Buy Parts View Specs Locations Contact Us Careers Email Signup

Drills

MD6250 Rotary Blasthole Drill Specifications

Bit Load Up to 32 655 kg (Up to 71,993 lb)
Hole Diameter Up to 152-250 mm (Up to 6-9.8 in)
Engine C27 ACERT™ @ 1,800 rpm
Components Toolbox

Specifications

Bit Load
Up to 32 655 kg (Up to 71,993 lb)
Hole Diameter
Up to 152-250 mm (Up to 6-9.8 in)
Engine
C27 ACERT™ @ 1,800 rpm

Drill Deck Misc.

Components
Toolbox
Components
Hydraulic viewing hatch on drill deck with spotlight
Components
Drill pipe thread greaser with remote fill tank or disposable grease bucket
Components
Deck mounted jib crane with 750 kg (1,653 lb)
Components (1)
Toolbox (option)
Components (2)
Hydraulic viewing hatch on drill deck with spotlight (option)
Components (3)
Drill pipe thread greaser actuated from the cab (option)
Components (4)
Jib crane ready (option)

Basic Specs

11.2 m (36.7 ft) mast: Hole diameter range
Up to 152-250 mm (Up to 6-9.8 in)
11.2 m (36.7 ft) mast: Hole depth range – Single pass depth
36.7ft
11.2 m (36.7 ft) mast: Hole depth range – Multi-pass depth
Down to 53.6 m (Down to 176.7 ft)
11.2 m (36.7 ft) mast: Pull-down capacity
Up to 20 411 kg (Up to 45,000 lb)
11.2 m (36.7 ft) mast: Hoist capacity
Up to 20 411 kg (Up to 45,000 lb)
11.2 m (36.7 ft) mast: Hoist speed
2.67ft/sec
11.2 m (36.7 ft) mast: Bit load (single pass)
Up to 22 321 kg (Up to 49,210 lb)
13.6 m (44.6 ft mast): Hole diameter range
Up to 152-250 mm (Up to 6-9.8 in)
13.6 m (44.6 ft mast): Hole depth range – Single pass depth
44.6ft
Angle Drilling
Vertical to 30° (in 5° increments)
13.6 m (44.6 ft mast): Pull-down capacity
Up to 29 483 kg (Up to 65,000 lb)
13.6 m (44.6 ft) Mast - Hoist Capacity
Up to 22 113 kg (Up to 48,750 lb)
13.6 m (44.6 ft) Mast - Hoist Speed
2.16ft/s
13.6 m (44.6 ft) Mast - Bit Load - Single Pass
Up to 32 655 kg (Up to 71,993 lb)
U.S. EPA Tier 2 Equivalent - Engine
C27 ACERT™ @ 1,800 rpm
U.S. EPA Tier 2 Equivalent - Emissions
U.S. EPA Tier 2 equivalent
U.S. EPA Tier 2 Equivalent - Rated Horsepower
875mm H2O
U.S. EPA Tier 2 Equivalent - Elevation Capability
15000ft
U.S. EPA Tier 4 Final - Engine
C27 ACERT @ 1,800 rpm
U.S. EPA Tier 4 Final - Emissions
U.S. EPA Tier 4 Final
U.S. EPA Tier 4 Final - Rated Horse Power
879mm H2O
U.S. EPA Tier 4 Final - Elevation Capability
12000ft
Compressor - Rotary Drilling
56.6 m³/min (2,000 ft³/min) @ 8.6 bar (125 psi)
Compressor - DTH Drilling (1)
38.2 m³/min (1,350 ft³/min) @ 34.4 bar (500 psi)
Compressor - DTH Drilling (2)
42.4 m³/min (1,500 ft³/min) @ 24.1 bar (350 psi)
Angle Drilling Available
30° (in 5° increments)
11.2 m (36.7 ft) Mast - Bit Load - Single Pass
Up to 22 321 kg (Up to 49,210 lb)
11.2 m (36.7 ft) Mast - Hoist Capacity
Up to 20 411 kg (Up to 45,000 lb)
11.2 m (36.7 ft) Mast - Hoist Speed
2.65ft/s
11.2 m (36.7 ft) Mast - Hole Depth Range - Multi Pass Depth
Down to 53.9 m (Down to 176.7 ft)
11.2 m (36.7 ft) Mast - Hole Depth Range - Single Pass Depth
36.7ft
11.2 m (36.7 ft) Mast - Hole Diameter Range
Up to 152-250 mm (Up to 6-9.8 in)
11.2 m (36.7 ft) Mast - Pulldown Capacity
Up to 20 411 kg (Up to 45,000 lb)
13.6 m (44.6 ft) Mast - Hole Depth Range - Multi Pass Depth
Down to 37.9 m (Down to 124.6 ft)
13.6 m (44.6 ft) Mast - Hole Depth Range - Single Pass Depth
44.6ft
13.6 m (44.6 ft) Mast - Hole Diameter Range
Up to 152-250 mm (Up to 6-9.8 in)
13.6 m (44.6 ft) Mast - Pulldown Capacity
Up to 29 483 kg (Up to 65,000 lb)
U.S. EPA Tier 2 Equivalent - Power Rating (ISO 14396)
826HP
U.S. EPA Tier 4 Final - Power Rating (ISO 14396)
872HP

Cooling

Components (1)
Coolers with easy cleaning access
Components (2)
Separate engine cooling module
Components (3)
All cooler core sections are replaceable
Features
Functional in ambient temperature of 52° C (125° F)
Components (4)
Automatic variable speed fan control

Hydraulics

Components (1)
Two (2) primary pumps – 145 cc (piston, with proportional electronic controls)
Components (2)
One (1) auxiliary circuit pump – 110 cc (piston, load sensing)
Components (3)
Two (2) fan pumps – 74 cc (piston, with proportional electronic controls)
Components (4)
Two (2) charge pumps – 43.9 + 56.5 cc (double stack gear, fixed displacement)
Components (5)
Scheduled Oil Sampling (S·O·S) ports

Climate Choices

Climate Level 1 (standard)
–1° C (30° F)
Climate Level 1 (standard)
Withstands high heat to 52° C (125° F)
Climate Level 1 Standard Fluids and Lubricants (1)
Rated down to –1° C (30° F)
Climate Level 1 Standard Fluids and Lubricants (2)
Withstands high heat to 52° C (125° F)
Climate Level 2 Arctic Fluids and Lubricants
Rated down to –18° C (–0.4° F)
Climate Level 4 Arctic Fluids and Lubricants (1)
Rated down to –40° C (–40° F)
Climate Level 4 Arctic Fluids and Lubricants (2)
Diesel fired heating system that heats and circulates engine coolant through: engine block, below deck water tank, heating elements for battery trays, with a provision for fuel tanks.
Climate Level 4
Arctic fluids
Climate Level 4 Arctic Fluids and Lubricants (3)
Full Arctic lubricant package to include: engine oil, compressor oil and hydraulic oil.
Climate Level 4 Arctic Fluids and Lubricants (4)
Electric heating package with breaker panel to power: 120V heating blanket for compressor receiver tank, compressor control box, heat trace for compressor control lines, heat trace for hosing from water tank to water pump and water fast-fill assembly, plu
Climate Level 4 Arctic Fluids and Lubricants (5)
Shore power connection box with switchable 240-600V (50 amp) connection (diesel gen set and/or plug supplied locally). Box includes standard 50 hz battery charger, if 60 hz charger required to be ordered via after market, refer to P-n 540-4271
Climate Level 4
Compressor control box enclosure with self-purging air lines
Climate Level 4
Shore power connection box supports switchable 240-600 volt, 50 amp waterproof connection
Climate Level 4 Arctic fluids and lubricants (6)
Breaker panel includes five (5) additional breakers for locally supplied heating elements if needed.

Weights

Working weight range
56 468 kg to 64 154 kg (124,490 lb to 141,436 lb)
Working Weight Range
56 468 kg to 64 154 kg (124,490 lb to 141,436 lb)

Engine Choices

U.S. EPA Tier 2 Equivalent - Engine
C27 ACERT @ 1,800 rpm
U.S. EPA Tier 2 Equivalent - Emissions
U.S. EPA Tier 2 equivalent
U.S. EPA Tier 2 Equivalent - Rated Horsepower
875mm H2O
U.S. EPA Tier 4 Final - Engine
C27 ACERT @ 1,800 rpm
U.S. EPA Tier 4 Final - Emissions
U.S. EPA Tier 4 Final
U.S. EPA Tier 4 Final - Rated Horse Power
879mm H2O
Components (1)
Dual starter motors
Features
500 hour service interval
Components
Turbo and exhaust manifold guards
Features
Scheduled oil sampling (S·O·SSM) ports
Components (2)
Common air intake filters provide +500 hour service interval in normal operating conditions
Components (3)
Ether starting aid (ether bottle supplied locally)

Compressor Choices

DTH Drilling
Includes tool lubrication system and hammer storage
DTH Drilling - 1350 cfm/500 psi
38.2 m³/min (1,350 ft³/min) @ 34.4 bar (500 psi) includes 113.5 L (30 gal) tool oiler
DTH Drilling - 1500 cfm/350 psi
42.4 m³/min (1,500 ft³/min) @ 24.1 bar (350 psi) includes 113.5 L (30 gal) tool oiler
Rotary Drilling
Optional tool lubrication system
Rotary Drilling - 2000 cfm/125 psi
56.6 m³/min (2,000 ft³/min) @ 8.6 bar (125 psi)
Note
With the compressor’s variable volume control, the operator can limit air output resulting in reduced fuel consumption. Both high and low pressure compressors contain this feature.
Choice
Electronic compressor control and regulation with purged air lines

Receiver Tank Choices

Choice (1)
Low pressure 8.6 bar (125 psi) for ASME/CRN/AU or CE
Choice (2)
High pressure 24.1 or 34.4 bar (350 or 500 psi) for ASME/CRN/AU or CE

Regulatory Compliance

Features
CE compliant
Features
EAEU certifiable
Features
AUS compliant
Features
CSA certified
Features
Tier 2 and Tier 4 Final configurations
Features
MDG15 and MDG41 aligned
Features
Meets over 30 ISO standards

Frame and Work Deck

Features (1)
Jacks, mast pivot and deck are welded integrally to mainframe for maximum durability and long life
Components (1)
Stationary drill deck for vertical and angle drilling
Components (2)
Four leveling jacks provide leveling on a 7° bench (any orientation)
Features (2)
Slip resistant surfaces
Features (3)
Fuel tank capacity 1416 L (374 gal)
Features (4)
Fuel capacity expansion for additional 1416 L (374 gal)
Features (5)
Three (3) egress points on deck areas in addition to main access
Components (3)
Heavy duty tow hooks (front end)
Components (4)
Four (4) lift lugs, for use with cables or chains
Components (5)
Pipe guide roller assembly mounted on drill deck for loading drill pipe
Features (6)
Walk-around cab access (with railing and toe guards) for cab perimeter to drill deck (option)
Components (6)
Cab-roof access ladder with guard plus roof safety railing for ease of access to air conditioner/pressurizer/heater (option)
Components (7)
Pipe guide roller assembly mounted on drill deck for loading drill pipe
Features (7)
Platform to mount fire suppression bottles and/or diesel gen set on non-drill-end (option)

Frame

Features
Pipe guide roller assembly mounted on drill deck (rear deck) for loading drill pipe

Frame Access Choices

Choice (1)
Fixed access stairs to the cab area
Choice (2)
Cascading hydraulic stairs with walkway around the cab to the drill deck (option). Includes jack and tram interlock activated when the stairs are down

Undercarriage

Model
Cat® 336E EL Excavator type
Ground clearance
24in
Carrier Rollers
Three (3)
Track chain guards and guides
Level two
Drawbar Pull
93745lbf
Travel Speed Display
1.5mile/h
Triple Grousers (1)
600 mm (23.6 in); for hard rock 0.88 bar (12.7 psi) ground pressure
Triple Grousers (2)
750 mm (29.5 in); for soft rock 1.10 bar (15.9 psi) ground pressure
Ground Clearance
24in
Lower rollers
Twelve (12)
Travel Speed
1.5mile/h

Mast and Pipe Carousel Features

Features (1)
Pipe carousel, standard:
– 11.2 m (36.7 ft) Mast: holds quantity of four (4) 10.6 m (35 ft) pipes
– 13.6 m (44.6 ft) Mast: holds quantity of four (4) 6.1 m (20 ft) pipes
Features (2)
Pipe carousel, dual purpose:
– 11.2 m (36.7 ft) Mast: holds quantity of two (2) 10.6 m (35 ft) pipes and quantity of two (2) 7.62 m (25 ft) pipes, and adapters to connect to DTH hammer and tricone bit (DTH hammer and tricone not included)
– Accepts
Features (3)
Vertical or angle drilling 0-30°; in 5° increments
Features (4)
Hydraulically actuated, self-indexing pipe carousel accepts pipe diameters from 127 mm (5.0 in) to 194 mm (7.625 in)
Features (5)
Drill strings configured for bit changes (above the deck)
Features (6)
Single cylinder pulldown/hoist system
Features (7)
Auto tensioning of pull down and hoist cables
Features (8)
Sliding deck wrench assembly
Features (9)
Configured with roller deck bushing
Features (10)
Overhead winch with cable and hook plus remote control; variable speed drive with ≥ 1818 kg (4,000 lb) rating, length to reach 6.1 m (20 ft) past drill deck (option)
Features (11)
Tool oiler, 113.5 L (30 gal) oil injection system (option for low pressure compressor configurations)
Features (12)
Variable grip hydraulic break out wrench range choices are 114 mm to 152 mm (4.5 in to 6.0 in) or 152 mm to 216 mm (6.0 in to 8.5 in)
Features
Thread greaser with reloadable tank or disposable grease bucket
Features (13)
Closed circuit camera in mast is used to view pipe carousel/top drive operation while racking pipes
Features (14)
Pipe positioner for angle drilling or multi-pass pipe handling, actuated from the cab, with safety interlocks
Features (15)
Rotation gear box with single motor, up to 160 rpm, up to 11 600 N∙m (8,555 lbf-ft) torque
Features (16)
Variable hydraulic break out wrench grip range choices are 114 mm to 152 mm (4.5 in to 6.0 in) or 152 mm to 216 mm (6.0 in to 8.5 in)
Features (17)
Camera on mast is closed circuit and used to view the pipe carousel/top drive operation
Features (18)
Pipe positioner for angle drilling, multi-pass pipe handling
Features (19)
Rotation gear box with single motor, up to 160 rpm, up to 11 600 N∙m (8,555 lbf-ft) torque
Features (20)
Manual pipe catcher – One (1) wire rope hydraulically actuated pipe catcher, pipe positioner, manual bit basket or
Features (21)
Hydraulic – One (1) hydraulic pipe catcher, hydraulically actuated pipe positioner, hydraulic bit basket

Mast Packages - Standard or Premium Choices

11.2 m (36.7 ft) Mast - Single Pass Depth
36.7ft
11.2 m (36.7 ft) Mast - Multi Pass Depth
Down to 53.6 m (Down to 176.7 ft)
11.2 m (36.7 ft) Mast - Pulldown - Rated Single Cylinder Pulldown/Hoist System
Up to 20 411 kg (Up to 45,000 lb)
11.2 m (36.7 ft) Mast - Hoist
Up to 20 411 kg (Up to 45,000 lb)
13.6 m (44.6 ft) Mast - Single Pass Depth
44.6ft
13.6 m (44.6 ft) Mast - Multi Pass Depth
Down to 37.9 m (Down to 124.6 ft)
13.6 m (44.6 ft) Mast - Pulldown
Up to 29 483 kg (Up to 65,000 lb)
13.6 m (44.6 ft) Mast - Hoist
Up to 22 113 kg (Up to 48,750 lb)
Angle Drilling
Available with any mast

Mast Packages: Standard or Premium Choices

11.2 m Mast: Mast accessories
One wire rope pipe catcher, pipe positioner, manual bit basket
11.2 m Mast: Mast accessories
One hydraulic pipe catcher, pipe positioner, hydraulic operated bit basket (HOBB)
13.6 m Mast: Mast accessories
Two wire rope pipe catchers, pipe positioner, and manual bit basket
13.6 m Mast: Mast accessories
One wire rope, one hydraulic pipe catchers, pipe positioner, hydraulic operated bit basket (HOBB)

Drill Pipe - Mast Size Dependent

Standard carousel pipe: 6.09 m (20 ft) pipes for 13.6 m (44.6 ft) Mast - Accepts quantity of four (4): Rotary/DTH
5in
Standard carousel pipe: 6.09 m (20 ft) pipes for 13.6 m (44.6 ft) Mast - Accepts quantity of four (4): Rotary (1)
6in
Standard carousel pipe: 6.09 m (20 ft) pipes for 13.6 m (44.6 ft) Mast - Accepts quantity of four (4): Rotary (2)
7in
Standard carousel pipe: 6.09 m (20 ft) pipes for 13.6 m (44.6 ft) Mast - Accepts quantity of four (4): Rotary (3)
7.625in
Standard carousel pipe: 6.09 m (20 ft) pipes for 13.6 m (44.6 ft) Mast - Accepts quantity of four (4): DTH (1)
5.5in
Standard carousel pipe: 6.09 m (20 ft) pipes for 13.6 m (44.6 ft) Mast - Accepts quantity of four (4): DTH (2)
6.5in
Standard carousel pipe: 10.6 m (35 ft) pipes for 11.2 m (36.7 ft) Mast - Accepts quantity of four (4): Rotary/DTH
5in
Standard carousel pipe: 10.6 m (35 ft) pipes for 11.2 m (36.7 ft) Mast - Accepts quantity of four (4): Rotary (1)
6in
Standard carousel pipe: 10.6 m (35 ft) pipes for 11.2 m (36.7 ft) Mast - Accepts quantity of four (4): Rotary (2)
7in
Standard carousel pipe: 10.6 m (35 ft) pipes for 11.2 m (36.7 ft) Mast - Accepts quantity of four (4): Rotary (3)
7.625in
Standard carousel pipe: 10.6 m (35 ft) pipes for 11.2 m (36.7 ft) Mast - Accepts quantity of four (4): DTH (1)
5.5in
Standard carousel pipe: 10.6 m (35 ft) pipes for 11.2 m (36.7 ft) Mast - Accepts quantity of four (4): DTH (2)
6.5in
Dual purpose carousel pipe: 6.09 m (20 ft) pipes for 13.6 m (44.6 ft) Mast - Accepts quantity of two (2)
Quantity of two (2) 3 m (10 ft) starter pipes (included in the drill tool package)
Dual purpose carousel pipe: 6.09 m (20 ft) pipes for 13.6 m (44.6 ft) Mast - Accepts quantity of two (2): Rotary and DTH (1)
5.5in
Dual purpose carousel pipe: 6.09 m (20 ft) pipes for 13.6 m (44.6 ft) Mast - Accepts quantity of two (2): Rotary and DTH (2)
6.625in
Dual purpose carousel pipe: 10.6 m (35 ft) pipe for 11.2 m (36.7 ft) Mast - Accepts quantity of two (2)
Quantity of two (2) 7.6 m (25 ft) starter pipes (included in the drill tool package)
Dual purpose carousel pipe: 10.6 m (35 ft) pipe for 11.2 m (36.7 ft) Mast - Accepts quantity of two (2): Rotary and DTH (1)
5.5in
Dual purpose carousel pipe: 10.6 m (35 ft) pipe for 11.2 m (36.7 ft) Mast - Accepts quantity of two (2): Rotary and DTH (2)
6.625in

Tool Package Rotary

Components (1)
One-piece roller deck bushing
Components (2)
Pipe positioner rollers
Components (3)
Deck wrench
Components (4)
Top sub
Components (5)
Bit sub
Components (6)
Pipe wiper seal
Components
Bushing retention tool
Components
Drill tool lubricator
Components
Tool oil injection system 113 L (30 gal)
Components
Lifting bails (available on request; required for commissioning)
Components (7)
Drill tool lubricator (optional)
Components (8)
Shock sub (option)

Tool Package DTH

Components (1)
Two-piece roller deck bushings
Components (2)
Pipe positioner rollers
Components (3)
Deck wrench
Components (4)
Shock sub
Components (5)
Top Sub
Components
Cross over subs (top and hammer)
Components
Bushing retention tool
Components
Lifting bails (available on request; required for commissioning)
Components (6)
Hammer Sub
Components (7)
Pipe wiper seal
Components (8)
Drill tool lubricator is included with selection of DTH Compressor

Overhead Winch System with Remote - Option

Capacity Rating
4000lb
Cable Diameter
0.5in
Reach - Past the Drill Deck
20ft
Components
Variable speed drive

Rotary Head Top Drive System

Torque - Single Motor
8629lb/ft
Rotation Speed
0-160 rpm
Components (1)
Spindle – 140 mm (5.5 in) API regular thread with splined collar
Components (2)
Rotary torque control
Components (3)
Virtual rotary head travel interlocks

Operator Environment

Cab Design
– Spacious FOPS cab has 3 m2 (32.3 ft2) floor space with an integrated operator station
– Cab rubber shock-mounts absorb mechanical vibration and restrict exterior noise
– Operator station design integrates an ergonomic seat, joystick controls with
Cab Packages
– Standard configuration includes a fabric seat, single pane window glass, and wiper for the driller window
– Premium configuration includes additional storage, a leather seat with heat and ventilation, heavy duty suspension, dual pane window glass, a
Seating
– Seat swivels, locks and retractable, two-point/76 mm (3 in) wide seat belt, tilts (5° adjustment), lumbar support, fore/aft seat adjustment 80 mm (3.1 in)
– Fold away trainer’s seat with seat belt (option)
Windows
– Large windows front, rear and right cab side; full length drill window with guard
– Windshield wipers with a common washer tank
– Window shades (option)
– Manometer Pressure Gauge (option)
Lighting
– LED interior lights and map light at operators seat, backlit joysticks and keypads
– Flood lights for the drill perimeter
– Spot lights for power group area; drill deck; mast carousel; access ladder and walkways
– Standard lighting is 1,300 lum
HVAC
– Floor heating vent
– Roof-mounted air conditioner/heating/pressurizing unit
– Filter access from deck, 500 service interval
– Defogging HVAC vents on main window
Cameras
– Three (3) CC cameras (front and left side) providing 360° vision coverage from operators seat; camera on the mast to view pipe carousel/top drive operation
Components
Two swing out doors and Cat keyed locks
Components
Literature holder
Seating:
– Seat cover in fabric, or a leather option with heat and cooling
– Seat swivels, locks and has two point/76 mm (3 in) seat belt, tilts (5° adjustment), lumbar support, fore/aft seat adjustment 80 mm (3.1 in)
– Fold away trainer’s seat with seat bel
Windows:
– Large windows front, rear and right cab side; full length drill window with guard (option), single or double pane glass
– Window shade (option)
– Windshield wipers with a common washer tank
– Manometer Pressure Gauge (option)
Lighting:
– LED interior lights and map light at operators seat, backlit joysticks and keypads
– Flood lights for the drill perimeter
– Spot lights for power group area; drill deck; mast carousel; access ladder and walkways
– Standard lighting is 1,300 lum
HVAC:
– HVAC floor vent in the foot rest area
– Roof-mounted air conditioner/heating/pressurizing unit
– Filter access from deck, 500 service interval
– Defogging HVAC vents on main window
Cameras:
– Two (2) CC cameras (front and left side) providing 360° vision coverage from operators seat
– Camera on the mast to view pipe carousel/top drive operation

Operating System Controls - Standard

Components (1)
All electric controls for drilling, tramming, leveling plus auxiliary functions
Components (2)
Rotary torque control
Components (3)
Virtual rotary head travel stops
Components (4)
Pipe positioner engaged/disengaged indicator, with interlock
Components (5)
Drill depth meter
Components (6)
Drill performance and display system
Components (7)
Delayed engine shut down
Components (8)
Filter indicators for hydraulic, fuel, compressor and engine
Components (9)
Jack pressure sensors in display
Components (10)
Data logging of machine health with warnings and fault code records with export capability
Components (11)
Dust suppression control
Components (12)
Mast lock indicator
Components (13)
ECM proportional fan speed control system
Components (14)
Tram interlock, machine stability limits
Components (15)
Tram interlock, pipe in hole
Components (16)
Tram interlock, mast up and locked or down and parked
Components (17)
Tram interlock, jack retracted
Components (18)
Tram interlock, winch parked
Components (19)
Cab environment controls (AC, filter, heat, fan speeds)
Components (20)
Pre wired for Terrain and Autonomous Operation
Components (21)
Drill Assist automated functionality:
– Auto level, auto jack retract
– Auto mast raise and lock, auto mast unlock and park

Operating System Controls (Standard)

Components
Winch remote control tethered pendant (control outside cab)

Premium Controls

Components (1)
Drill Assist automated functionality:
– Auto drill single pass (option)
Components (2)
Auto level
Components (3)
Auto mast
Components (4)
Auto drill single pass
Components (5)
Auto retract

Drill Table and Work Deck

Components
Winch – variable speed drive with ≥ 1587 kg (3,500 lb) rating
Components
Thread greaser with reloadable tank or disposable grease bucket

Automation and Technology

Type (1)
Cat Terrain ready
Components (1)
Drill performance indicators: feed and rotary torque pressure, head RPM, bit air pressure, target depth and drill depth, pipe counter, water injection flow rate, advance per revolution, rate of penetration
Components (2)
Drill Assist (auto level, auto retract jacks, auto raise and lower mast, single-pass auto drill)
Type (2)
Autonomy ready
Components (3)
Product Link Elite
Components (4)
Wiring for third party interface

Automation Technology

Type
Semi-autonomous enabled for single row missions
Type
Fully autonomous enables multi row, full pattern missions, includes vision and perception
Command for Drilling
Command for Drilling enables each operator to manage more than one machine
Type
ADS Autonomous Drilling Solution package (shipped with drill) requires second fuel tank

Dust Control Choices

Water Injection - Tank Mounted Below Front Deck
336gal (US)
Choices (1)
Water flow meter, volume control, tank fill level indicator
Choices (2)
Static dust curtains, four sided/boxed enclosed
Water Injection plus Dust Collector (1)
127 m3/min (4,500 ft3/min) dust collector; includes standard water injection
Water Injection plus Dust Collector (2)
Dust collector box with ground level access
Water Injection plus Dust Collector (3)
Self-cleaning filters, dust chute clean-out door
High Volume Water Injection - Maximum - Tanks Total Capacity
736gal (US)
Tank Below Deck - Capacity - Isolated for Extreme Cold Weather
336gal (US)
Tank Above Deck - Capacity
400gal (US)
Choices (3)
Dust curtain hydraulic lifters raise front and rear dust curtains (option) (recommended with dust collector)
Choices (4)
Tram off spray to wet the ground around the cuttings pile (option)
Choices (5)
Water pump interlock
Choices (6)
Dust curtain hydraulic lifters raise front and rear dust curtains (option) (recommended with dust collector)
Choices (7)
Tram off spray system (option)
Water Injection plus Dry Dust Collector (2)
Self-cleaning filters, dust chute with ejector
Water Injection plus Dry Dust Collector (1)
127 m³/min (4,500 ft³/min) dust collector; includes standard water injection

Safety and Security

Feature (1)
Platform on non-drill-end for mounting fire suppression bottles and/or diesel gen set (option)
Components (1)
Alloy drill deck covers, for servicing when mast is horizontal
Components (2)
Seven (7) engine shut down buttons, by each drill egress/access point, in cab, in engine area, on drill deck
Components
Strobe beacon on cab; Left front of drill
Components (3)
Over forty (40) conditional safety interlocks
Manual
Printed copy of the operation and maintenance manual
Components
Turbo and exhaust protection
Components (4)
Hinged window guard over the full length of the front drill window
Components (5)
Three (3) egress points on deck areas in addition to main access
Components (6)
Self-closing gates secure egress ladder locations
Components (7)
Electric horn activated by push button in the cab
Components (8)
Automatic tram alarm
Components (9)
Under deck mounted battery box with keyed battery disconnect/starter disconnect/remote jump start terminals
Components (10)
Compressor air hoses with safety retention cables
Components (11)
Slip resistant surfaces
Components (12)
Tow hooks on non-drill-end
Feature (2)
Approach angle of 15 degrees facilitates loading and unloading on a lowboy
Components (13)
Lifting lugs
Components (14)
Front window guard (option)

Service Packages

Package (1)
Basic – Centralized manual lubrication for all pivot points, gravity fill for fuel and water
Package (2)
Standard – Fast fill for fuel and water, automated lubrication system (option)
Package (3)
Service center for lubricant drain and fill, automated lubrication system, fast fill fuel and water, blow down hose (option)

Dimensions (Approximate) - 11.2 m (36.7 ft) Mast

Width - Front
18.45ft
Width - Rear
15.81ft
Height - Mast Up
56.3ft
Body Length
38.41ft
Length - Mast Down
58.3ft
Height - Mast Down
16.84ft
Mast Only Length
36.7ft
Width Non-Cab End
15.9ft
Width Cab End
18.45ft
Note
Width and length dimensions include: cascading stairs and walk-around access for cab.
Mast Only Shipping Length
53.5ft

Dimensions (Approximate) - 13.6 m (44.6 ft) Mast

Width - Front
18.45ft
Width - Rear
15.81ft
Height - Mast Up
61.13ft
Body Length
38.41ft
Length - Mast Down
66.17ft
Height - Mast Down
16.84ft
Mast Only Length
44.6ft
Width Non-Cab End
15.9ft
Width Cab End
18.45ft
Note
Width and length dimensions include: cascading stairs and walk-around access for cab.
Mast Only Shipping Length
61.4ft

Auxiliary Controls

Components
Winch with remote control tethered pendant
Components
Drill operation remote control for tram, setup and drill controls from ground in line of sight

Mast Accessories

Accessory (1)
11.2 m (36.7 ft) or 13.6 m (44.6 ft) Manual pipe catcher – One (1) wire rope pipe catcher, manual bit basket
Accessory (2)
11.2 m (36.7 ft) Mast, One (1) hydraulically actuated pipe catcher, hydraulically operated bit basket
Accessory (3)
13.6 m (44.6 ft) Mast, One (1) hydraulically actuated pipe catcher, plus one (1) wire rope pipe catcher, hydraulically operated bit basket

Carousel (Mast size and pipe diameter dependent)

Standard carousel pipe: 6.1 m (20 ft) pipes for 13.6 m (44.6 ft) Mast - holds quantity of four (4)
– 127 mm (5.0 in)
– 140 mm (5.5 in)
– 152 mm (6.0 in)
– 165 mm (6.5 in)
– 178 mm (7.0 in)
– 194 mm (7.625 in)
Standard carousel pipe: 10.6 m (35 ft) pipes for 11.2 m (36.7 ft) Mast - holds quantity of four (4)
– 127 mm (5.0 in)
– 140 mm (5.5 in)
– 152 mm (6.0 in)
– 165 mm (6.5 in)
– 178 mm (7.0 in)
– 194 mm (7.625 in)
Dual purpose carousel pipe: 11.2 m (36.7 ft) Mast: holds quantity of two (2) 10.6 m (35 ft) pipes and quantity of two (2) 7.62 m (25 ft) pipes, and adaptors to connect to DTH hammer and tricone bit (DTH hammer and tricone not included)
Dual purpose pipe carousel accepts 140 mm (5.5 in) or 168 mm (6.625 in) pipe – contact factory for additional pipe diameters

Optional Equipment:

  • Frame
    • Fuel tank expansion of +1609 L (425 gal) for total of 3218 L (850 gal) (Required for autonomy packages)
    • Platform on non-drill-end to mount fire suppression bottles and/or diesel gen set
    • Jib crane ready (Jib crane not included)
  • Mast
    • Overhead winch assembly with cable and hook, plus with remote control; variable speed drive with ≥ 1814 kg (4,000 lb) rating, length to reach 6.1 m (20 ft) past drill deck
    • Tool lubrication system for Rotary Drilling with 113.5 L (30 gal) capacity
    • Pipe thread greaser with reloadable tank for disposable grease bucket
  • Service Tools
    • Bushing retention tool – 102-194 mm (4.0-7.625 in)
    • Work Tools
      – Lifting bails (available on request; required for commissioning)
      • API thread 89 mm (3.5 in)
      • API thread 114 mm (4.5 in)
      • API thread 140 mm (5.5 in)
      • BECO thread 102 mm (4.0 in)
      • BECO thread 114 mm (4.5 in)
      • BECO thread 152 mm (6.0 in)
  • Drill Deck Misc.
    • Tool box in deck
    • Hydraulic viewing hatch with spotlight
  • Operator Environment
    • Fold up trainer’s seat with seat belt
    • Cabin pressure manometer gauge
    • Window shades
    • Cab roof access system with ladder, cage and rails (only available with cascading stairs and cab walkway)
  • Technology Products
    • Product Link Elite; satellite, cellular or dual
    • Terrain guidance system hardware
  • Dust Suppression
    • Dust curtains, four sides boxed in, with hydraulic lifters to raise front and rear dust curtains (recommended with dust collector)
    • Tram off spray system
  • Drill Bits, Rotary Tricone
    • Recommended for Rotary Applications
    • All bits have standard nozzles
    • Obtain S/M/H codes from the Rock Formation to Bit Conversion table https://catpublications.com search for PEXQ1027
    • Ship out plans for each drill configuration allow for one pallet of bits. Additional pallets may require an additional truck.
      – 171 mm (6.75 in), Option 1, (S2)
      – 171 mm (6.75 in), Option 2, (M1)
      – 171 mm (6.75 in), Option 3, (M3)
      – 200 mm (7.875 in), Option 1, (S2)
      – 200 mm (7.875 in), Option 2, (M1)
      – 200 mm (7.875 in), Option 3, (M3)
      – 229 mm (9.0 in), Option 1, (S3)
      – 229 mm (9.0 in), Option 2, (M2)
      – 229 mm (9.0 in), Option 3, (H1)
      – 251 mm (9.875 in), Option 1, (M1)
      – 251 mm (9.875 in), Option 2, (M3)
      – 251 mm (9.875 in), Option 3, (H1)
  • Drill Pipe*
    • Standard carousel pipe: 10.6 m (35 ft) pipes for 11.2 m (36.7 ft) Mast – Accepts quantity of four (4)
      – 127 mm (5.0 in)
      – 140 mm (5.5 in)
      – 152 mm (6.0 in)
      – 165 mm (6.5 in)
      – 178 mm (7.0 in)
      – 194 mm (7.625 in)
    • Standard carousel pipe: 6.1 m (20 ft) pipes for 13.6 m (44.6 ft) Mast – Accepts quantity of four (4)
      – 127 mm (5.0 in)
      – 140 mm (5.5 in)
      – 152 mm (6.0 in)
      – 165 mm (6.5 in)
      – 178 mm (7.0 in)
      – 194 mm (7.625 in)
    • Standard carousel pipe: 10.6 m (35 ft) pipe for 11.2 m (36.7 ft) Mast – Accepts quantity of two (2)
      – Quantity of two (2) 7.62 m (25 ft) pipes with adaptors to connect to DTH hammer or tricone bit (hammer and tricone bit not included)
      – 140 mm (5.5 in)
      – 168 mm (6.625 in)
    • Note: *Contact factory for additional pipe diameters