubricants (5)
Shore power connection box with switchable 240-600 volt, 50 amp waterproof connection
Climate Level 4 Arctic fluids and lubricants
Arctic fluids, Genset ready, heaters and blankets for tanks, extra batteries, heated water suction lines
Climate Level 4 Arctic fluids and lubricants
Shore power connection box with switchable 240-600 volt, 50 amp waterproof connection
Climate Level 1 Standard Fluids and Lubricants (1)
Rated down to –1° C (30° F) temperatures
Climate Level 2 Arctic Fluids and Lubricants (1)
–18° C (–0.4° F) temperatures
Climate Level 2 Arctic Fluids and Lubricants (2)
Extra batteries
Climate Level 4 Arctic Fluids and Lubricants (3)
50 Hz, High or Low Pressure Compressor, Tier 4 Final engine
Climate Level 2 Arctic Fluids and Lubricants
Rated down to –18° C (–0.4° F) temperatures
Climate Level 4 Arctic Fluids and Lubricants, Heating Package (6)
Breaker panel includes five (5) additional breakers for locally supplied heating elements, if needed
Climate Level 4 Arctic Fluids and Lubricants, Heating Package (3)
Full arctic lubricant package includes: engine oil, compressor oil and hydraulic oil
Climate Level 4 Arctic Fluids and Lubricants, Heating Package (1)
Rated down to –40° C (–40° F) temperatures
Climate Level 4 Arctic Fluids and Lubricants, Heating Package (5)
Shore power connection box with switchable 240-600V (50 amp) connection; diesel genset and or plug, sold separately
Climate Level 4 Arctic Fluids and Lubricants, Heating Package (2)
Diesel fired heating system that heats and circulates engine coolant through the: engine block, primary water tank, heating elements for battery trays with a provision for fuel tanks
Climate Level 4 Arctic Fluids and Lubricants, Heating Package (4)
Electric heating package with breaker panel to power: 120V heating blanket for compressor receiver tank, compressor control box, heat trace for compressor control lines, heat trace for housing from water tank to water pump and water fast-fill assembly plu

Engine Choices

U.S. EPA Tier 2 Equivalent - Engine
C32 @ 1,800 rpm
U.S. EPA Tier 4 Final: Rated horsepower SAE J1995
1018hp
U.S. EPA Tier 4 Final: Rated horsepower ISO 14396
1008hp
U.S. EPA Tier 4 Final - Engine
C32 @ 1,800 rpm
U.S. EPA Tier 2 Equivalent: Rated horsepower SAE J1995
1032hp
U.S. EPA Tier 2 Equivalent: Rated horsepower ISO 14396
1025hp
Components (1)
Dual starter motors
Components
Scheduled oil sampling (S∙O∙SSM) ports
Components (2)
Scheduled oil sampling (S∙O∙SSM) ports
Components (3)
Common air intake filters provide +500 hour service interval in normal operating conditions
Components (4)
Ether starting aid; ether bottle supplied locally
U.S. EPA Tier 2 Equivalent - Rated Horsepower - ISO 14396
1025mm H2O
U.S. EPA Tier 2 Equivalent - Rated Horsepower - SAE J1995
1032mm H2O
U.S. EPA Tier 4 Final - Rated Horse Power - ISO 14396
1008mm H2O
U.S. EPA Tier 4 Final - Rated Horse Power - SAE J1995
1018mm H2O

Compressor/Receiver Choices

Note
With the compressors variable volume control, the operator can limit air output and engine speed both resulting in reduced fuel consumption. All of these compressors contain this feature.
Choice
Compressor control box enclosure with air purged lines
DTH drilling includes tool lubrication and hammer storage
42.2 m3/min (1,500 ft3/min) @ 34.4 bar (500 psi) with High Pressure Receiver Tank for ASME/CRN/AU or CE Tank; hammer storage and tool oiler
Rotary drilling
56.6 m3/min (2,000 ft3/min) @ 8.6 bar (125 psi); with Low Pressure Receiver Tank for ASME/CRN/AU or CE Tank
Rotary drilling
73.6 m3/min (2,600 ft3/min) @ 7.6 bar (110 psi) with Low Pressure Receiver Tank for ASME/CRN/AU or CE Tank
Choice
Electronic compressor control and regulation with purged air lines
DTH Drilling - Includes Tool Lubrication and Hammer Storage
42.2 m³/min (1,500 ft³/min) @ 34.4 bar (500 psi)
Note
With the compressors variable volume control, the operator can limit air output resulting in reduced fuel consumption
– Both high and low pressure compressors contain this feature
Rotary Drilling (1)
56.6 m³/min (2,000 ft³/min) @ 8.6 bar (125 psi)
Rotary Drilling (2)
73.6 m³/min (2,600 ft³/min) @ 7.6 bar (110 psi)
Receiver Tank Choice (1)
Low pressure 8.6 bar (125 psi) for ASME/CR N/AU or CE
Receiver Tank Choice (2)
High pressure 34.4 bar (500 psi) for ASME/CR N/AU or CE

Regulatory Compliance

Features (1)
CE compliant
Features (2)
CSA certifiable
Features (3)
EAEU certifiable
Features (4)
CSA certified
Features (5)
MDG15 and MDG41 aligned

Frame and Work Deck

Features (1)
Jacks, mast pivot and deck are welded integrally to mainframe for maximum durability and long life
Components (1)
Stationary rear deck; for vertical and angle drilling
Components (2)
Four leveling jacks to provide leveling on a 7° bench (any orientation)
Features (2)
Slip resistant surface
Features (3)
Fuel tank capacity 1609 L (425 gal)
Features (4)
Fuel capacity expansion for additional +1609 L (425 gal)
Features (5)
Bolt-on platform for cold weather generator or fire suppression bottles (option)
Components (3)
Manual, centralized, lubrication banks for all pivot points on drill, or automated lubrication system (option)
Components (4)
Heavy duty tow hooks (front end)
Components (5)
Four (4) lift lugs, for use with cables or chains
Features (6)
Three egress points on deck areas in addition to main access
Components (6)
Walkway around cab to drill deck (option)
Components (7)
Bit storage box in-deck with hinged cover (option)
Components (8)
DTH hammer storage on drill deck with high pressure configuration (option)
Features
Three egress points on deck areas in addition to main access
Components (9)
Hydraulically operated viewing hatch in drill deck with spotlight (option)
Components (10)
Drill pipe thread greaser with remote fill tank or disposable grease bucket (option)
Components (11)
DTH Hammer storage on drill deck with high pressure configuration (option)
Components (12)
Hydraulically operated viewing hatch in drill deck with spotlight (option)
Components (13)
Drill pipe thread greaser with remote fill tank or disposable grease bucket
Features (7)
Sturdy guardrails, toe guards, self closing gates

Frame Access Choices

Choice (1)
Fixed access ladder to the cab area
Choice (2)
Cascading, hydraulic stairs to cab area (option) – includes jack and tram interlock that activates when the stairs are down
Choice (3)
Cab perimeter walkway available with either choice

Undercarriage

Model
Cat® 349E EL Excavator type
Ground clearance
19.3in
Drawbar Pull
122971lbf
Travel speed – via a sensor with in-cab display
1.5mph
Triple grousers for hard rock
23.6in
Triple grousers for soft rock
29.5in
Drawbar Pull
560,000 N
Ground Clearance
19.3in
Travel Speed - Via a Sensor with In-Cab Display
1.5mile/h
Triple Grousers for Hard Rock
23.6in
Triple Grousers for Soft Rock
29.5in
Track chain guards and guides
Level two
Travel Speed
1.5mile/h
Lower rollers
Thirteen (13)
Carrier Rollers
Three (3)
Triple grousers for hard rock ground bearing pressure 1.59 bar (23.1 psi)
23.6in
Triple grousers for soft rock ground bearing pressure 1.28 bar (18.5 psi)
29.5in

Mast

Note
Hydraulic, indexing pipe carousels accept various pipe diameters
Note
Configuration choices include single pass, multi pass, vertical or angle drilling
Features
13.7 m (44.9 ft) or 17.5 m (57.4 ft) Mast complete with pipe carousel
Features
Pulldown/hoist system is a single cylinder
Features
Auto tensioning of pull down and hoist cables
Features
Feed system accommodates multiple pipe diameters
Features
Base plate bushing diameters accommodate bits 235 mm (9.625 in) to 311 mm (12.25 in)
Features
Hydraulic break out wrenches (HOBO) available with adjustable grip ranges
Features
Deck wrench fits flats of corresponding drill pipe diameters and DTH hammer
Features
Configured with roller deck bushing for tricone applications, two-piece deck bushing for DTH
Features
Angle drilling 0-30°; in 5° increments (option)
Features
Drill pipe positioner with pipe diameter specific inserts
Features
Thread greaser with reloadable tank or disposable grease bucket (option)
Features
Overhead winch with remote; variable speed drive with ≥ 1818 kg (4,000 lb) rating, length to reach 6 m (20 ft) past drill deck (option)
Features
Mast lanyard mounting provisions (option)
Features (14)
Mast lanyard mounting provisions (option)
Features (15)
Mast access ladder and grating (option)
Features (16)
Tool oiler 113 L (30 gal) oil injection system (Rotary drilling only)
Features (17)
Mast access ladder and grating (option)
Features (1)
13.7 m (44.9 ft) or 17.5 m (57.4 ft) Mast configurations complete with pipe rack carousel
Features (10)
Overhead winch with remote; variable speed drive with ≥ 1818 kg (4,000 lb) rating, length to reach 6.1 m (20 ft) past drill deck (option)
Features (11)
Rotation Gear Box with dual motor arrangement, up to 160 rpm, and 16,000 N∙m of torque (11,800 ft-lb)
Features (12)
Pipe catcher; manual or optional hydraulically actuated
Features (13)
Tool oiler 113.5 L (30 gal) oil injection system (Rotary drilling only)
Features (2)
Pulldown/hoist system is a single cylinder
Features (3)
Auto tensioning of pull down and hoist cables
Features (4)
Feed system accommodates multiple pipe diameters
Features (5)
Variable grip hydraulic break out wrench (HOBO) for range of pipe diameters
Features (6)
Sliding deck wrench assembly
Features (7)
Configured with roller deck bushing for tricone applications, two-piece deck bushing for DTH
Features (8)
Angle drilling 0-30°; in 5° increments
Features (9)
Drill pipe positioner
Note (1)
Hydraulic, indexing pipe carousels accept various pipe diameters
Note (2)
Configuration choices include single pass, multi pass, vertical out to 30 degree angle drilling

Mast Packages: Standard or Premium Choices

13.7 m (44.9 ft) Mast: Single pass depth
44.9ft
13.7 m (44.9 ft) Mast: Multi pass depth
Down to 62.5 m (Down to 205 ft)
13.7 m (44.9 ft) Mast: Pulldown – rated single cylinder pull-down/hoist system
Up to 289.13 kN (Up to 65,000 lb)
13.7 m (44.9 ft) Mast: Hoist
Up to 289.13 kN (Up to 65,000 lb)
17.5 m (57.4 ft) Mast: Single pass depth
57.4ft
17.5 m (57.4 ft) Mast: Multi pass depth
Up to 48 m (Up to 157.5 ft)
17.5 m (57.4 ft) Mast: Pulldown – rated single cylinder pull-down/hoist system
Up to 382.5 kN (Up to 86,000 lb)
17.5 m (57.4 ft) Mast: Hoist – pull-down/hoist
Up to 382.5 kN (Up to 86,000 lb)

Mast Packages - Standard or Premium Choices

13.7 m (44.9 ft) Mast - Mast Accessories Manual
One wire rope pipe catcher, hydraulically actuated pipe positioner, manual bit basket
13.7 m (44.9 ft) Mast - Mast Accessories Hydraulic
One hydraulic pipe catcher, hydraulically actuated pipe positioner, hydraulic bit basket
17.5 m (57.4 ft) Mast - Mast Accessories Manual
Two wire rope (17.5 m/57.4 ft) pipe catchers, hydraulically actuated pipe positioner, manual bit basket
17.5 m (57.4 ft) Mast - Mast Accessories Hydraulic
One hydraulic pipe catcher, plus one wire rope, hydraulically actuated pipe positioner, hydraulic bit basket
Angle Drilling
Available with either mast
13.7 m (44.9 ft) Mast - Hoist
Up to 289.13 kN (Up to 65,000 lb)
13.7 m (44.9 ft) Mast - Multi Pass Depth
Down to 62.5 m (Down to 205 ft)
13.7 m (44.9 ft) Mast - Pulldown - Rated Single Cylinder Pulldown/Hoist System
Up to 289.13 kN (Up to 65,000 lb)
13.7 m (44.9 ft) Mast - Single Pass Depth
44.9ft
17.5 m (57.4 ft) Mast - Hoist - Pulldown/Hoist
Up to 382.5 kN (Up to 86,000 lb)
17.5 m (57.4 ft) Mast - Multi Pass Depth
Up to 48 m (Up to 157.5 ft)
17.5 m (57.4 ft) Mast - Pulldown - Rated Single Cylinder Pulldown/Hoist System
Up to 382.5 kN (Up to 86,000 lb)
17.5 m (57.4 ft) Mast - Single Pass Depth
57.4ft

Carousel and Pipe (Mast size dependent)

13.7 m (44.9 ft) Mast Carousel; takes quantity of 4 × 12.19 m (40 ft) pipes; total depth 62.5 m (205 ft): Pipe diameters
178 mm (7 in), 193 mm (7.625 in), 203 mm (8 in), 219 mm (8.625 in)
17.5 m (57.4 ft) Mast Carousel; takes quantity of 4 × 7.6 m (25 ft) pipes; total depth 48 m (157.5 ft): Pipe diameters
178 mm (7 in), 193 mm (7.625 in), 203 mm (8 in), 219 mm (8.625 in)
17.5 m (57.4 ft) Mast Carousel; takes quantity of 2 × 7.6 m (25 ft) pipes; total depth 32.7 m (107.4 ft): Pipe diameters
9.25in

Tool Package Rotary

Components (1)
Roller deck bushing
Components (2)
Pipe positioner inserts
Components (3)
Deck wrench, sliding
Components (4)
Top Sub, or Shock sub and cross over adapter (option)
Components (5)
Bit sub
Components (6)
Pipe wiper seal

Tool Package DTH

Components (1)
Two piece bushing
Components (2)
Pipe positioner inserts
Components (3)
Deck wrench, sliding
Components (4)
Shock sub and top sub adapter
Components (5)
Cross over hammer adapter
Components
Pipe wiper seal
Components (6)
Pipe wiper seal

Overhead Winch System

Capacity rating
4000lb
Cable diameter
0.5in
Winch reach – past the drill deck
20ft
Note
Variable speed control
Cable Diameter
0.5in
Capacity Rating
4000lb
Winch Reach - Past the Drill Deck
20ft

Rotary Head Top Drive System

Components
Spindle with 168 mm (6.625 in) API regular thread with splined collar
Components
Rotation gear box with dual motor, up to 160 rpm, and 16 000 N∙m (11,800 lbf-ft) of torque
Components
Rotary torque control
Components (4)
Virtual rotary head travel stops and interlocks
Components (1)
Spindle with 168 mm (6.625 in) API regular thread and splined collar
Components (2)
Rotation gear box with dual motor arrangement, up to 160 rpm, and 16 000 N∙m (11,800 lbf-ft) of torque
Components (3)
Rotary torque control

Operator Environment

Cab, Standard

– Fabric seat
– Single pane window glass
– Windshield wiper for driller window
– Window shade (option)
– Foldaway trainer’s seat (option)
Cab, Premium

– Leather seat with heat and ventilation
– Dual pane window glass
– Front window guard
– Removable floor mat
– Foot rest
– Wrist rests
– Additional in-cab storage box
– Additional windshield wipers on front and rear windows
– W
Components
Spacious FOPS cab has 3 m2 (32.4 ft2) floor space with an integrated operator station
Components
Cab rubber shock-mounts absorb mechanical vibration and restrict exterior noise
Lighting
– LED interior lights; separate reading light, and backlit joysticks and keypads
– Zone controls for area lights and spot lighting for night drilling
– Flood lights for the drill perimeter
– Spot lights for power group area; drill deck; mast caro
HVAC
– Floor vents in the foot rest area
– Roof-mounted air conditioner/heating/pressurizing unit
– Filter access from deck, does not require roof access, and has approximately 500 hour service interval
– Defogging HVAC vents on driller window
Cameras
– Mounted on the front and left sides to provide 360° view from operator's seat
– Camera on the mast to view pipe carousel/top drive operation
Components (6)
Two swing-out hinged doors with windows and Cat keyed locks
Components (7)
Operator station design integrates an ergonomic seat, armchair joystick controls with full instrumentation, and two 254 mm (10 in) color, high definition touchscreens and 12 volt power port
Components (8)
Additional display screen for cc cameras; color, high-definition 254 mm (10 in)
Components (9)
Power convertor 24V to 12V
Components (10)
Radio-ready for communication and entertainment radio
Components (11)
Cab roof access ladder (option)
Components (12)
Literature holder
Lighting:

– LED interior lights; separate reading light, and backlit joysticks and keypads
– Zone controls for area light and spot lighting for night drilling
– Flood lights for the drill perimeter
– Spot lights for power group area; drill deck; mast c
HVAC:

– Floor vents in the foot rest area
– Roof-mounted air conditioner/heating/pressurizing unit
– Filter access from deck, does not require roof access, and has approximately 500 hour service interval
– Defogging HVAC vents on driller window
Cameras:

– Mounted on the front and left sides to provide 360° view from operator’s seat
– Camera on the mast to view pipe carousel/top drive operation
Cab - Premium
– Leather seat with heat and ventilation
– Dual pane window glass
– Front window guard
– Additional in-cab storage box
– Additional windshield wipers on front and rear windows
– Window shades (option)
– Foldaway trainer’s seat (option)
Cab - Standard
– Fabric seat
– Single pane window glass
– Windshield wiper for driller window
– Window shades (option)
– Foldaway trainer’s seat (option)
– Removable floor mat
Components (1)
Spacious FOPS cab has 3 m² (32.4 ft²) floor space with an integrated operator station
Components (2)
Extended cab option 4.2 m² (45.2 ft²); prewired and dedicated space for refrigerator and microwave
Components (3)
Cab perimeter walkway available for both cab sizes
Components (4)
Drill performance touchscreen display
Components (5)
Cab rubber shock-mounts absorb mechanical vibration and restrict exterior noise
Components (13)
Seat swivels, locks and has two point/76 mm (3 in) seat belt, tilts (5° adjustment), lumbar support, fore/aft seat adjustment 80 mm (3.1 in)
Components (14)
Trainer’s seat that folds away and has retractable seat belt (optional)

Drill Pipe

7.62 m (25 ft) pipes - pipe rack carousel holds a quantity of four or five pipes, 17.5 m (57.4 ft) Mast: Rotary
9.25in
12.1 m (40 ft) Pipes - Requires Quantity of Four, 13.7 m (44.9 ft) Mast: DTH
7in
12.1 m (40 ft) Pipes - Requires Quantity of Four, 13.7 m (44.9 ft) Mast: Rotary or DTH
7.625in
12.1 m (40 ft) Pipes - Requires Quantity of Four, 13.7 m (44.9 ft) Mast: Rotary (1)
8in
12.1 m (40 ft) Pipes - Requires Quantity of Four, 13.7 m (44.9 ft) Mast: Rotary (2)
8.625in
7.62 m (25 ft) Pipes - 17.5 m (57.4 ft) Mast - Requires Quantity of Four (4): DTH
7in
7.62 m (25 ft) Pipes - 17.5 m (57.4 ft) Mast - Requires Quantity of Four (4): Rotary/DTH
7.625in
7.62 m (25 ft) Pipes - 17.5 m (57.4 ft) Mast - Requires Quantity of Four (4): Rotary (1)
8in
7.62 m (25 ft) Pipes - 17.5 m (57.4 ft) Mast - Requires Quantity of Four (4): Rotary (2)
8.625in
7.62 m (25 ft) Pipes - 17.5 m (57.4 ft) Mast - Requires Quantity of Only Two: Rotary
9.25in
7.62 m (25 ft) pipes - pipe rack carousel holds a quantity of four or five pipes, 17.5 m (57.4 ft) Mast: Rotary or DTH
7.625in
7.62 m (25 ft) pipes - pipe rack carousel holds a quantity of four or five pipes, 17.5 m (57.4 ft) Mast: DTH
7in
7.62 m (25 ft) pipes - pipe rack carousel holds a quantity of four or five pipes, 17.5 m (57.4 ft) Mast: Rotary (1)
8in
7.62 m (25 ft) pipes - pipe rack carousel holds a quantity of four or five pipes, 17.5 m (57.4 ft) Mast: Rotary (2)
8.625in
12.19 m (40 ft) pipes - pipe rack carousel holds a quantity of four (4) or five (5) pipes, 13.7 m (44.9 ft) Mast: Rotary (2)
8.625in
12.19 m (40 ft) pipes - pipe rack carousel holds a quantity of four (4) or five (5) pipes, 13.7 m (44.9 ft) Mast: Rotary (1)
8in
12.19 m (40 ft) pipes - pipe rack carousel holds a quantity of four (4) or five (5) pipes, 13.7 m (44.9 ft) Mast: DTH
7in
12.19 m (40 ft) pipes - pipe rack carousel holds a quantity of four (4) or five (5) pipes, 13.7 m (44.9 ft) Mast: Rotary or DTH
7.625in
Note
Dual purpose carousel pipe: 13.7 m (44.9 ft) Mast; holds quantity of two (2) 12.19 m (40 ft) pipes and quantity of two (2) 9.14 m (30 ft) pipes, and adapters to connect to DTH hammer and tricone bit (DTH hammer and tricone not included)
  • Dual purpos

Mast Packages

Angle Drilling
Included with either mast
Mast Accessories Hydraulic (2)
One hydraulic pipe catcher, plus one wire rope, hydraulically actuated pipe positioner, hydraulic bit basket
Mast Accessories Hydraulic (1)
One hydraulic pipe catcher, hydraulically actuated pipe positioner, hydraulic bit basket
Mast Accessories Manual, 17.5 m (57.4 ft) Mast
Two wire rope pipe catchers, hydraulically actuated pipe positioner, manual bit basket
Mast Accessories Manual, 13.7 m (44.9 ft) Mast
One wire rope pipe catcher, hydraulically actuated pipe positioner, manual bit basket

Operating System Controls - Standard

Components (1)
All electric controls for drilling, tramming, leveling plus auxiliary functions
Components (2)
Electronic compressor control
Components (3)
Rotation torque control
Components (4)
Virtual rotary head travel stops and interlocks
Components (5)
Pipe positioner engaged/disengaged indicator
Components (6)
Drill depth meter
Components (7)
Drill performance and display system
Components (8)
Delayed engine shut down
Components (9)
Rotary head rpm gauge – (digital display in screen)
Components (10)
Filter indicators for hydraulic, compressor and engine
Components (11)
Jack pressure sensors in the display
Components (12)
Dust suppression control
Components (13)
Mast lock indicator
Components (14)
ECM controlled proportional fan speed control system
Components (15)
Tram interlock, machine stability limits
Components (16)
Tram interlock, pipe in hole
Components (17)
Tram interlock, mast up and locked or down and parked
Components (18)
Tram interlock, jacks retracted
Components (19)
Cab environment controls (AC, filter, heat, fan speeds)
Components (20)
Cabin pressure manometer with indicator (option)
Components (21)
Dust curtain lifting system – auto hydraulic raise front and rear (option)
Components (22)
Prewired for Terrain and autonomous operation
Components (23)
Data logging of machine health with warnings, and fault code records; export capability
Components (24)
ECM interlock for the jacks, raises curtains when jacks are lifted
Components (25)
Wiring for Terrain interface
Components (26)
Pre-wired for Terrain and autonomous operation
Components (27)
Zone control for area lighting and spotlighting during dark conditions
Components (28)
Data logging of machine health with warnings, and fault code records; export capability

Automation and Technology

Components
Drill depth indicator and interlocks
Components (1)
Drill depth indicator and interlocks
Components (2)
Auto level, auto retract, auto mast
Components
Product Link Elite (option)
Type
Autonomy ready
Components (5)
Optional Command for Drilling enables each operator to manage more than one machine
Cat Terrain for Drilling - Mining System Interface

– Production
– Navigation
Components (6)
Wiring for third party interface
Components (3)
Drill assist (single or multipass auto drill) (options)
Components (4)
Product Link Elite (hardware from factory, subscription package via dealer)
Optional Cat Terrain for Drills - Mining System Interface
– Production
– Navigation

Dust Suppression Choices

Choices
Dust curtain hydraulic lifters raise front and rear dust curtains (recommended with dust collector)
Choices
Tram off spray to wet the ground around the cutting pile (not recommended for cold weather applications)
Water injection (standard)
– Water tank capacity 1514 L (400 gal)
Water injection and dust collector (option)
– Water tank capacity 1514 L (400 gal)
– 204 m3/min (7,200 cfm) Dry dust collector box
– Self-cleaning filters, dust chute with clean-out door
High Volume Water Injection system (Not compatible with basic service package)
– Water tanks total capacity 3785 L (1,000 gal) maximum
– Primary tank above deck – 1514 L (400 gal) capacity (heated for extreme cold weather)
– Secondary tank above deck – 2271 L (600 gal) capacity deck
Choices
Static dust curtains, four sides boxed in (standard)
Choices
Hydraulic lifters for front and rear dust curtains (optional)
Choices
Low water level indicator
Choices (1)
Dust curtain hydraulic lifters raise front and rear dust curtains (option) (recommended with dust collector)
Choices (2)
Tram off spray to wet the ground around the cuttings pile (not recommended for cold weather applications)
Choices (3)
Static dust curtains, four sides boxed in (standard)
Choices (4)
Hydraulic lifters for front and rear dust curtains (optional)
Choices (5)
Low water level indicator
High Volume Water Injection System - Not Compatible with Basic Service Package
– Water tanks total capacity 3785 L (1,000 gal) maximum
– Primary tank above deck – 1514 L (400 gal) capacity (heated for extreme cold weather)
– Secondary tank above deck – 2271 L (600 gal) capacity deck
Water Injection - Standard
– Water tank capacity 1514 L (400 gal)
Water Injection and Dust Collector - Option
– Water tank capacity 1514 L (400 gal)
– 204 m3/min (7,200 cfm) Dry dust collector box
– Self-cleaning filters, dust chute with clean-out door
Water injection and dry dust collector (option)
– Water tank capacity 1514 L (400 gal)
– 204 m³/min (7,200 cfm) dry dust collector
– Self-cleaning filters, with auto-eject dust chute

Safety and Security

Feature
Approach angle of 14 degrees facilitates loading and unloading on a lowboy
Components (1)
Alloy drill deck covers, with storage provision
Components (2)
Seven (7) engine shut down buttons: in cab, at drill deck, on deck at power train, ground accessible by main access point and each side of the drill front and left
Components
Electric horn activated by push button in the cab
Components (3)
Electric horn activated by push button in the cab
Components
Hinged protective guard for full front drill window
Components
Guards for exhaust pipes and turbo lines
Components (4)
Tram alarm is automatic and audible
Components (5)
Hinged protective guard for full front drill window
Components (6)
Guards for exhaust pipes and turbo lines
Components (7)
Mast access ladder with mast grating (option)
Components (8)
Three egress points on deck areas in addition to main access
Components (9)
Self-closing, gates secure egress ladder locations
Components (10)
In-deck mounted battery box
Components (11)
Ground level keyed battery disconnect/starter lockout with remote jump start terminals
Components (12)
Air hose retention devices
Feature
Approach angle of 14 degrees facilitates loading and unloading on a lowboy

Service Packages

Package (1)
Basic/Manual – Centralized Manual Lube; Gravity Fill for fuel and water
Package (2)
Standard – Fast Fill for fuel and water; Automatic Lubrication System
Package (3)
Premium – Service center for lubricant drain and fill (compressor oil, hydraulic oil, gearbox oil, engine oil, tool lubrication and grease), Automatic Lubrication System, Fast Fill for fuel and water, blowdown hose

Dimensions (Approximate) – 13.7 m (44.9 ft) Mast

Width front
17.67ft
Width rear
20.75ft
Height mast up
65.5ft
Body length – standard cab
43.5ft
Body length – extended cab
45.25ft
Length mast down – standard cab
69.2ft
Length mast down – extended cab
70.93ft

Dimensions (Approximate) – 17.5 m (57.4 ft) Mast

Width front
17.67ft
Width rear
20.75ft
Height mast up
78ft

Access Choices

Choice (3)
Cab perimeter walkway available with either choice
Choice (1)
Access ladder from cab area on right side of frame
Choice (2)
Cascading, hydraulic self-leveling access stairs to cab area. Includes tram interlock for when the ladder is down. (option)

Weights - 17.5 m (57.4 ft) Mast

Working Weight Range - Minimum/Maximum
75 500/97 500 kg (166,449/214,950 lb)
Working Weight Range - Minimum
170900lb
Working Weight Range - Maximum
209450lb

Hydraulic Break Out Wrench

Variable Grip Hydraulic Break Out Wrench Grip Ranges (1)
178-219 mm (7.0-8.625 in)
Variable Grip Hydraulic Break Out Wrench Grip Ranges (2)
235 mm (9.25 in)

Service Tool Options

Option
Bushing Retention Tool 178 to 235 mm (7.00 to 9.25 in) pipe diameter
Lifting Bails (Available on Request; Required for Commissioning)
– 114 mm (4.5 in) API thread
– 140 mm (5.5 in) API thread
– 168 mm (6.625 in) for top sub/shock sub API thread
– 108 mm (4.25 in) for 178 mm (7 in) pipe BECO thread
– 152 mm (6 in) for 193 mm (7.625 in) up to 235 mm (9.25 in) pipe BECO thread
Lifting Bails (Available on Request)
– 114 mm (4.5 in) API reg thread
– 140 mm (5.5 in) API reg thread
– 168 mm (6.625 in) for top sub/shock sub API thread
– 114 mm (4.5 in) for 178 mm (7 in) pipe BECO thread
– 152 mm (6 in) for 194 mm (7.625 in) up to 235 mm (9.25 in) pipe BECO

Dimensions (Approximate) - 17.5 m (57.4 ft) Mast

Body Length - Standard Cab
43.54ft
Body Length - Extended Cab
42.24ft
Length - Mast Down - Standard Cab
81.69ft
Length - Mast Down - Extended Cab
83.33ft
Height - Mast Up
77.99ft
Width - Front
17.68ft
Width - Rear
20.73ft

Weights - 13.7 m (44.9 ft) Mast

Working Weight Range - Minimum
166450lb
Working Weight Range - Maximum
209450lb
Working Weight Range - Minimum/Maximum
75 800/97 000 kg (167,110/213,848 lb)

Carousel and Pipe - Mast Size Dependent

13.7 m (44.9 ft) Mast Carousel - Takes Quantity of 4 × 12.19 m (40 ft) Pipes; Total Depth 62.5 m (205 ft): Pipe Diameters
178 mm (7 in), 193 mm (7.625 in), 203 mm (8 in), 219 mm (8.625 in)
17.5 m (57.4 ft) Mast Carousel - Takes Quantity of 2 × 7.6 m (25 ft) Pipes; Total Depth 32.7 m (107.4 ft): Pipe Diameters
9.25in
17.5 m (57.4 ft) Mast Carousel - Takes Quantity of 4 × 7.6 m (25 ft) Pipes; Total Depth 48 m (157.5 ft): Pipe Diameters
178 mm (7 in), 193 mm (7.625 in), 203 mm (8 in), 219 mm (8.625 in)

Dimensions (Approximate) - 13.7 m (44.9 ft) Mast

Body Length - Extended Cab
42.24ft
Body Length - Standard Cab
43.54ft
Height - Mast Up
65.39ft
Length - Mast Down - Extended Cab
70.87ft
Length - Mast Down - Standard Cab
69.23ft
Width - Front
17.68ft
Width - Rear
20.74ft

Overhead Winch System (optional)

Cable Diameter
0.5in
Capacity Rating
4000lb
Note
Variable speed control
Winch Reach - Past The Drill Deck
20ft

Carousel (Mast size and pipe diameter dependent)

13.7 m (44.9 ft) Mast Carousel; holds quantity of 4 × 12.19 m (40 ft) pipes; total depth 62.5 m (204.9 ft): Pipe diameters
178 mm (7 in), 194 mm (7.625 in), 203 mm (8 in), 219 mm (8.625 in)
13.7 m (44.9 ft) Mast Carousel; holds quantity of 5 × 12.19 m (40 ft) pipes; total depth 74.6 m (244.9 ft): Pipe diameters
194 mm (7.625 in), 219 mm (8.625 in)
17.5 m (57.4 ft) Mast Carousel; holds quantity of 2 × 7.62 m (25 ft) pipes; total depth 32.7 m (107.4 ft): Pipe diameter
9.25in
17.5 m (57.4 ft) Mast Carousel; holds quantity of 4 × 7.62 m (25 ft) pipes; total depth 48 m (157.5 ft): Pipe diameters
178 mm (7 in), 194 mm (7.625 in), 203 mm (8 in), 219 mm (8.625 in)
Note
13.7 m (44.9 ft) Mast Carousel, dual purpose; holds quantity of two (2) 12.19 m (40 ft) pipes and quantity of two (2) 9.14 m (30 ft) pipes, and adapters to connect to DTH hammer and tricone bit (DTH hammer and tricone not included)
  • Accepts 194 mm (

Optional Equipment:

  • Frame
    • Fuel tank expansion of +1609 L (425 gal) for total of 3218 L (850 gal) (option) required for autonomy packages
  • Mast
    • Overhead winch with remote; variable speed drive with ≥ 1814 kg (4,000 lb) rating, length to reach 6.1 m (20 ft) past drill deck
    • Rotary tool lubrication, 113.5 L (30 gal) oil injection system
    • Mast access ladder, mast grating and lanyard posts
  • Operator Environment
    • Trainer seat that folds away
    • Window shades
    • Cabin pressure manometer gauge
    • Cab roof access ladder
  • Service Tool Options
    • Bushing Retention Tool 178 to 235 mm (7 to 9.250 in) pipe diameter
    • Lifting bails (available on request; required for commissioning)
      – 114 mm (4.5 in) API reg thread
      – 140 mm (5.5 in) API reg thread
      – 168 mm (6.625 in) for top sub/shock sub API reg thread
      – 114 mm (4.5 in) for 178 mm (7 in) pipe BECO thread
      – 152 mm (6 in) for 194 mm (7.625 in) up to 235 mm (9.25 in) pipe BECO thread
  • Technology Products
    • Product Link Elite – cellular
    • Product Link Elite – satellite
    • Product Link Elite – Dual (cellular and satellite)
    • Terrain for Drilling
  • Ground Engaging Tools
    • Drill bits, rotary tricone
      – 228 mm (9.0 in), OPT 1, (S3)
      – 228 mm (9.0 in), OPT 2, (M2)
      – 228 mm (9.0 in), OPT 3, (H1)
      – 251 mm (9.875 in), OPT 1, (M1)
      – 251 mm (9.875 in), OPT 2, (M3)
      – 251 mm (9.875 in), OPT 3, (H1)
      – 270 mm (10.625 in), OPT 1, (S3)
      – 270 mm (10.625 in), OPT 2, (M3)
      – 270 mm (10.625 in), OPT 3, (H1)
      – 311 mm (12.25 in), OPT 1, (M1)
      – 311 mm (12.25 in), OPT 2, (M3)
      – 311 mm (12.25 in), OPT 3, (H1)
  • Dust Suppression
    • Dust curtain hydraulic lifters raise front and rear dust curtains (recommended with dust collector)
    • Tram off spray system
  • Drill Pipe
    • 12.19 m (40 ft) Pipes, 13.7 m (44.9 ft) Mast – Carousel holds quantity of four
      – DTH – 178 mm (7 in)
      – Rotary/DTH – 194 mm (7.625 in)
      – Rotary – 203 mm (8 in)
      – Rotary – 219 mm (8.625 in)
    • 7.62 m (25 ft) Pipes, 17.5 m (57.4 ft) Mast – Carousel holds quantity of four
      – DTH – 178 mm (7 in)
      – Rotary/DTH – 194 mm (7.625 in)
      – Rotary – 203 mm (8 in)
      – Rotary – 219 mm (8.625 in)
      – Rotary – 235 mm (9.25 in) Carousel accepts quantity of two
    • 9.14 m (30 ft) pipes, 13.7 m (44.9 ft) Mast – Carousel holds quantity of two with special sub adapters to connect to DTH hammer and tricone bit (DTH hammer and tricone not included)
      – Accepts 194 mm (7.625 in) pipe
    • Contact factory for additional pipe diameters