Buy Parts View Specs Locations Contact Us Careers Email Signup

Dozers

D11 Dozer

Engine Model Cat® C32
Net Power - Rated - ISO 9249/SAE J1349 (DIN) 850 HP
Displacement 1959 in³
Emissions U.S. EPA Tier 4 Final/ EU Stage IV/ Korea Tier 4 Final

The new Cat® D11 Dozer delivers higher productivity at lower cost. The latest technology provides operator with full command of the dozer for safe and efficient operation. This means you can comfortably move more material in less time, at a lower cost per ton, for a faster payback on your investment. This intelligent dozer has a sophisticated machine protection strategy, as well as a machine guidance system which further drives higher productivity and lower cost.

Engine

Engine Model
Cat® C32
Net Power - Rated - ISO 9249/SAE J1349 (DIN)
850HP
Displacement
1959in³
Emissions
U.S. EPA Tier 4 Final/ EU Stage IV/ Korea Tier 4 Final
Note (1)
All nonroad Tier 4 Final, Stage IV, and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) with 15 ppm (mg/kg) of sulfur or less, or up to B20 biodiesel blended with ULSD. B20 should meet ASTM D7467 specifi cation (b
Note (2)
Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241.
Flywheel Power
850HP

Engine - U.S. EPA Tier 4 Final/EU Stage V

Engine Model
Cat® C32
Displacement
1959in³
Engine Power - Net SAE J1349/ISO 9249 - Forward
850HP
Engine Power - Net SAE J1349/ISO 9249 - Reverse
955HP
Note (1)
*Excludes all fan losses.
Note (2)
Engine ratings apply at 1,800 rpm.
Note (3)
Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required.
Engine Power - ISO 14396 - Reverse
999HP
Engine Power - Gross SAE J1995* - Reverse
1015HP
Stroke
6.4in
Engine Power - ISO 14396 - Forward
882HP
Engine Power - Gross SAE J1995* - Forward
899HP
Bore
5.7in

Engine - U.S. EPA Tier 2 Equivalent

Engine Model
Cat® C32
Displacement
1959in³
Engine Power - Net SAE J1349/ISO 9249 - Forward
850HP
Engine Power - Net SAE J1349/ISO 9249 - Reverse
957HP
Note (1)
*Excludes all fan losses.
Note (2)
Engine ratings apply at 1,800 rpm.
Note (3)
Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required.
Engine Power - ISO 14396 - Reverse
998HP
Engine Power - Gross SAE J1995* - Reverse
1015HP
Engine Power - Gross SAE J1995* - Forward
899HP
Stroke
6.4in
Engine Power - ISO 14396 - Forward
882HP
Bore
5.7in

Service Refill Capacities

Fuel Tank
500gal (US)
Fuel Tank - High Capacity
475gal (US)
Cooling System
46.8gal (US)
Engine Crankcase
35.1gal (US)
Power Train
120gal (US)
Final Drive - Each
12.4gal (US)
Roller Frames - Each
24.8gal (US)
Hydraulic Tank
42.2gal (US)
Variable Fan Hub
41.7gal (US)
Pivot Shaft Compartment
103.3gal (US)
Hydraulic Tank Oil - Only
64.7gal (US)
Implement Hydraulic System - Tank Only
117.6gal (US)
DEF Tank
143.4gal (US)
Hydraulic System Chassis + Blade and Ripper (Carrydozer)
143.4gal (US)
Hydraulic System Chassis + Blade and Ripper (Standard)
117.6gal (US)
Hydraulic System Tank and Chassis
64.7gal (US)
Power Train - Refill Volume
103.3gal (US)
Cooling System Refill - Tier 2 Equivalent Engine
41.7gal (US)

Fuel Tank Capacities

Fuel Tank - Total Volume
500gal (US)
Fuel Tank - Usable Volume
475gal (US)

Weights

Operating Weight
229800lb
Operating Weight - Carrydozer
250665lb
Note (1)
D11 Operating Weight: Includes blade tilt cylinders, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 11U ABR bulldozer, single-shank ripper with pin-puller, fast fuel, 710 mm (28 in) ES shoes, and operator.
Note (2)
D11 CD Operating Weight: Includes lubricant, coolant, full fuel tank, 915 mm (36 in) extreme service shoes, 11 Carrydozer, singleshank ripper, and operator.
Shipping Weight
86200lb
Operating Weight - Standard
87600lb
Shipping Weight - Carrydozer
86420lb

Hydraulic Controls

Pump Type
Variable displacement piston pump
Combined Pump Output - Implement
177gal/min

Undercarriage

Shoe Type
Extreme Service
Width - Shoe
28in
Width - Shoe - CD
36in
Shoes/Side
41
Grouser Height
4in
Pitch
12.5in
Ground Clearance*
30.6in
Track Gauge
114in
Length - Track on Ground
175in
Ground Contact Area
9781in²
Ground Contact Area - CD
12605in²
Track Rollers/Side
8
Number of Carrier Rollers
1 per side (optional)

Air Conditioning System

Note (1)
The air conditioning system on this machine contains the flourinated greenhouse gas refrigerant R134a (Global Warning Potential = 1430). The system contains 2.1 kg (4.6 lb) of refrigerant which has a CO2 equivalent of 3.003 metric tonnes (3.31 tons)

Standards

ROPS
Rollover Protective Structure (ROPS) meets the following criteria: ISO 3471:2008
FOPS
Falling Objects Protective Structure (FOPS) meets the following criteria: ISO 3449:2005 LEVEL II
Sound (1)
The exterior sound pressure level for the standard machine (ISO 6396:2008) is 116 dB(A) (sound suppressed).
Sound (2)
The operator equivalent sound pressure level (ISO 6396:2008) is 78 dB(A) (sound suppressed).

Dimensions - D11

Width without Trunnions (standard shoe)
148.9in
Length - Basic Dozer with Drawbar
242.5in
Overall Length - Basic Dozer
242.5in
Ground Clearance*
31.4in
Track Gauge
114in
Height (ROPS/canopy)*
185.9in
Length of Track on Ground
175in
Note
*Includes grouser height for total dimensions on hard surfaces.
Height (FOPS cab)*
173.4in
Width over Trunnions
172.4in
Drawbar Height (center of clevis)*
37.1in
Height (top of stack)*
179.1in
Width at Outside of Track (710 mm Track Shoe)
142in
Length with SU-Blade** - No rear attachment
337.8in
Overall Length SU-Blade and SS Ripper**
414.4in

Blades

Semi-Universal (SU)* Capacity
35.6yd³
Semi-Universal (SU)* Width Over Endbits
219.8in
A-Blade Capacity
57yd³
Semi-Universal (SU)* Height
251.8in
U-Blade Capacity
45yd³
Semi-Universal (SU)*
35.6yd³
A-Blade Width
263.9in
U-Blade Width
249.6in
Reclamation Universal - Blade capacity (SAE J1265)
55yd³
Reclamation Universal - Width with blade (over end bits)
251.8in
Carry Dozer - Blade capacity (SAE J1265)
57yd³
Carry Dozer - Width with blade (over end bits)
263.9in

Dimensions - D11 CD

Ground Clearance*
31.4in
Track Gauge
114in
Width without Trunnions (standard shoe)
149.8in
Height (ROPS/canopy)*
185.9in
Length of Track on Ground
175in
Length - Basic Dozer with Drawbar
242.5in
Overall Length - Basic Dozer
242.5in
Note
*Includes grouser height for total dimensions on hard surfaces.
Drawbar Height (center of clevis)*
37.1in
Width over Trunnions
172.4in
Height (top of stack)*
179.1in
Height (FOPS cab)*
173.4in

Transmission

1.0 Forward
2.5mile/h
2.0 Forward
4.4mile/h
3.0 Forward
7.6mile/h
1.0 Reverse
3mile/h
2.0 Reverse
5.3mile/h
3.0 Reverse
9.1mile/h
2 Reverse
4mile/h
3 Forward
7mile/h
2 Forward
4.1mile/h
1 Forward
2.2mile/h
1.5 Reverse
3mile/h
3 Reverse
7.3mile/h
1.5 Forward
3mile/h
2.5 Reverse
5.4mile/h
Drawbar Pull - 3 Forward
46250ft·lbf
Drawbar Pull - 1 Forward
148200ft·lbf
Drawbar Pull - 2 Forward
82300ft·lbf

Ripper - Multi-Shank, Adjustable Parallelogram

Overall Beam Width
131.1in
Maximum Penetration Force - Shank Vertical
77350lb
Maximum Penetration - Standard Tip
43.3in
Pry-Out Force - Multi-Shank Ripper with One Tooth
145640lb

Dimensions

Width - Without Trunnions - Standard Shoe
106in
Ground Clearance
24.1in
Note (2)
**When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm/3.2 in.
Length - Basic Tractor - With Drawbar
183in
Note (1)
* Add the following measurements for attachments: Ripper (single shank) 1519 mm/59.8 in; Ripper (multi-shank) 1613 mm/63.5 in; Drawbar 406 mm/16.0 in; SU Blade 1844 mm/72.6 in; U Blade 2241 mm/88.2 in; A Blade (not angled) 2027 mm/79.8 in; A Blade (angled
Length - Track on Ground
126.2in

Ripper - Single Shank

Pryout Force
148510lb
Maximum penetration depth (standard tip)
63.5in
Maximum penetration force * (shank vertical)
66000lb

Dimensions - D11 Carrydozer

Width at Outside of Track (710 mm Track Shoe)
149.8in
Length with SU-Blade** - No rear attachment
345.1in
Overall Length SU-Blade and SS Ripper**
421.7in

Ripper - Single Shank, Deep Ripping

Maximum penetration force * (shank vertical)
66110lb
Maximum penetration depth (standard tip)
85.5in
Pryout Force
148510lb

Standard Equipment:

  • Operator Environment
    • ROPS/FOPS, Sound-Suppressed Cab
    • High-Definition Primary Touchscreen Display
    • Visibility – Rearview Mirrors
    • Air Conditioner and Heater with Automatic Climate Control
    • Seat – Cloth with Air suspension
    • Cab Glass – Single-Pane Tinted Safety
    • Cab Access – Blade Push Arm Steps and Grab Handle
  • Cat Technology Products
    • VIMS
    • Automated Blade Assist (ABA)
    • Cat Product Link Elite (cellular)
  • Cat Power Train
    • Cat C32 Engine – U.S. EPA Tier 4 Final or Tier 2 Equivalent
    • High-Performance Single-Plane Cooling Module
    • Stator Clutch Torque Divider – Electronic Control
    • Powershift Transmission – Three-Speed Electronic Shift
  • Undercarriage
    • Suspension Type Undercarriage
    • Sleeve Bearing Track
    • Lifetime-Lubricated Rollers and Idlers
    • Track Shoe (ES): 710 mm (28 in) Width
  • Hydraulics
    • Electronically Controlled, Load-Sensing Dozer Lift and Tilt
    • Electronically Controlled, Load-Sensing Ripper Lift and Pitch
    • Dozer Blade – Dual Tilt
    • Electronically Enabled Blade – Quick Drop
  • Electrical
    • 24V Electric Start, Dual Starters
    • Batteries – 4 × 4,200-Amp Hour, 12V
    • Battery Isolation
    • Lights – Halogen – 13 Positions
  • Service And Maintenance
    • Ecology Fluid Drains – All Compartments
    • Hinged Bottom Guards
    • High-Speed Oil Change – Engine and Transmission
    • Ground-Level Fast Fuel Fill
    • Ground-Level Electrical Service Station
    • S·O·SSM Fluid Sampling Ports
    • Diagnostic Connector

Optional Equipment:

  • Operator Environment
    • MineStar Terrain Display
    • Visibility – Dual Camera
    • Visibility – Four Cameras, 360 Degree View
    • Seat – Heated, Cooled, Adjustable Lumbar and Bolsters
    • Cab Glass – Dual-Pane Laminated Impact Safety
    • Cab Glass – High-Pressure Safety (40 psi/275 kPa)
    • Cab Access – Powered Ladder
  • Cat Technology Products
    • AutoCarry
    • Auto Ripper Control
    • Cat Terrain with 3D Blade Control
    • Cat Terrain Ready
    • Cat Product Link Elite Dual Mode (cellular + satellite)
    • Cat Command for Dozing Ready
  • Cat Power Train
    • Hydraulic Cooling Fan – Automatic Reversing
  • Undercarriage
    • Track Shoes (ES): 810/915 mm (32/36 in) Width (various configurations)
    • Track Links – High Abrasion – Tall Link
    • Track Links – Heavy Duty XL – Duralink
    • Track Shoe – Abrasion Resistant
    • Track Shoe – Anti-Packing Round Hole
    • Abrasion Rollers and Idlers
    • Cold Weather Rollers and Idlers
    • Sound Suppression Undercarriage
    • Carrier Roller
  • Hydraulics
    • Carrydozer Hydraulics
    • Dozer Extended Blade Pitch
    • Ripper Pin Puller
  • Electrical
    • Battery Isolation – Dual Pole
    • Lights – LED – Premium Package
  • Service And Maintenance
    • Sound Reduction Sealed Bottom Guards
    • Ground-Level Fluid Fill and Drain
    • Ripper Lubrication – Autolube with Ground-Level Fill
    • Ripper Lubrication – Grouped – Ground-Level Fill
  • Rear Attachments
    • Ripper – Single Shank with Pin Puller
    • Ripper – Single Shank Pushblock with Pin Puller
    • Ripper – Single Shank with Pin Puller – Heavy
    • Ripper – Multi Shank (three shank)
    • Ripper – Multi Shank – Heavy (three shank)
    • Ripper – Multi Shank Leach Pad with Pin Puller
    • Ripper – Multi Shank – Coal (five shank)
    • Counterweight – Rear
    • Drawbar with Counterweight
  • Blades
    • Semi-Universal (27.2 m³/35.6 yd³)
    • Universal (34.4 m³/45.0 yd³)
    • Carrydozer (43.6 m³/57 yd³)
    • Reclamation Universal (42 m³/55 yd³)
    • Reclamation Universal (53.5 m³/70 yd³)
    • Coal Universal (75 m³/98.0 yd³)
    • Coal Universal (65 m³/85.5 yd³)
  • Other
    • Fire Suppression Ready
    • Fire Suppression Installed