PM622 Cold Planer

PM622 Cold Planer

The PM622 is a high-production, half-lane milling machine with a cutting width of 2235 mm (88 in) that performs controlled full-depth removal of asphalt and concrete pavements in a single pass.

Milling Width
88 in
Rated Power
630 HP
Operating Weight
74737 lb
Maximum Milling Depth
13 in

Cutting System

Milling Width
88in
Maximum Milling Depth
13in
Rotor Speeds
100 / 109 / 118 rpm
Number of Bits
185

Power Train

Rated Power
630HP
Engine
Cat C18
Maximum Travel Speed
3.7mile/h
Maximum Milling Speed
328ft/min

Weights

Operating Weight
74737lb
Transport Weight
66139lb

Dimensions

Operating Length - Conveyor Up
47.64ft
Operating Width
10.2ft
Height - Canopy
13.29ft
Maximum Truck Clearance
15.94ft
Minimum Right Cutting Radius
5.91ft
Minimum Left Cutting Radius
6.56ft
Conveyor Swing
60 degrees from center
Transport Length
40.78ft
Transport Width
8.89ft
Transport Height
9.84ft

Service Refill Capacities

Hydraulic Tank
29.9gal (US)
Cooling System
22.5gal (US)
Fuel Tank
292.7gal (US)
Engine Oil
17.2gal (US)
Water Spray System Tank
898.2gal (US)
Diesel Exhaust Fluid (DEF) Tank
12.4gal (US)

Standard Equipment:

  • Operator Environment
    • Ground control keypads
    • Single high-resolution LCD touchscreen display
    • 12-volt power receptacle
  • Cat Connect Technology
    • Cat Product Link
    • Cat GRADE
  • Conveyor
    • Grease tensioner
    • Material removal boost feature
  • Rotor System
    • Automatic plunge-cut
    • Automatic transition feature
    • Obstacle jump
    • Three cutting speeds
  • Powertrain
    • Auto engine idle control
    • High capacity cooling system
    • Dual propel pumps
    • Automatic load control
  • Hydraulic System
    • Dual pump hydraulic propel system
    • Traction control
  • Service And Maintenance
    • Sampling ports for Scheduled Oil Sampling (S·O·S℠)
    • Power hood
    • Platform-level engine oil dipsticks
    • Rotor chamber water spray system
    • Air compressor
    • Accessory drive system
    • 3400 L (898 gal) onboard water tank
    • Side water fill valve
  • Safety And Security
    • Platform handrails
    • Signaling/warning horn
    • Wide-dispersion LED work lights

Optional Equipment:

  • Operator Environment
    • Dual high-resolution LCD touchscreen displays
    • Hydraulically folding canopy with LEDs
    • Air-ride suspension seats
    • Windscreens
  • Cat Connect Technology
    • Inboard ski
    • Sonic sensor (averaging or string line)
    • Ground level grade controls and displays
  • Conveyor
    • Dust abatement system
    • Remote camera (loading conveyor)
  • Rotor System
    • System K Rotor - Course (25 mm)
    • System K Rotor - Course (18 mm)
    • System K Rotor - Standard (15 mm)
    • System K Rotor - Fine (8 mm)
    • System K Rotor - Micro (6 mm)
    • System H Rotor - Micro (6x2 mm)
    • Diamond bits
    • Bit bucket trays
    • Pneumatic bit removal tool
    • Tool holder extractor
    • Rotor turning device with pendant control
  • Powertrain
    • CE certificate
  • Hydraulic System
    • Water tank transfer pump
    • Fuel transfer pump
  • Service And Maintenance
    • High pressure washdown
    • Low pressure washdown
    • Additional spray bars
  • Safety And Security
    • Perimeter LED strip lights
    • Magnetic LED work light
    • Warning beacon (fixed or magnetic mount)
    • Truck signal lights
    • Remote camera (rear, front, magnetic mount)

System K 2.2m Milling Drum (8mm spacing)

Milling Width
88 in
Tool Spacing
0.31 in
Drum Diameter at Tips
42.2 in

System H 2.2m Milling Drum (6x2mm spacing)

Milling Width
88 in
Tool Spacing
0.25 in
Drum Diameter at Tips
42.2 in

System K 2.2m Milling Drum (15mm spacing)

Milling Width
88 in
Tool Spacing
0.6 in
Drum Diameter at Tips
42.2 in

System K 2.2m Milling Drum (18mm spacing)

Milling Width
88 in
Tool Spacing
0.7 in
Drum Diameter at Tips
42.2 in

Specifications

Cutting System

Milling Width
88in
Maximum Milling Depth
13in
Rotor Speeds
100 / 109 / 118 rpm
Number of Bits
185

Power Train

Rated Power
630HP
Engine
Cat C18
Maximum Travel Speed
3.7mile/h
Maximum Milling Speed
328ft/min

Weights

Operating Weight
74737lb
Transport Weight
66139lb

Dimensions

Operating Length - Conveyor Up
47.64ft
Operating Width
10.2ft
Height - Canopy
13.29ft
Maximum Truck Clearance
15.94ft
Minimum Right Cutting Radius
5.91ft
Minimum Left Cutting Radius
6.56ft
Conveyor Swing
60 degrees from center
Transport Length
40.78ft
Transport Width
8.89ft
Transport Height
9.84ft

Service Refill Capacities

Hydraulic Tank
29.9gal (US)
Cooling System
22.5gal (US)
Fuel Tank
292.7gal (US)
Engine Oil
17.2gal (US)
Water Spray System Tank
898.2gal (US)
Diesel Exhaust Fluid (DEF) Tank
12.4gal (US)

Standard/Optional Features

Standard Equipment:

  • Operator Environment
    • Ground control keypads
    • Single high-resolution LCD touchscreen display
    • 12-volt power receptacle
  • Cat Connect Technology
    • Cat Product Link
    • Cat GRADE
  • Conveyor
    • Grease tensioner
    • Material removal boost feature
  • Rotor System
    • Automatic plunge-cut
    • Automatic transition feature
    • Obstacle jump
    • Three cutting speeds
  • Powertrain
    • Auto engine idle control
    • High capacity cooling system
    • Dual propel pumps
    • Automatic load control
  • Hydraulic System
    • Dual pump hydraulic propel system
    • Traction control
  • Service And Maintenance
    • Sampling ports for Scheduled Oil Sampling (S·O·S℠)
    • Power hood
    • Platform-level engine oil dipsticks
    • Rotor chamber water spray system
    • Air compressor
    • Accessory drive system
    • 3400 L (898 gal) onboard water tank
    • Side water fill valve
  • Safety And Security
    • Platform handrails
    • Signaling/warning horn
    • Wide-dispersion LED work lights

Optional Equipment:

  • Operator Environment
    • Dual high-resolution LCD touchscreen displays
    • Hydraulically folding canopy with LEDs
    • Air-ride suspension seats
    • Windscreens
  • Cat Connect Technology
    • Inboard ski
    • Sonic sensor (averaging or string line)
    • Ground level grade controls and displays
  • Conveyor
    • Dust abatement system
    • Remote camera (loading conveyor)
  • Rotor System
    • System K Rotor - Course (25 mm)
    • System K Rotor - Course (18 mm)
    • System K Rotor - Standard (15 mm)
    • System K Rotor - Fine (8 mm)
    • System K Rotor - Micro (6 mm)
    • System H Rotor - Micro (6x2 mm)
    • Diamond bits
    • Bit bucket trays
    • Pneumatic bit removal tool
    • Tool holder extractor
    • Rotor turning device with pendant control
  • Powertrain
    • CE certificate
  • Hydraulic System
    • Water tank transfer pump
    • Fuel transfer pump
  • Service And Maintenance
    • High pressure washdown
    • Low pressure washdown
    • Additional spray bars
  • Safety And Security
    • Perimeter LED strip lights
    • Magnetic LED work light
    • Warning beacon (fixed or magnetic mount)
    • Truck signal lights
    • Remote camera (rear, front, magnetic mount)

Attachments

System K 2.2m Milling Drum (8mm spacing)

Milling Width
88 in
Tool Spacing
0.31 in
Drum Diameter at Tips
42.2 in

System H 2.2m Milling Drum (6x2mm spacing)

Milling Width
88 in
Tool Spacing
0.25 in
Drum Diameter at Tips
42.2 in

System K 2.2m Milling Drum (15mm spacing)

Milling Width
88 in
Tool Spacing
0.6 in
Drum Diameter at Tips
42.2 in

System K 2.2m Milling Drum (18mm spacing)

Milling Width
88 in
Tool Spacing
0.7 in
Drum Diameter at Tips
42.2 in